I had the same problem, but there was neither a light nor a display error. He just didn’t want to go down and turn it on all the time. Then I pressed the park hold button a couple of times and pulled the parking brake button back and down, drove one lap and then somehow everything was in place again.
Mksaozooaoqoott the only thing I could it be possible to get the same the same the same the same the same the same the same the same the same the same the same the same the same the
قال المدرب قياده السياره اذا لم يعطيه تلميذ مال مثل ما يطلب ما في شهاده قياده السياره اعطينا 3000 سياره اعطينا 3000 يورو لسه ما طلب سعر سياره فقال العمل في التوف لي ماذا لم تحط النظاره وانا لسه ما طلعت السياره لغه فحص قياده السياره قال انه هو بيته الأمر ولا احد يستطيع ان يحاسبه لانه يستطيع انا طالع شهاده لابنائه وهو كبير وانا صغير ومعترف عليها اذا لم اخذت الشهاده ترد المال الى الى /// ماذا قال قانون الحكومه لي الشعب او الناس
Exactly! I don't understand why people (even professionals) tend to use an open-end wrench when they could be using a box-end wrench or socket. No point to ruin hands and no point to round off the bolt.
He haven't gloves but he do the job correctly ! Thanks for tutorial. I have a question about the rear break, if there's the electric parking brake i know there's to unlock the electric motor with the maintenance soft via ODB. But before to do the rear pads change, it's necessary to unlock the electric engine of the electric brake parking, when you open there's to push the brake piston like in the front brake, my question is to push the rear piston it's OK like for front brake just pushing with a simple pusher (flat spacer) or there's to PUSH AND ROTATE with a pusher (teeth spacer) who have teeth will lock in the piston head to make push and rotation at the same time? Thanks for reply best regards.
![How to change front brake discs on VW GOLF 7 [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/kqlJm2tT4rU/mqdefault.jpg)
I gave you a thumbs up like , for doing all this with one hand.
Thanks man, appreciate your help and video. Have a great day👍🙏
Merci bien Monsieur!
Trés précieux, votre video!
Bonnes chances
Cheers mate just done them after watching you piece of cake 👍
You should use torque wrench for tighten the caliper bolts to 35Nm
Thank you. Very helpful. Now you don't need to use any lubricant for bad ears where connect with bracket ? Thanks
Good video and instructions. I’ve this to do on my daughter in laws tonight
Could you show replace of rear brake disc please?
Palec hore za ten tripod,alebo stojan čím točíš videa 👍
Lepšie sa pracuje s oboma 😉
I had the same problem, but there was neither a light nor a display error. He just didn’t want to go down and turn it on all the time. Then I pressed the park hold button a couple of times and pulled the parking brake button back and down, drove one lap and then somehow everything was in place again.
Clear video, used gloves is better for your hands ( brake dust in the wounds ) 👍
Grande come sempre!!!!!!!
thank you so much for this. awesome. can you please show replacing the spark plugs and also the clutch on mk7 golf TSI please
hello, i converted front brakes from288mm to 312mm do i have to do adaptation with vcds?
There is ATE lubricants for pad and for brake piston.
Record Rear change new pads pls
Seems the brake disk need preplacement too
Dude, use gloves..Almost every video when you doing something on your car, u have blood on your hands.
good video
Super!!!!!!
Where is your workshop?
Thanks for the sharing！and please do use gloves！
Do you need scan tool to wind back piston for front pads or is it just rear ?
just rear
Those discs are done
You are 👍
great video! at 14:01 what does the green symbol on the dash mean? parking brake in green?
Kriwhk
Mksaozooaoqoott the only thing I could it be possible to get the same the same the same the same the same the same the same the same the same the same the same the same the same the
@@rorykiff8503?
..on my 2015 TDI, that green indicator tells you that PARKING BRAKE (handbrake) in engaged.
It means auto hold is engaged
Mozes mi reci zasto. Moj auto ima crni ausspuf koji sensor ne radi
Kakve godine se napravi automobil. stariji automobil je normalan ako postoji crni ispuh
good work ..Your country
Kao da si Balkanac....🤣🤣🤣🤣👍👍👍
North west balkan. Slovakia
@@golfwagen4173 ok man.👍😉😉😉😉😉😉
Nice video.
Blood, sweat and tears. 👍
Thank you for showing!! Nice job! But. Please use gloves!! 😁
don't we put grease on anymore to stop rattling / squeaking?
Yes it it always recommended to put anti seize on most places of the caliper and brackets
Always put brake grease on
قال المدرب قياده السياره اذا لم يعطيه تلميذ مال مثل ما يطلب ما في شهاده قياده السياره اعطينا 3000 سياره اعطينا 3000 يورو لسه ما طلب سعر سياره فقال العمل في التوف لي ماذا لم تحط النظاره وانا لسه ما طلعت السياره لغه فحص قياده السياره قال انه هو بيته الأمر ولا احد يستطيع ان يحاسبه لانه يستطيع انا طالع شهاده لابنائه وهو كبير وانا صغير ومعترف عليها اذا لم اخذت الشهاده ترد المال الى الى /// ماذا قال قانون الحكومه لي الشعب او الناس
Always use ring spanners or sockets, I'm surprised he didn't cut his knuckles or wrists, back yard mechanic, dangerous!
Mohol by si dať aj zadné.... neviem ako to je s tou parkovacou brzdou
ved sa na to chystam ....... už rok.
Torque your bolts.
It’s ok I think lol😂
Dude wear some gloves and use closed wrenches (ring or socket). No point to ruin hands and make them bleed. Good job thou.
Exactly! I don't understand why people (even professionals) tend to use an open-end wrench when they could be using a box-end wrench or socket.
No point to ruin hands and no point to round off the bolt.
He haven't gloves but he do the job correctly ! Thanks for tutorial.
I have a question about the rear break, if there's the electric parking brake i know there's to unlock the electric motor with the maintenance soft via ODB.
But before to do the rear pads change, it's necessary to unlock the electric engine of the electric brake parking, when you open there's to push the brake piston like in the front brake, my question is to push the rear piston it's OK like for front brake just pushing with a simple pusher (flat spacer) or there's to PUSH AND ROTATE with a pusher (teeth spacer) who have teeth will lock in the piston head to make push and rotation at the same time?
Thanks for reply best regards.
u went from easy to difficult because u do not use the right tools. I will never do that~
That's terrible job, everything in the wrong way around. Guys, don't do like that!