Draft Top Lift Review
HTML-код
- Опубликовано: 13 окт 2024
- We love a cold beer and know that smelling and seeing the color of a beer contributes to the overall beersperience, that's a new word right? We have been checking out Draft Tops since they came out and the new Draft Top Lift is version 4.0. This version boasts a big improvement, it can remove the lid as you take it off. Let's drink topless and have lift off in the Draft Top Lift Review.
Hit that SUBSCRIBE button to see more fun drinking and tailgating videos.
Support us by checking out our Amazon Store is a one stop tailgating shop for finding many of the products that we love:
www.amazon.com...
We appreciate any SUPER THANKS to help support our videos!
Follow us on
Facebook: tailgatingchallenge
Instagram: / tailgatingchallenge
Twitter: tailgatingchall
Text Message Alerts:
Text the word “tailgating”
To: (866) 498-1908
Msg and data rates may apply
4 msgs/mo
Reply STOP to to cancel
SUBSCRIBE to our email list for info on weekly giveaways:
tailgating-cha...
Interested in licensing part of this video? Email us: tailgatingchallenge@gmail.com
#drafttop #beer #lifehacks
After using the Draft Top Lift several times, I was able to have it leave a clean top without that little burr. I rotated it several times like you showed in the video and then put my finger on the tab (to pin it to the draft top) and rotated it in the opposite direction until the lid came off.
Thanks! I’ll have to try that. Did it leave the little imperfection if you did the “normal” way?
@@TailgatingChallenge Yes I got the same imperfection, one time (out of four "normal" tries) it was even worse than what happened to yours.
@@wrenchdoozer Thanks! Ill try the reverse at the end next time and see. Appreciate the tips.
I have not had the burr problem. I also have not popped the top even slightly before using. I think popping the top may cause the burr. I tried reversing direction once but the lid when in the can.
great review. I just got my Lift today and have done 10 cans of different beers and sparking water brands. only 1-2 had the burr but I chalk that up to user error. I didn't pre-open the can tab but made sure I had it "locked" in position before rotating the can. it actually works better than I thought it would. my only improvement suggestion would be for a couple small magnets in the base so it could stick to the side of my fridge when not in use.
Agreed magnets were on their last version and they should have kept on this one too!
Cheers! Thanks for watching! We have tons of other fun videos showcasing unique products, would love to hear what you think:)
Hope you have hit that SUBSCRIBE button too👍
Been using a Version 3 for a couple years. Got the Version 4 today and it's great. I used the 3 mostly for 16 oz cans of Zero Ultra because it didn't work well with 12 oz cans of Diet Coke or whatever. The 4 works great for both.
Yes! We have every edition so far! They keep getting better:)
Over the first couple of weeks I had my Draft Top Lift I probably opened a dozen cans. Every single one of them had the same little burr. I had first tried on beer cans but then tried on soda cans as well as a few hard seltzer cans, all had the same little burr. I reached out to them about the burr, and even mentioned your review video and they said it should not leave a burr. They replied with:
"The fact that there are several can variations on the market, and our tool was designed to work on all of them, it could have something to do with the can profile. One other recommendation to consider would be to push down on the tool slightly so it stays flat on the rim of the can while rotating. The reason for this is that it ensures the cutting point starts and stops at the same height, leaving a clean cut. The image you shared with us seems to indicate that the cut is starting higher on the rim and ending much lower, which leaves that unfavorable outcome."
They offered to send me another one or issue a refund. I elected for a replacement because I love the idea of the tool. While waiting for the replacement I of course tried their recommendation to the best of my ability and still was getting the burr. The replacement arrived, tried it out on some beer cans at first and got the same burr. I wrote them again, and they ended up refunding me. In their emails, they certainly did not seem concerned. Overall I like the design, but that little burr makes me hesitant to use it, I certainly do not want to be swallowing sharp pieces of metal.
Agreed I just note the one spot and don’t drink from that edge as the rest is smooth but seems like an opportunity to for upgrades in their next edition
Recently purchased one of these I've opened about five cans with it now and it does a good job opening the cans and leaving a smooth edge but it does leave little metal shavings inside the cans regardless what they say I promise you it leaves metal shavings in the cans they are small enough to where they float but still
We still haven’t seen any in ours
Do you have pics or videos of this happening?
Metal shavins not safe to drink..but whats the point.cause im interested..i love my
Krakins
We just received ours, opened two cans without reading the instructions. Typical dude move. Worked just like i was hoping...perfect! No burr.
Beers drink like a mug, thanks for the great addition to our party supplies.
Very nice! Did you see the new product they came out with too we did a video on, the can clip? ruclips.net/video/9ahCsvNbW1I/видео.htmlsi=xBjCMhQAYFZOb4dP
Amazing!! I have the previous Draft Top but given im in the UK the shipping costs are fairly high for these, that said…! Is it a major upgrade to the last models as if so id be tempted to get a few of them! Cheers!
So I’ve tired all 4 now and this is my fav one yet.
It is easiest to cut the top and lift it off. My two cents but regardless cheers and thanks for watching
As a retired flight attendant the 1st thing I thought when I saw this was "that looks like a campact, lightweight travel can opener!" Do all beer cans get smaller at the top? Would this work with regular cans like soup, etc? And if not, make one that does! How much does this weigh? That's really important for travel!
Hey the can size could be different and this is more focused on beer cans than say a can of soup.
Now this will work for soft drinks and other things in a similar can.
Thanks for watching! We have tons of other fun videos showcasing unique products, would love to hear what you think:)
Hope you have hit that SUBSCRIBE button too👍
No, this is made for aluminium. Soup cans are steel. No way you can just twist and cut a steel can.
There are can openers that open food cans both traditionally and by cutting the the top off
Does anyone read instructions? You don't have to rotate it more than one revolution. You have to put it so the tab lines up in the middle, squeeze the handles, turn one revolution, release the handles, then lift up. Works like a charm every single time.
I get that little thing sometimes. If you put it back on and spin it a few more times, it’ll push that down.
Nice thanks for the tip and cheers!
Great product!
Cheers thanks have you seen the crazy commercial version they made for bars:
ruclips.net/user/shortsjsi0y-WDZVA?si=J9J0x4HJn6rECZpL
Doesnt work on smaller cans does it?
Does not with this version thanks for tuning in and hitting SUBSCRIBE
Hi.. Soft drink can comes in various size (the top rim).. Does this work on every size.. I m a restaurant owner and i m trying to buy this for my business only if it wrks on all sizes of cans
It's supposed to work but like with everything results may very
This is the standard size can and doesn’t adjust.
They just came out with a new product for businesses that may fit your needs?
Thanks for watching! We have tons of other fun videos showcasing unique products, would love to hear what you think:)
Hope you have hit that SUBSCRIBE button too👍
Can you use it on an empty can assuming it still has it's ring pull?
You can but it’s harder as you may dent the can, assuming you are trying to use the can for some art?
@@TailgatingChallenge many thanks I got hold of a mk3 and it seems to do it ok on empty cans.
@@TailgatingChallengeI am interested in one to process empty cans to make a solar air heater (See cansolair or search for pop can solar furnice).
I actually want something that can cut both ends wide open without removing the rims that enables stacking them.
I'm literally drinking a voodoo ranger juice force while watching this
Haha one of my favs! Thanks for tuning in and smashing subscribe
Can this be used on the bottom part of a can as well ?
This will not cut the bottom of the can the same way.
Thanks for watching! We have tons of other fun videos showcasing unique products, would love to hear what you think:)
Hope you have hit that SUBSCRIBE button too👍
In the amount of time it took to cut the top and lift that top off, I already popped the top, beer bonged it, and lost my top. Does this company help find tops after they are lost? I can't be runnin around topless...
Edit: I'm at work.
Haha 😂 that’s another way to drink Topless!
The other Pro Tip... use the pop top, pour beer or other beverage into a glass or frosty mug. Lessens the chance of getting a ripped lip from an errant sharp edge of the can, too.
"to avoid the downsides of a microwave, use the stove" like shut up you boomer dork, it's a product of convenience. you can take "frosty mugs" hiking or to a ball game if you want to, nerd.
@@chazzatheninja OK, kid. Take a hint, learn how to identify snark when you see it without the "/s" sign... Gotcha.
Why would you want the top off?
Drinking topless if more fun 🤩
Being able to see and smell
Craft beer is part of the experience and it accommodates their new can clip that people either love or hate check it out:
ruclips.net/user/shortsLwK-9pU2LPo?si=g7VvEKmEvJ-Y1jfw
By the time you got that top off I would have already drank two
Nice shirt, bro. Go Gamecocks 🤙🏼
Goooo Gamecocks! Thanks for tuning in and hitting that SUBSCRIBE to support
🍺 🐔
I really don't get it I don't see what the difference is between opening a beer the normal way or twisting the whole top of the can off I don't get it I don't see the purpose of it what's the difference it's a novelty that's all it is I can open the beer and poured in a glass and have the same way as if I cut the top off the can I'll say it again I just don't get it
So it can be a fun party trick but also if there aren’t any cups this turns the can into a cup.
Thanks for watching! We have tons of other fun videos showcasing unique products, would love to hear what you think:)
Hope you have hit that SUBSCRIBE button too👍
A lot of your taste comes from smell. It is a different experience if you don’t seal the smell away in a can….
i feel like there's cheaper ways to put your lips on a sharp metal edge
Haha it’s 99% smooth:)
Pro tip: bottles, a glass.....
So most of the time that is how I roll too but this just adds some fun and presentation
I don't understand the "ripped lips" comments lol.... Why is everyone biting or "lipping" the inside of... anything.....??? Or am I just drinking everything wrong? 🤣
lol you are drinking correctly!! Haha cheers!
日本版の発売はまだなのに紹介されているから勘違いし、表現のええ加減な業者から利用できないUS版を購入してしまいました。
Did you ever get one?
drink it normally
Me being normal…you must be new here haha
Thanks for tuning in!
No thanks -- looks like too much work and a lawsuit waiting to happen after I slice my lip open and ruins the rest of my day of drinking
It’s fun but your points aren’t lost on me. It was pretty dang smooth but we have one spot in each can that we are cognizant of.
Thanks for watching! We have tons of other fun videos showcasing unique products, would love to hear what you think:)
Hope you have hit that SUBSCRIBE button too👍
Just bought this, does not work, watched all videos and read all directions. It has the roller but nothing to cut. THIS IS A TOTAL SCAM PRODUCT DO NOT BUY!!!
Was it draftop or another brand? Which one did you get?
It works. Trust me, I have one. You have to put it so the tab lines up in the middle, squeeze the handles, turn 360 degrees, release the handles, then lift up.
The cutter is on the roller.