UNBOXING OF LASERPECKER 3 - METAL & PLASTIC HANDHELD LASER ENGRAVER
HTML-код
- Опубликовано: 15 июл 2023
- Hello my friends.
We were provided a LASERPECKER 3 laser engraver by LASERPECKER to do a video along with test. Because I feel this is a useful tool to include in our business, we gladly accepted the offer.
We have two different production jobs that require sequential serial number on non-ferrous castings. In this video, we put the LASERPECKER 3 through the test with very nice results along with testing on gray cast iron scale.
If you are in the market for a verstile laser ingraver, check out the link below.
with any purchase over $800, you can save $50 by using (Clarke50) in the coupon code
www.laserpecker.net/products/...
amz.run/6qT3 
Наука
Fromer US Navy Laser Systems Safety Systems Cat II qualified here. The laser is ablating and sintering the surface, relying the ablated material and adhering that material to the surface. It leaves a tactile surface, but its typically just a few thousands of an inch. Now, a Word About Safety with Lasers; Read the manual and the SAFETY WARNINGS like your scared shitless of going blind. In the early days of laser designators being deployed in the military, there were numerous 'sight injuries' (total blindness) reported. Understand a laser beam that has enough power to etch iron, has far more power than is needed to blow away that 0.3mm Fovea that you depend on to see everything. If you are nearsighted and wear corrective lenses of any kind, even one of those lasers used in price scanners at the grocery store or a presenter uses can do it. If the power of the laser is high enough and green, blue, or violet, those do not need 1,000th of the power of a red light laser to blind you. (those green targeting lasers on the M-2A's were only fielded for a short time as they were declared a blinding hazard and a maiming weapon by the Hauge)... So, READ THE MANUAL. And keep little kids and your friend Kenny from hanging out looking over your shoulder, those are the ones who are too dumb to not stare directly into the damn thing.
Thanks for your input👍
Clark that is AMAZING....Thanks my friend
Shoe🇺🇸
Clough42, when he was showing off the XTool, mentioned a marking spray called CerMark if you ever have something to mark where you're not happy with the direct marks on the surface.
my father would tell me "when all else fails.. read the instructions"
There is an acronym for that RTFM, I think you can work out what the letters stand for.
Thank You Clarke
Hey Clark, Dan Murphy from Canada, this video with the laser engraver is awesome ,I look so forward to watching many more of this content, your a superstar.
Lol, thanks for the compliment my friend, I'm just one of you guys👍
Looks like a nice kit thanks for sharing
Technology is amazing!
Looks like a great kit. I'd love to see some experiments with side by side comparisons when changing one variable at a time.
Looks like a good product! Enjoyed the video.
thanks for doing this video. I would spread out the "MADE IN MISSISSIPPI" just a bit as letters are a bit to close (adjust kerning). it may be OK on paper but the laser is "spreading" the edges just a little bit (I'm guessing)
Looks like you have a great new tool to enhance your business. Thanks for doing a video on this.
You’re just an amazing guy! Love all the things your into! Often thought I would get one too! But now…. 😊!
Steve M
This is a great idea by the manufacturer!! I respect your opinion so I'm tickled to see you do this and get one!
Me too, couldn't have come ar a better time👍
Looks Amazing! I've read that ventilation is pretty important with laser engravers, your shop should be fine with the open spaces there. Many use an air purifier.
You are correct, an open window and exhaust window fan will work also
And as well , all your other amazing videos.
looks Good!
Nice looks great and works.
Thanks Randy👍
Good video. Can you set this on a larger piece and engrave through that rectangular hole?
Correct, I meant to illustrate that but ran out of time. Yes this is portable and, there are several videos on other applications
Handy little unit, looks easy to navigate and run. I can see hundreds of uses.
Stan this is very easy to use. Everything is pretty much self explanatory. As one does a few test runs, it seems to give predictable good quality results.
Congrats on the new piece of equipment Clark! I don't have a use for one but it's still really cool and, I would've been doing the same thing you did by engraving anything and everything I could. 😂👍👍
Yep, wife locked up her heirloom china after this showed up
Wowser!
Tech is coming out more and more. CNC is becoming common in life. This is a show Stopper !
Nice! It will save a lot of grief 😅 Thanks for sharing 👍
When I was a 16 year old I did prototyping work on the lazer pecker in high school.
Lasertrician? Laserologist? Can we add Laserographer to the list?😎
Looks like high quality
Better fix the purple thermos lol
I would try grinding or filing the surface first for better definition. You also can mask the area with paint and then follow the laser with a mild acid etch.
I really like the new toy Clarke.
I will check them out
We could use one.
Donny
So far, I have engraved everything from iron to rock Donny👍
Clarke, Lazer pecker even had their advertisement on your video.
Speaking of setting paper on fire, a coworker bought a burger from a chain restaurant, and brought them in to work. He commenced to put the burger in the microwave in the wrapper that had aluminum in the wrapper. After a few seconds, he had the wrapper on fire..
I will have to share some of my microwave misfortunes sometime, including the hard boiled eggs that blew the door off
Those tedious scrolling number pickers in the software would mean a no-sale for me. Just give me a numeric keypad arrangement for speedy entry.
A commercial just popped up for number 4, 🤯 wow really?
👍👍👍👍
more proof we live in the future
I like how you’re just picking random settings without any real reason
will it do tattoos?
I'll try it on Josie tomorrow 👍
@@windyhillfoundry5940 I fear we might not be hearing from Clarke for awhile after this. LOL
I can see you using that pretty often…
Lol, I want one because it sounds like a porn name 😂
$1,500 for a laser engraver???!!!! Still out of my price range - The same thing happened 10 years ago with 3D printers - No Thanks I'll wait a lil more