Adjusting the white head by pushing down that vibrator head was the exact fix. I almost threw away the trimmer cause its like 30 years old after I dropped it and it started making a horrible noise. Glad I investigated and someone else did all the foot work. Many thanks.
A tip to lessen the existing thread in plastic getting stripped by a metal screw when re-assembling parts: After insertion, rotate the screw with minimum pressure ANTI-clockwise at first, until you hear or feel the screw 'drop' indicating that both threads have aligned. Then rotate the screw clockwise as normal until firm.
when I turn it on, the small blades is moving little bit to left. I think this is cause of the white piece is not center, its like turning more to right side? how should I do?
My clipper makes ALOT of noise (I havent used it for almost 4 week after travelling). I cant fix it, I tried playing around with the screw that holds that vibrating arm spring, even at the tightest it makes alot of noise. :(
Start with the WAHL official website to check for stockists in your country. In Australia, we have quite a number. Hopefully, you got one where you are
Hi I have a wahl legend combo a v9000 version I think the clipper has a lot vibertion i adjusted the power screw but still there is a vibertion to the clipper, is that normal or should i tweak or change anything inside? although the clipper cut good but sometimes the blade starts to shake
Adjusting the white head by pushing down that vibrator head was the exact fix. I almost threw away the trimmer cause its like 30 years old after I dropped it and it started making a horrible noise. Glad I investigated and someone else did all the foot work. Many thanks.
@@Bobbakerfield Thank you for taking time to leave a comment. Really appreciate it and glad that someone found it helpful. Cheers
A tip to lessen the existing thread in plastic getting stripped by a metal screw
when re-assembling parts:
After insertion, rotate the screw with minimum pressure ANTI-clockwise at first,
until you hear or feel the screw 'drop' indicating that both threads have aligned.
Then rotate the screw clockwise as normal until firm.
Awesome! Thank you. Will give this a go!
Oh yes Thank you I will practice !
I appreciate how well everything was explained 🙂👍🏽
Thank you for the comments. Really appreciate it!
thank you for making this video... I learned so much
Thank you for taking the time to comment. Really appreciate it.
Thank you, help me save my 25 year old clippers. G R E A T !
@@democracybacksliding thank you! I hope it helped out a bit!
when I turn it on, the small blades is moving little bit to left. I think this is cause of the white piece is not center, its like turning more to right side? how should I do?
I'm no expert but as shown in the video, perhaps straighten the flat metal piece or I suggest buying a replacement from your local Wahl dealer
My clipper makes ALOT of noise (I havent used it for almost 4 week after travelling). I cant fix it, I tried playing around with the screw that holds that vibrating arm spring, even at the tightest it makes alot of noise. :(
Where do I find the parts
Start with the WAHL official website to check for stockists in your country. In Australia, we have quite a number. Hopefully, you got one where you are
Hi I have a wahl legend combo a v9000 version I think the clipper has a lot vibertion i adjusted the power screw but still there is a vibertion to the clipper, is that normal or should i tweak or change anything inside? although the clipper cut good but sometimes the blade starts to shake