How to rehub a boat propeller.
HTML-код
- Опубликовано: 8 авг 2022
- Using a hydraulic press to install a rubber hub bushing into a stainless steel boat prop.
The insertion tool used in this video is called a hub insertion funnel.
There really is not a lot of info about them on the web. Most prop shops just custom-make their own. Any good machinist can make them. Its basically just a steel funnel with the small end the size of the hole in the prop and the large end slightly bigger than the new hub. Im not sure if he still does but anyone interested can check with Mike at Propeller Equipment Supply CO Inc.(PESCO) in Charleston, SC, He used to make and sell them.
Tools needed to rehub a prop: At least a 20 ton shop press will work and the proper size hub insertion funnel.
This is only needed for pressed in brass spline rubber cushioned hubs.
Hub kits like XHS and Flo Torq 2 should not need any special tools to replace them. If they are stuck in the prop it is likely from corrosion. - Авто/Мото
can i use a Raker prop for Johnson Evinrude on my Yamaha? with a hardware kit?
Im new to boating. We spun our prop and it happens to be this old school rubber hub assembly. Is it easy to change to a plastic hub? Can I just plug and play or do I have to change some things in the outdrive as well? Thanks in advance
Can u please give me a part number for the insertion funnel or was this made at a machine shop?
Bonjour quel et les mesure l'outil pour le hub que tu viens de filmer
Is the cylinder that reduces the size a home made tool? Can't find one anywhere.
Have you figured out what this tool is
Do you use the sleeve as a guide? And how much press do I need. There isn't anyone local to do it. But have access to presses at work
Have you figured out what this tool is
Its more of a funnel that compresses the rubber into the prop. Its not recommended to try yourself. A lot can go wrong or damage to the prop or hub. If you only have one to do it would probably be best and cheaper to mail your prop to a prop shop for repair.
What do you call that insertion funnel. Couldn’t look it up any where
I have updated the description to answer your question. Thanks for watching!
How much should I expect to pay a shop to do this? Thanks
A guy wanted to charge me $400.00 I told him to fuck off!!! It’s ridiculous
noticed the splines are on the opposite side of the hub nut. Is this the proper direction to install the hub bushing. If so mine was installed incorrectly. 87 Johnson 150 GT
This was the correct way.
Hi ejer do i get the replacement rubber? For Volvo penta sx 19splins🙏
Check with your local prop shop.
Hello. I called at America Nautics and they told me that there is no rubber for my propeller. This is the propeller series: Quicksilver 48 13702 A41 21P for Yamaha 150 hp
Please help me find the rubber ! Tks
Can the prop be used right after the press?
Yes but you must go at idle speed forward for 5 minutes then the same backwards. Then your good.
Thank you
Saya salah satu pengguna Kipas Mesin Yamaha 40Pk saya butuh kipas untuk muatan 7-8 orang