How to fix Xbox 360 Red Dot Of Death [EASY]
HTML-код
- Опубликовано: 10 сен 2024
- NOT FAKE! it works, BUT EVERY TIME YOU TURN THE XBOX OFF, YOU HAVE TO REPEAT THE PROCEDURE. A LESS LESS THAN 15 MINUTES.
I don't take any responsibility in case of damage to your Xbox
I forgot to tell you how I resolved it definitively. Basically I opened the xbox 360, and with only the motherboard I cleaned it with alcohol and with a brush. With the brush I deeply cleaned all the components, using a little force with the brush under the cpu and various components. Then I took a very normal hair dryer and at most I aimed all the heat jet on the CPU for at least 15 minutes. Then for another 15 minutes I ran the hair dryer all over the back side of the motherboard (I recommend the hair dryer be as close to the motherboard as possible). After, I again spent 5/10 minutes the hair dryer on the front of the motherboard pointing all the components. Lastly, I passed again with ethyl alcohol in depth on the components.
Yours was blinking i presume?
Its a sad day my 360 has just red ringed after 9 years of playing on it
I feel you
Same here lad
Yeah that happened to me too and I was so close to finishing fallout 3
R.I.P after 9 years of service
I just tried to launch my Xbox so i can see my old profile but its seems like the profile gone forever with this dot
This is the most complicated "easy" tutorial.
For people who know what to do maybe?
Mine has problem
Most likely HDIM since it does not connect to it or something because I turn it on then it turns red in the middle with a red circle red ring of death but we clean it add new cooling past or something I forgot then after we clean it it showed red ring of death cooling ? Or HDIM
This is NOT a proper way of fixing it, You need to replace the XCGPU however, at the very least a reflow/reball will get it working for a much much longer rate for hopefully a few months possibly forever depending if its a cold solder joint or a faulty xcgpu. Unleaded solder melts at 218 degrees Celsius, heating it up with a towel can get it to like 60 degrees Celsius this is not hot enough to melt the balls all you did was make the balls stress and expand which is why it works for a little bit but a lot of consoles the issue is within the xcgpu NOT the solder balls.
Hi. Thanks for the video. It works because insulating the coolant with a cloth causes the processor temperature to rise. The purpose is to overheat the processor. The processor overheating is recommended for all electronic devices.
Why? Why overheating? Whats happens then?
Pls respond
so unplug the fun could works right?
This is awesome I didn’t think it would work but you surprised me thank you and god. I subscribe
Will there be a second part to show what kind of blankets we should use in this process!?😂
I didn’t take it apart but I wrapped it up in a coat and it worked just as well can’t believe it actually worked!
If you have to cover it with a blanket what’s the main issue with it? Would you know. Also thanks
umm ... they told me that doing this method resolve the problem. We don't understand the problem well, becuase there are people who say that you have to change thermal paste (it didn't work for me), or change the ram, or change the processor. fact I think it is the fault of the Ram and not the processor, because otherwise it wouldn't work anyway if the processor is broken
Prov_s thanks dude. Was it Microsoft that told you or?
no, I just tried to reason
From what iv picked up Microsoft solder the processor and so on to the mother board rather than embed them. So when the Xbox over heats a lot over time the soldering melts and they become disconnected. Putting a blank/towel over it like in the vid has a chance to melt said soldering again and reaffirming the connection.
My 360 s got the red dot of death and it turned back on perfectly but the main problem is it deleted all of my data that was saved to the console can anyone help with this issue I think I can just copy the stuff on the Internal hard drive and then put it onto another internal hard drive but I’m still not to sure what to do please if anyone can help tell me
How did you fix yours or did it fix by itself
“Easy tutorial” starts ripping the whole Xbox appart.
Does this acc work
Why would you not generate numbers?
I really appreciate your video it has worked for me 💯🙏 thank you so much
Covering the console with a blanket isn't a good idea there are much more professional ways of fixing it
Fkin hate does torx screw... I don't have torx screwdriver
I try but the fan stop working as soon as the red light come up
This doesn't fix it, at least not all xbox slim bc there are different cases
I lost hope, im not finding any ways to fix it, ima try this tommorow, i guess..
Ok, we hope
Prov_s Ay, it worked, thanks man. Kinda weird why it did tho. Was about to send it to microsoft.
Dude. No. What bad advice. And in 2020, even!
At this point I think I might just buy a new one for $30
Thanks for that, now I don’t I can do the pillow but I can pluck of the thing and turn it of like I don’t 15 minutes? And bet it’s going to work
For me this happened and I took out the hard drive and it fixed.
What if it doesn’t have one
@@diegomartinez2777 Red dots of death are caused by errors I think. If you don’t have a hard drive it means the error is caused by something else. I think this video is for that.
@@HorrorRade ok I guess that’s the solution and the reason is because my little sister kept turning it on and off repeatedly
@@diegomartinez2777 It could also be because it’s dirty because the person in the video cleaned their 360 and it fixed.
Why do u keep blurring out ur floor😅😅 are u embarrassed of it or something
You. Are sure. If it do not work
at this point i might aswell just buy an xbox one 😔
How about you make a video that's not sped up like that?
Because you can find a lot of videos about disassemble xbox
@@prov_s195 I haven't found any that look that easy. Kinda desperate as my 360 Slim is finally getting a light like that. Sorry for being rude. Just pretty stressed.
@@ThunderXtaTic ruclips.net/video/dFD94d6mDFE/видео.html have you tried this to take apart?
@@prov_s195 For some reason I was having trouble finding a vid like that. It turned out not to be an overheating issue like I thought though. I got a new 360 earlier today anyway so I'm all good. Again, I'm sorry for being rude. I was really frustrated when I wrote that comment
This works for me temporarily everything I us3 it I have to put in in the towel for at least 20m
其實不用拆機殼,直接用毯子包起來運行10分鐘左右就可以了😌❤
This doesn’t even work unfortunately
Bei mir klappt es net!!!
How is this easy
Its supposed to be easy for some reasons, but you can get tutorials on how to open your xbox like dude did on yt, still havent try but i guess it could work, i tried everything execpt for this
Well mine was bout to be 13 years old
no way this actually worked
Bro said easy 💀💀💀
I call bull. If you still get the red ring after covering it with blankets for 15 minutes, that means that method didn't work.
Wow,Thanks For The(NOT) Help
So this doesn't work?????
You 0osted this with conference too...
I don't know what's worse, him and his confidence or all the people in the comments following his directions. How absurd that anyone with half a brain would think that this is how you fix electronics. And if you have friends over to play, "hold on a second guys, my Xbox is cold I need to wrap it up in a blankie for 15 minutes"
@@MyNameIsJay5010 i mean it’s working for a lot of people so it’s worth a shot
@@VainDreamerGaming overheating a system is not a fix, not a repair it's a bandaid at best. A dirty one that fell on the ground before being applied. Take 2 minutes out of your day to do some research on this dipshits idea and you will see it's wrong.
@@MyNameIsJay5010 dipshit? I don’t agree with his methods, but bashing him because of it just seems too harsh. I dunno what happened brother, just hope whatever it is works itself out. 🙏🏽
I might place mine in a dryer or microwave lol
Thank youuu
This is not a fix
You are lucky that you fixed it😂 I’m joking😂😂😂😂
真的有用耶
Hahahaha
EZ*