The Foden recovery vehicle is nothing less than what it should be; a very robust & capable vehicle for towing, lifting & winching operations. It is always interesting & satisfying to watch the Foden accomplish any task with apparent effortlessness!
There were a few things I didn’t like about the Foden. The turning circle of 27 metres, the tilt angle of 27 degrees, the slew of the crane, the weight of 27 ton on 3 axles and the underpowered engine. It’s such a pity as otherwise a really really good but of kit.
Awesome. 9pm, Baby son is in bed, Wife is asleep, I can enjoy my late lunch after getting groceries, kick back and enjoy another great video of you folks. And on top of that it's a Foden video. Hooray!
hi, great to see 2 Fodens with the motor panels cabs, i remember when the army had both those fodens. the orange one was the s77 and was an artillery tractor.
The lifting power and noise of those Fodens is brilliant, I enjoy these extra none tank videos such as the engine swap in the earth digger the weekend.
This is one of only two channels on youtube that are an instant click for me.... the other one is Trail Mater - anyone enjoying the machinery and can do problem solving on this channel will probably enjoy Trail Mater too - offroad recovery service in Moab, Utah.
Impressive as the Foden was, can we talk about those trunks and all the beautiful oak they contain. 05:39 just screams HOUSE to me. So much timber sat there I wasted an hour at work just thinking about it. I really hope the wood goes to good use. 🤞
I imagine it will be sold to a mill and well used. There's probably a decent few hundred thousand pounds worth of quality hard wood on the back of that Foden.
@@mbak7801 I don't mean exclusively wood, and it's more of a primal feeling than a practical one. I guess it comes from growing up in houses with exposed beams, thatched roofs, wattle and daub walls, flagstone floors and solid fuel ranges.
Thanks to the lovely Lady who does the filming and probably the editing as well, without her life would be dull. I hope those trunks are going to a sawmill to be turned into useable timber planks? The Fodens as usual, do what Fodens have been doing since they were born, work.
That green cricket roller I believe is an Auto-Roller from the 1960's, I look after several of them and they still outlast the modern equivalents...."They don't build them like they used to" Although the original cork clutch can get a bit sticky but you have plenty of time NOT to panic on one of those things.
2 Fodens, bliss! But he's got a Hiab on the orange truck, oh they're some tree trunks, no wonder the Hewes crane was needed. Great action well worth watching and clearly a great time was had. Thanks 👍
in the 70s when i was in my tens we used to have a carnival type thing in Exhibition Park in Newcastle upon tyne. It was class. The place was full of chieftains, stollies, fodens all you can think of. a squaddie asked me to stop swinging on a chieftain's barrel. so i got in and tried to start it instead. great memories. thats why i like yr videos. bringing it all back!
I bet the people in Leicestershire love you with all the help you give them, well done Joe and company 👍👍👍👍 Also love how you have the BOSS filming she is a god send to your channel.
Watching this brought back many happy memories of me pulling out big timber and loading it with a aec matador on to our erf the best time of my life bring the 1970s, roy. 😊
I have only seen logs that big once before cut. One about the size of the first one. A friend of mine dropped into my buddies half ton Chevy pick up truck. The front wheels came off the ground 5 feet when it hit! He could barely steer the six blocks to the tree down because there was so little weight on the front axle, good times lol.😊
Good luck getting the Stolly in that large pond/small lake. I foresee you needing the Foden to pull it out after it sinks. It might put the owner off ever so slightly. 😂😂❤❤😂😂
I enjoyed this video! My father used to skid logs on the farm with mules in the 1920's and 30's. I thought that he would loved the enclosed cab in the video short of you cutting hay. He did the d=same thin thing with horses and mules. ! Early tractors were expensive. thanks for posting both videos.
Class! what amazes me is that vehicles deemed obsolete by the MOD procurement people did a fantastic job! great video mates keep it up. i could watch these all day. i wish i could make the tea at your place i love this old kit.
That big old Rolls Royce diesel sounds well. They were definitely not built for comfort those things but when it comes to shifting stuff, boy do they deliver. Love to see them getting to work 👍
Love your videos. Great fun to see your projects. You should get a better microphone so we hear you over the machines. Røde makes good one I think. And perhaps a go pro?
Again entertaining, love the content looking foward to seeing the Stalwart and T-34 progress, My Dad was in REME in the 60s A class mechanic worked on 432, stalwart, saracen and Cent tanks in Germany and Libya Sadly he passed away in 2019 wish he was around to watch your videos it would have been special to reminice with him as you struggled with the cent gearboxes and engines as well as 432 vehicles. Thanks for what your putting up it draws me back to great memories of my Dad.
I got wood, The Foden is a beast, loving the content Joe and Co keep it coming You two, From Tanks to anything Machinery. It would be great to see that beautiful Oak cut into Slabs, Great camera work by the way Love and Best wishes from Paul in Australia.
Look up the Sutton Hoo ship project, they're using huge, old oak trees, split with wedges and trimmed with side axes (adze I think they're called) to build a sailing replica of Raedwald's ship.
Looks like Marston Trussell, a good friend of mine ploughed the field with his mothers golf when failing to make the left turn towards Farndon just along the road from there. Also great memories of driving an old Escort through that Ford a few times, then making minor excursions through the long grass along the old Bunkers Hill field road, to clean the oil off a knackered gearbox just before somebody came to buy it.
There's a excellent book you can get from the Foden society website about their military and special vehicle division. From ww1 steam wagons to these beasts. Quite a story how they managed to win such a big contract, mainly because they designed, cast and manufactured all major components in house. Also interesting how they designed trucks to transport the UK's nuclear warheads!
Nice job!. Good bit of 'dosh' waiting there with that oak. On sell it to cabinet/furniture makers!. 🙂 Of course something had to 'happen!' 🤣 Nuff said!.
that must be an FH70 Gun Limber, converted, very similar to your recovery, never driven on of those, they went out of service with the FH70, many years ago, gotta love a Foden
Dear Father Christmas, do you remember that every Christmas since 2013 I asked for an Alfa 4C and I didn’t get one? Well this year I’d like a Foden, just like Joe’s - or even better, Joe’s Foden.
My mates Dad tried to drive through that ford many years ago in a Reliant Regal 3 wheeler when it was frozen over, all 3 wheels went through the ice and he was stuck. Look like he'd plugged the f***ker in! Haha😂
Be some nice planks out of those lumps, last one should have some nice colours running in it 😁. Gotta admit, 2 Foden’s sound well, don’t think it would be to much of a stretch to get the keys over a mogs 😳🤔🤔😆
The Forden is a truly great vehicle! Bits falling off in the water isn't good for your street cred but we will let you off because your channel is brilliant!😊😊😊😂😅
Heard a rumour that if your Foden 🔊🔥 throws its exhaust whilst navigating a Ford and is then flushed with beautifully clear river water it’s then fully ULEZ compliant.
Nothing beats seeing a Foden doing what a Foden does best... Apart from loosing its exhaust of course... 😮
Spontaneous straight-pipe-ification.
@@Brigadier9 +10 hp
I know you said some followers were complaining about the lack of tank-related videos but I really enjoy seeing you "playing" with your other "toys".😁
Archimedes: give me a lever long enough and I can move the world. Mr Hewes: give me the foden and I can move the world.
The Foden recovery vehicle is nothing less than what it should be; a very robust & capable vehicle for towing, lifting & winching operations. It is always interesting & satisfying to watch the Foden accomplish any task with apparent effortlessness!
There were a few things I didn’t like about the Foden. The turning circle of 27 metres, the tilt angle of 27 degrees, the slew of the crane, the weight of 27 ton on 3 axles and the underpowered engine. It’s such a pity as otherwise a really really good but of kit.
Like others have said, Foden doing what they were made for, and still as good as anything out there, solid beasts.
They are far from being as good as anything out there but yes got the job done ... Nice work 👏
@@youthussful todays stuff likes to Break easy 30 yrs plus of driving old to new 🤷🏻♂️
Probably still better than some newer
Wow🦾💪💪
You Can’t Beat them Old Foden’s 💯👍🏻🇬🇧
Awesome.
9pm, Baby son is in bed, Wife is asleep, I can enjoy my late lunch after getting groceries, kick back and enjoy another great video of you folks.
And on top of that it's a Foden video. Hooray!
Amazes me how effortlessly the Foden just deals with weight such a well balanced truck for lifting
hi, great to see 2 Fodens with the motor panels cabs, i remember when the army had both those fodens. the orange one was the s77 and was an artillery tractor.
The lifting power and noise of those Fodens is brilliant, I enjoy these extra none tank videos such as the engine swap in the earth digger the weekend.
got home from school just now and it dropped 47 seconds ago
This is one of only two channels on youtube that are an instant click for me.... the other one is Trail Mater - anyone enjoying the machinery and can do problem solving on this channel will probably enjoy Trail Mater too - offroad recovery service in Moab, Utah.
It was a sad day when they stopped making Fodens, so many happy memories I had in them, nice to see them working again
Foden's double teaming a mighty oak tree, hopefully not for firewood.
The fun never stops. Complete legend that Foden.
Impressive as the Foden was, can we talk about those trunks and all the beautiful oak they contain. 05:39 just screams HOUSE to me. So much timber sat there I wasted an hour at work just thinking about it. I really hope the wood goes to good use. 🤞
That reminds me - got to order some logs for the wood burner! ;-P
I imagine it will be sold to a mill and well used. There's probably a decent few hundred thousand pounds worth of quality hard wood on the back of that Foden.
Houses are made out of masonry not wood. Furniture yes but a sub optimal choice for housing.
@@mbak7801 I don't mean exclusively wood, and it's more of a primal feeling than a practical one. I guess it comes from growing up in houses with exposed beams, thatched roofs, wattle and daub walls, flagstone floors and solid fuel ranges.
What about the new-build Sutton Hoo ship? Not sawn planks, but adze-trimmed and wedge-split.
Proper Job ! Love it, that oak must be worth a few quid. Love seeing twin beasts in action!
Proper job pard👍
Really good to see Two old Foden's still earning their keep 👍👍👍
Thanks to the lovely Lady who does the filming and probably the editing as well, without her life would be dull. I hope those trunks are going to a sawmill to be turned into useable timber planks? The Fodens as usual, do what Fodens have been doing since they were born, work.
Like watching an old episode of Thunderbirds - even the motors sound as good 😁🇬🇧🫡
Cannot beat the sound of a Foden under load 🤙🏻
That green cricket roller I believe is an Auto-Roller from the 1960's, I look after several of them and they still outlast the modern equivalents...."They don't build them like they used to" Although the original cork clutch can get a bit sticky but you have plenty of time NOT to panic on one of those things.
2 Fodens, bliss! But he's got a Hiab on the orange truck, oh they're some tree trunks, no wonder the Hewes crane was needed. Great action well worth watching and clearly a great time was had. Thanks 👍
There's allot to be said for the Foden, not least the reflection in the windscreen... 😬
Good work all round team.
in the 70s when i was in my tens we used to have a carnival type thing in Exhibition Park in Newcastle upon tyne. It was class. The place was full of chieftains, stollies, fodens all you can think of. a squaddie asked me to stop swinging on a chieftain's barrel. so i got in and tried to start it instead. great memories. thats why i like yr videos. bringing it all back!
i would but it's too far to reach. i live in the north east.
Mr Hewes I can watch you all day playing with your Foden doing what there good at love your videos always different always learn something new thanks
I bet the people in Leicestershire love you with all the help you give them, well done Joe and company 👍👍👍👍 Also love how you have the BOSS filming she is a god send to your channel.
Ted's the CEO, she's just the Manager :-)
@@antronargaiv3283 And what a manager 👍
I like his tele-handler pickup hitch. Very neat :o)
Watching this brought back many happy memories of me pulling out big timber and loading it with a aec matador on to our erf the best time of my life bring the 1970s, roy. 😊
Very nice those Fodens sound amazing
I love watching you build and then put this kit to work.
I have only seen logs that big once before cut. One about the size of the first one. A friend of mine dropped into my buddies half ton Chevy pick up truck. The front wheels came off the ground 5 feet when it hit! He could barely steer the six blocks to the tree down because there was so little weight on the front axle, good times lol.😊
Who knew a Foden could be exhausted 🤔😏
Good luck getting the Stolly in that large pond/small lake. I foresee you needing the Foden to pull it out after it sinks. It might put the owner off ever so slightly.
😂😂❤❤😂😂
I enjoyed this video! My father used to skid logs on the farm with mules in the 1920's and 30's. I thought that he would loved the enclosed cab in the video short of you cutting hay. He did the d=same thin thing with horses and mules. ! Early tractors were expensive. thanks for posting both videos.
Class! what amazes me is that vehicles deemed obsolete by the MOD procurement people did a fantastic job! great video mates keep it up. i could watch these all day. i wish i could make the tea at your place i love this old kit.
That big old Rolls Royce diesel sounds well. They were definitely not built for comfort those things but when it comes to shifting stuff, boy do they deliver. Love to see them getting to work 👍
Your Foden has a very suitable number plate, RBV, Really Big Vehicle!
Love your videos. Great fun to see your projects. You should get a better microphone so we hear you over the machines. Røde makes good one I think. And perhaps a go pro?
Throat mic?
Awesome video thanks nice bit of Oak😊🚛🚛🚛🚜🚜🚜🇬🇧🔧🙏
Wow just Wow,you guys have so much fun,I run an old mercedes 814 7.5t, would love an old foden like that,Awsome, thanks for sharing
That was a good panning shot of the two Fods and the Union Jack flying on the left.
Again entertaining, love the content looking foward to seeing the Stalwart and T-34 progress, My Dad was in REME in the 60s A class mechanic worked on 432, stalwart, saracen and Cent tanks in Germany and Libya Sadly he passed away in 2019 wish he was around to watch your videos it would have been special to reminice with him as you struggled with the cent gearboxes and engines as well as 432 vehicles. Thanks for what your putting up it draws me back to great memories of my Dad.
Absolutely amazing.
Love those fodens.
Great stuff 😊
It always makes me smile when I see a guy wealding a chainsaw with no protection. Crossing your fingers doesn't work..😂
I got wood, The Foden is a beast, loving the content Joe and Co keep it coming You two, From Tanks to anything Machinery. It would be great to see that beautiful Oak cut into Slabs, Great camera work by the way Love and Best wishes from Paul in Australia.
Look up the Sutton Hoo ship project, they're using huge, old oak trees, split with wedges and trimmed with side axes (adze I think they're called) to build a sailing replica of Raedwald's ship.
Tusen takk for god underholdning 👍🤗👍
The perfect kind of video
Action and the sound of
Speed & Power
from the mighty Foden
Hoon love the exhaust removal.
Great stuff , great fun, it makes me smile as ever. Phil Woollard
I love your videos! I’m laid up in the hospital and watching them keeps my mind distracted. Keep up the great work
That Joe is the best ,most useful vehicle you have . And bloody sounds good too until ya bust the exhaust off lol . All the best gang , play safe 👍👍😎
Could listen to this all day.
Best game of cricket I ever saw , I liked the golden exhaust trophy too . F-O-D-E-N , 💚⚒🏁
They are an amazing bit of kit 🤘😎🤘
Love the inboard sound of that truck :-)
I enjoyed the video and reflections😉
What happened to the oak trees?
The run back to the truck with the exhaust in hand is just too funny!
furniture makers and luthiers will love your mate in ten to fifteen years
Looks like Marston Trussell, a good friend of mine ploughed the field with his mothers golf when failing to make the left turn towards Farndon just along the road from there. Also great memories of driving an old Escort through that Ford a few times, then making minor excursions through the long grass along the old Bunkers Hill field road, to clean the oil off a knackered gearbox just before somebody came to buy it.
It is indeed. I played there a couple of times as a teenager. Fell off my Yamaha YDS7 in the ford once - VRC717M, where are you now...
Very enjoyable to watch mate from South Australia
Proper job by proper British Lorries. Take it the orange Foden was a FH70.gun tractor. Happy belated 30th for the other day,keep the vids coming.
There's a excellent book you can get from the Foden society website about their military and special vehicle division. From ww1 steam wagons to these beasts. Quite a story how they managed to win such a big contract, mainly because they designed, cast and manufactured all major components in house. Also interesting how they designed trucks to transport the UK's nuclear warheads!
One can make some awesome furniture from those trees!
Hell yeah, big trucks and hard wood
Whoops. Oh well looked like fun and im sure a bit of weld will sort it out!
GOOD JOB WELL DONE EVEN SOME GOOD DRIVING FROM THOSE OLD BEASTS .😮
Wow, we were totally spoiled by this one. We got twice as much Foden this time!
That's my kind of video title. Come on Foden! 💪 lmao that ending!
Great stuff!
Nice job!. Good bit of 'dosh' waiting there with that oak. On sell it to cabinet/furniture makers!. 🙂 Of course something had to 'happen!' 🤣 Nuff said!.
Great video, and I think you emptied the stream 😂
that must be an FH70 Gun Limber, converted, very similar to your recovery, never driven on of those, they went out of service with the FH70, many years ago, gotta love a Foden
Dear Father Christmas, do you remember that every Christmas since 2013 I asked for an Alfa 4C and I didn’t get one? Well this year I’d like a Foden, just like Joe’s - or even better, Joe’s Foden.
Thems some nice oak sticks👍
Brilliant..... Just brilliant 👍
The Foden is a beast!
Nice looking area there.
Good to see the old girl doing what she is meant to be doing 👍👍
They are impressive beasts at work. Except when the wobbly bits fall off!!!
Bit of welding to finish the day. Nice footage seen from a tree mans view. Cheers
What a lovely pair, just as God intended.
That's the best ford fail I've ever seen! Testament to the vehicle that the only bit you mucked around with was the bit that fell off 🤣
Nice drop of top and lop for winter twelvemonth!
My mates Dad tried to drive through that ford many years ago in a Reliant Regal 3 wheeler when it was frozen over, all 3 wheels went through the ice and he was stuck. Look like he'd plugged the f***ker in! Haha😂
HURRY BACK JACK !!
JOE'S GETTING BORED!! 😂
I’ve wrote it before, so forgive me being boring, what a piece of kit that ex military Foden is
Nice one👍🏻
Could do with a couple of those Oak logs myself, nice work.
Those are some big logs.
Liked the bit at the end
Be some nice planks out of those lumps, last one should have some nice colours running in it 😁. Gotta admit, 2 Foden’s sound well, don’t think it would be to much of a stretch to get the keys over a mogs 😳🤔🤔😆
Hi, that looks great , so envious, love to drive those beasts. You should sell the driving experience , fanatstic!! Many thanks from Nr Chester
Fellow Nr Chester viewer here too.
I used to live in that telephone box, brOught back some memories seeing it again!
I was half expecting you to throw a chain on those stumps and give a tug or two just for giggles.
Thats the next video 😂
That looks an "exhausting" day 🙂
Do love the old british lorries!
Double declutch! Have not seen one of those for a looooong time.
The Forden is a truly great vehicle!
Bits falling off in the water isn't good for your street cred but we will let you off because your channel is brilliant!😊😊😊😂😅
Nice old FH70 Foden tractor 😊
Heard a rumour that if your Foden 🔊🔥 throws its exhaust whilst navigating a Ford and is then flushed with beautifully clear river water it’s then fully ULEZ compliant.