Utilities and permits vary A LOT depending on your municipality. For my area in Louisiana I spent $400 on permits $215,000 on 27acres (that was in a flood zone so I had to build it up over time) $1,800 Water meter $3,500 Sewer system $4,000 Electricity The wind rating is 150 engineer stamped (that is the building alone without spray foam and framing on the inside) The bathroom counters and sinks are included in the countertop price of this video. I guess I should have elaborated a bit more there. I didn't include the appliances because you can spend as much or as little as you want depending on taste. Link in the description to the blueprints for the home and the receipts.
Why would you waste money painting over the spray foam (ceiling) when you are not going to see it? Especially painting it black? It'll be a lot darker in the "attic space" if you need to make repairs later on. Should've left it white/yellow.
@@DudeWeCanBuildIt I think he means the fact you painted the spray foam and then have a ceiling under it, unless you did not put a ceiling up in some areas of the house?
@@angelbailey1169 I will now spend the rest of my night researching how to join this habitat for humanity 🤣 thank you for the side quest my fake friend.
A plumber in Chicago would crap in your toilet, clog it, then tell you with a straight face that you should definitely call someone to come out and take a look at your clogged toilet.
What's a buddy of the video maker supposed to do? Yeah, I just built a cabin in Florida for $100 , according to this guy's reasoning. All you have to do is skip steps, no permit, cheap materials. All that matters is the cheap price in the headline.
I got my kitchen cabinets on Facebook marketplace from a family that was very clearly wealthy. They were custom made Oak with full wood sides and the knobs and hinges were also special ordered. There were tons of cabinets and even included a matching set for the laundry room. $300 bucks. Guys. If you can, always get used with these sorts of things. New isn't always better on a budget. (Also no scratches, they were remodeling and got new custom cabinets ordered and needed them gone, for context)
Worked in condos. When the wealthy remodel they just want the old gone. I refurnished my entire apartment with furniture worth 20k +. Leather, hardwoods, china, crystal, quality silverware. Don’t care what anyone says, working for the wealthy is better.
I was looking at some cabinets on fb marketplace as well but for 5000.00 super high end kitchen but because they were doing a remodel thy were selling.
I'm a licensed contractor. Great job on deciding what to hire out. And labor saving. One thing that you could have saved money on was the insulation all you need is 2 inches of closed cell foam in the walls and 3 inches on the ceiling. Because of the properties of closed cell there's no benefit to adding more. Also you are correct it is much better to hire sprayfoam out. And in most cases all the " good" sprayfoam applicators will run roughly at the same price
05:25 He says he put two inches of closed cell foam in the walls and on the ceiling as a vapor barrier, than 4 more inches of open cell on the ceilings.
@@DudeWeCanBuildIt another contractor here. Spray foam is money well spent. My house has 5 to 6” and it’s way better than anything else because it’s completely sealed.
Lol, friends don't cost money. They are relationships that take time. Years of helping each other out and being there for one another. Always give more than you take. Then there will always be a hand there when you need it.
@@DudeWeCanBuildIt that's funny I did all that and most of my so called friends haven't reached out to me for years now. Just used me and didn't even say thanks.
Friends come with “I own an air conditioning company”. Our builder fishes with the electrician who is cousins with the plumber and besties with the excavator. The great thing about that is all of them know each others work and being a small town, neighbors talk. It behooves everyone to do quality work-especially since the lender is also the inspector and knows all them guys.
Imagine if you had a $1 million dollar budget. That's 34 bedrooms,24 bathrooms,12 living rooms, and a 15-car garage on your 18k square foot home. Oh, i mean, fortress 😆
@@keinlieb3818well that’s where society is now. Let’s break the cycle and start buying land and building communities like these to HELP with the cost of living and create a new society that’s affordable fabulous and filled with good people. (At the price of this video)❤
4:11 i did something similar with steel building. Due to possible penetration from flying objects during storm events I put 3/4 plywood along the entire exterior of the house framing inside the metal building with 8in walls 12 centers. Added protection and security!
I wonder how much it would cost to add concrete to the exterior walls. Insulated Concrete Forms, ICF, uses styrofoam and gets filled with concrete. Probably expensive enough that limiting it to a storm shelter room would be needed.
So happy you enjoyed it! We have a google doc in the description with the blue prints, layouts and receipts if you need anymore information on the build. Feel free to reach out for any further information. Thank you for the support!
Your channel will definitely grow if you keep putting out content like this. This was outstanding and informative, the price breakdown is stellar and very beneficial to see and the video editing was good as well. Can’t wait to see what’s next..(I might just have to build a barndominium for myself, now).
Thank you so much! We have so many hours into our videos but this one especially. We hope to be able to make content as good as this if not better for years and years to come! Thank you for being apart of our journey
Thank you for this. My husband and I have a large family and we are planning on building a 5,850 sq ft barndo early next year that’s includes a 1,250 sqft shop space . We hoping to spend less than $600,000 which is our total budget. My brother-in-law is a contractor and is coming from out of state to help us. Hopefully we don’t lose our minds by the end of this.
@@DudeWeCanBuildIt With 7 kids and my parents-in-law living with us. I can’t wait to get into a larger space. 😂 We outgrown our 2,000 sqft house. However, to get a larger house in this current housing market for under 650,000 in our area is like finding a needle in a haystack. Plus spec homes nowadays are cheaply made. Thankfully my brother-in-law is from Texas and has experience with Bardominiums.
Very affordable and super nice. A 500-100 square foot condo where I live is easily 200k. Your place looks great! I think it's cool you spent extra on a couple things that mattered to you
Well thank you so much. It’s amazing what you can get for the price especially in today’s economy. Thats what makes these things great! Strong, customizable and affordable. We appreciate the kind words!
New Subscriber ..... TOTALLY am IMPRESSED at how economically $$ you "sourced" your materials for this build .... I am a retired residential contractor in Massachusetts, and I KNOW the cost of building products in "my area" of the country .... (20 - 30% higher, here .... ) GREAT job !!! And "Thank You" for posting this ....
Great job. One item I noticed when you added the fiberglass insulation bats, I think you should have used non-faced. Using the faced insulation plus the spray foam gives you a vapor barrier on the inside and outside trapping moisture in the walls.
Hey, I have been watching RUclips for years. This is by far the best video I have ever seen in regard to content, knowledge, and just overall good information. Thanks
No doubt, & this video & _ALL_ the "cost to build" videos can never (HAVE never) give you the actual cost if you had s/one do the work for you, as *99.99%* of those who wish to build would require. In o/words, there's no way to really find out what a build will end up costing. Great video & good information...don't get me wrong, but still many unknowns.
@@DudeWeCanBuildIt aHA, *THAT'S* what I (and most others) was looking for. Now, just to follow up & confirm s/thing though... That *$160* number would be parts/labor for _E V E R Y T H I N G_ shown in the video...JUST as the home is shown in the video, "move-in" ready? Should we decide on one, I'll see if I can secure a plan that includes a materials list, so a builder knows EXACTLY what he's be working with to get a HARD #. *Thx!*
@@DudeWeCanBuildIt that’s alll day 160 is light!!! My sis bout a prebuilt home for 190 . 160 is a steal . Idk if it can be done up here in New England I haven’t heard or seen but I have a feeling it can be done
@@WatUpOck Aside from permitting and snow load, I don't see it being much different. They have stronger models of the metal building for increased wind and snow loads
Nicely done man. This is great content given the current market. There are so many of us looking for alternatives to the conventional unaffordable homes, and this is different than many other options I’ve seen. Great job
Thank you so much! The market for housing is criminal right now. Researched and found these types of homes and went for it. We already had a little experience in RUclips so thought people should know that these options are out there. Happy that translated through the video! Thank you again for watching and supporting
You sir just earned a subscriber. I am looking to build a barndominium this year in rural South Carolina on our family land. I am a software developer and the precision and thoroughness of your cost breakdown is something I only see in my profession. One of the best and straight to the point pricing breakdowns I've seen on RUclips. Excellent job!! Don't be surprised if I reach out to you for extra guidance lol.
From the plumbing and concrete pad to the finished product at that cost is pretty amazing. I never thought of making one of those garages that is installed in one day into a house, lol ..a brilliant idea and probably half the cost of actually ruff framing a house of that size. All of your ruff framing andca complete structure in one day , cant beat that !
Thank you for taking the time to make this video, it’s very inspirational. I’m just beginning the journey to build something like this and I’m definitely taking some of your ideas.
Take all the ideas you can so you make the best decision for yourself! We appreciate you watching the videos and being along with us 😁 If you have any questions about anything please feel free to reach out!
Awesome! I’ve seen a huge increase in demand for this type of builds. 60% of the leads I get are people who want to get a Barndo shell. I just wish people would take the time to do some research and have a general idea of what they want. While our tubular steel frame buildings are a lot cheaper then red Iron, it is harder to customize and make the shell look like a regular house. But we got some great options. With our direct attach option, you can attach your plywood or Sheetrock directly to the building’s walls, saving you time.
I'm at the beginning of my journey to do this exact thing, so if you are driving in rural North Carolina and see this house's identical twin brother, it may or may not be me. Phenomenal video. Loved everything about it.
@@1234ahhh1 The only things I saved on is the labor for the AC install and Electrical which comes out to 8K. That being said, a homeowner can do those trades themselves here in Louisiana. So, it actually doesn't change anything. Plus, if I had done the plumbing myself, it would save even more!
@@1234ahhh1 it’s “building a home for $87,000.” Not “I built a home for $87,000 and you so can YOU!” Let’s be real the general consensus of the video is you can get a lot more for a lot less than buying some new build for $400k with 12% apr for the next 45 years of your life.
Thank you for sharing your build with us. I really appreciate it. I am trying to escape being a rent slave and own my own property. Its so expensive trying to even find a property with a house on it as they all want too much regardless of how run down the house is. I think my only option is to find virgin land 30-40min outside the city and develop it myself. I have been looking at shipping container builds, manufactured homes, tiny homes, and ect. But a metal home seems like a happy medium between the affordable options. I like how easy it is to set up and build up. I think I can afford to get a loan to do most of the exterior work (utility connection, foundation, metal building purchase and setup). While I save up and use my own labor to build up the interior. All I need is the doors and windows installed. I can still live in the building while finishing the work. My mind is flowing. Thank you.
Be careful with trying to get a loan from a bank to do this type of construction, you'll have to make sure to check your locations building codes and banks underwriting construction standards.
You said you were an AC contractor as I recall….Maybe do a few videos on that work as well. Maybe talk through design, layout, steps you take, how to size a system, costs for different types of systems, different brands and your thoughts about them, custom vs a standard installs, parts, etc. With your cost breakdowns, we understand it’s dependent on the part of the country you live in, availability of equipment and so on. But, if you do a video breakdown the way you did with the house, that would be great!
How did the ply bead come out cheaper than drywall? Everywhere i look where i am at its way more expensive than drywall. You paid 29.78 per sheet and where i am the drywall is $10-$13 a sheet. Am i missing something ? Genuinely asking. I am in Denver.
When you factor in the tape, mud, and labor to finish the drywall, it's much more expensive. You could do it yourself for cheap, if you want to. I didn't
This is the first time I’ve ever seen one of these videos where the owner checks their ego and hires out when they know they aren’t qualified to install/build something. You did absolutely everything right and this barndominium will last you a life time, well done👏👏
Where are you located? 12" deep for a footer is a money saver. No Frost line there? Is the building code different because of the barndominum construction? So it's a big slab- on- grade? Great video. Great result. Thanks.
I like that you didn't traditionally sheetrock the interior. Everyone always assumes you MUST cover all your walls with sheetrock/mud, but it's labor intensive to install, it's fragile and it's difficult to repair. The battens look great and give some depth to the rooms, instead of a void cube that everyone loves for some reason. Good move!
I just finished a total rehab on a 1,600 sqft 175 year old house. Spent just over $50,000 above the purchase price, and it was $79,975 total cost, for everything. So, your price is right on point. Mine isn't in the middle of nowhere though, sadly. Trying to sell!
This sort of thing shows just how important it can be to be social and be open to learning new things. You saved probably 100k+ just by getting to know some people and learning how to do things yourself. Not to put a dollar value on good relationships, but when bad company costs so much it's hard not to appreciate how much good company is worth.
Where did you build this. I might have missed that part. I thinking of building one in northern AZ as a weekend getaway/ part time rental@@DudeWeCanBuildIt
Perfect video. So for roofs, standing seam is recommended because the screw down metal ones have the issue that after a decade or so, the screws get loose, lose their waterproofness and begin leaking. Is that not an issue with the sidewalls, the way you have them built ? For insulation, since it is so cheap, any reasons to not double the wool insulation for a higher R value ? Did you put the same insulation in the roof ? Why did you go for a custom size for your interior doors (since you built the framing, why not build it at a standard size and save with a standard door) ? I will build a house next year, this video is very helpful, thank you.
Standing seam is ideal and expensive. I will have to replace washers every 10 years or so. It is not an issue on vertical surfaces and I'm building a wrap around porch. 36" doors are what I wanted. I didn't calculate enough room for the door plus the doorjam and trim, so I had to downsize.
I enjoyed this simply because he gave prices.it gave us a true idea of what this costs without that mark up from crooks..thanks and it turned out great.would have enjoyed a final walk thru...
Nice build man, forgot to include cost of lot, septic, well. Also cost of permits to build. But 88k is definitely way better than 350k new homes being built rushed and bunch of mistakes!
If you don't mind sharing, how much was the lot and utilities? Are you on public utilities or do you have well/septic, what about electric? Also how far away is your location from the closest city/suburb for access to services/amenities like groceries, stores, businesses, etc. I'm curious, because I want to do the same thing. It's hard to find a lot for a decent price that is anywhere near civilization. Low price lots are often super rural, and don't have access to water/sewer/gas/electric/internet/etc. In some cases it might take nearly that whole 80k budget just to get utilities ran to the property. Going off grid wouldn't be any cheaper.
I can tell you what it cost me, but depending on where you're at, the prices can vary A LOT! Water meter $1800 Sewer system $3500 Electricity $4000 My house is 600' off the road. I buried the electrical conduit and water lines myself. I have 27 acres that was purchased for $215k. It's a 10 minute drive to Walmart in the nearest town.
@@DudeWeCanBuildIt wow, most places I've looked for properties, anything even close to 27 acres would be like 1 hr or more just to a grocery store, or it would be millions of dollars.
Being next to a sizable body of water I understand going with a pad foundation, Other than that, I prefer having a full foundation/basement. But that's just my own personal preference.. basements are an awesome thing to have for many reasons.. if they won't be problematic.
Basements in Louisiana, Miss or Alabama are rare. There are some in the Northern parts of these states; sometimes more of a half basement where the home is on a hill and the basement floor is an ground level for the back yard.
It would be great if there was a video on the permit process and how each step was permitted and completed. I looked at the permit applications for the township I am interested in, and it seems the township assumes there will be one builder for the whole build. I could be missing something, since I am not familiar with the process.
The permiting process is different depending on where you live, so no one instructional video would be applicable for everyone. Where I'm at, I just told them I am building it myself and I did not need a general contractor.
More than the building itself, most people can't get into the LAND; If you bought 10 acres where i'm from , it would almost be 1.2m.. Wells are a 14 month wait, and $60k.
@@DudeWeCanBuildIt my dream is to purchase some property and for my husband to have a pond that he can go hang out and maybe stop it with fish. Love your channel!
About the in the slab plumbing, is it ever done to frame around the pipes so the pipes can be accessed (no concrete on top of the pipes) later? So you have the pvc pipes in framed slots, pour the slab around that, then you'd put the flooring on top of that so it's not seen. That way if some pipe work needs done, you just lift some flooring instead of flooring and ripping up concrete. Maybe the pipes could be set up to be along the walls so you'd not even be stepping on the flooring over that
This is the price breakdown for the house only. Utilities and permits vary A LOT depending on your municipality. I can include those prices, but it would be misleading for anyone that doesn't live in the same area as me. The bathroom counters and sinks are included in the countertop price of this video. I guess I should have elaborated a bit more there. The dishwasher was $400. I didn't include the appliances because you can spend as much or as little as you want depending on taste. I talked about the mirror in the walkthrough video. It's something I had laying around, so it didn't cost anything.
We left the dirt work and septic stuff out thinking it wasn’t relevant to the actual build but everyone seems to want to know. We will put it in the comments soon and I’ll tag you in. Sorry about that
Septic prices are depending on your county.. I paid for mine $9300 concrete tank, bed installation and county permits/inspection in South San Antonio tx.. but the mobile homes sales office I got info from quoted us $15,000.
It would have been cheaper if you went two story. A 30x30 is alot less than a 30x50 building and alot less concrete. I have been planning mine for a couple of years and am breaking ground this fall. The wind rating is the same My home is going to be a single slope roof. It will be 24x60 ( 24x24 garage and 2300+ sq ft living).
Oh wow I didn’t know that! Please grab our email if you can send us update pictures if you can remember. A two story version would be so cool to see. Beyond happy for you. We know the feeling of starting all to well. The finishing is even more satisfying! Enjoy
You are right in line with what I am planning, 24x60 with 2 story living quarters. Are you working with an existing design or are you designing it? I've had a hard time finding examples that are close to that idea. Thanks.
@@Behine.DeChilis my restrictions is + 1700 living area. So 1700 ÷24 = 70. So 2 story would be 24'x35'. I would like my 3 main rooms to be at least 12' so 3x12 = 36. 24'×36' slab (1728 sq ft) would do . This doesnt take in account the garage and storage.
We like that you just named off everything you liked and we appreciate you liking our stuff! Thank you so much for watching and subscribing. We have a video coming Friday with a little minute skit in the beginning! Hope you enjoy 😁
This is a fantastic video! I'm looking into making a 20x30x16 barndo, with 2 stories. Thankfully i don't need my interior to look so nice so I'll save some money there. Best part for me was watching the insulation, I'm planning on also using closed cell plus fiberglass, though i might only go for 1 inch of spray
That's awesome! You can build it! Every environment has different temperature/humidity concerns. Talk with an insulation professional and do some Reddit research to make sure that won't become a source of condensation and eventually mold in your area
for anyone wondering, plumbing isn't really complicated or difficult. only thing you need to remember is "shit flows downhill" just keep a 1/4 inch per ft slope and have a vent stack. that's really it
Great video! Custom cabinet maker here… Those are not “custom” cabinets. You may have a few custom sized cabinets, but those are very basic. For the linear foot of cabinetry you had, most custom cabinet shops would run you over 20k. Sounds and looks like yours came from a production shop. And that’s a great value choice! But I wouldn’t call them custom.. people will be quite surprised when they contact an ACTUAL custom cabinet shop and the quote comes back as double or more of the price of your cabinets.
Great information! As someone who has put kitchens together with store-bought cabinets, this definitely seems custom fitted to me LOL. I definitely see what you mean, there are no recessed into the wall cabinets or anything specialized about my cabinets.
Omg! I built my house and drywall finishing made me hate life. If I had known about the exterior drywall I could have saved 6 months. Thanks for a brilliant idea. I'm about to start the mother in law pad and I'm definitely going to do the exterior drywall installed vertically with batten strips. Such a time saver
I would the have put a brick ledge on the foundation just in case I wanted to, in the future, add masonry work or any other exterior additions. Also if you live in the Southern Tornado Alley like I do, either incorporate into the layout a small steel container (like a storage pod size), or use steel reinforced concrete to make one of the closets so you have a storm shelter and safe room.
loved the video! We're on the more serious side of building one of these but our issue is we live in northern PA and have to deal with winter while we build so our option is to build a large 40x80 building and get the shell and floor in and park our 5th wheel in the building while we finish everything but trying to find a contractor around here is all but impossible, they either dont call back or they give you the " I really dont want to price".
It’s engineer stamped 🤷🏽♂️ We can post a link to the plans. And that’s just the wind rating for the building. Not including the spray foam and framing on the inside. We are in hurricane valley we can’t afford to lie on a wind rating nore build something that couldn’t sustain those winds. Only way we can prove it is once a hurricane comes through we can post update pictures 😂
@@DudeWeCanBuildIt I’m up in Mass NY CT AREA (New England) . I’m trying to get situated with a long term work project for my union then I’m ready to go fr bro because with these banks 🏦 need work history to get a loan.
wow that is a nice build man. the prices are so reasonable... is my area spray foam was qouted 20K for half 2 small beds kitchen and living room. your work is inspiring man!
@@DudeWeCanBuildIt Oh yeah, I'm converting a 14x40 barn to a tiny home and already spend 70,000$ and I still don't have my well, and the cabin is not completed as well as scam contractors. That doesn't count permits.
@scottloftin1730 Barely making it work, my well for water is running me 35000$. My homestead is tiny compared to your build, just the land was 150,000, but most land is 350000$ and up, with no development on it.
@@heknows5418 There's no place to go, I'm in unorganized township, my taxes are 800/year, anywhere else is 6,500/year. I'm retired, I can't afford anything else, just running hydro was 21000$
Absolutly. We think the same, maybe around $160k for someone else to build. Not including permits and other things. Permits vary town to town, state to state. And not a fan of the pond? Thank you for watching! We genuinely appreciate it
You don’t say WHERE you’re building- I HATE Building Inspectors from 40 years as a GENERAL CONTRACTOR…. Can’t get a Building Permit in less than a year!!! Never mind wanting to build a steel structure. No wonder CA is in the dumper!!
I have property that I'm going to build rentals on and what you did here looks to be an excellent option. I really like the low maintenance a building like this has. Video was very well done.
Thank you for the kind words! I have some rentals also, and this has been a consideration. I have several mobile home rentals that are constantly needing attention. Keeping maintenance and operational costs down is a big deal with rentals.
Didn't build a barndominium. A barndominium has a drive thru section tall enough to park a 5th wheel triple slide out camper or a bigass motor home inside of it.
Utilities and permits vary A LOT depending on your municipality.
For my area in Louisiana I spent
$400 on permits
$215,000 on 27acres (that was in a flood zone so I had to build it up over time)
$1,800 Water meter
$3,500 Sewer system
$4,000 Electricity
The wind rating is 150 engineer stamped (that is the building alone without spray foam and framing on the inside)
The bathroom counters and sinks are included in the countertop price of this video. I guess I should have elaborated a bit more there.
I didn't include the appliances because you can spend as much or as little as you want depending on taste.
Link in the description to the blueprints for the home and the receipts.
Why would you waste money painting over the spray foam (ceiling) when you are not going to see it? Especially painting it black? It'll be a lot darker in the "attic space" if you need to make repairs later on. Should've left it white/yellow.
@@travelinman482 I’m not covering it. I left it exposed because I like the exposed look
@@DudeWeCanBuildIt I think he means the fact you painted the spray foam and then have a ceiling under it, unless you did not put a ceiling up in some areas of the house?
@@travelinman482 look up at any point when he's in the kitchen....
@@00M6TA The whole living room, kitchen, dinning room is all exposed. The only thing with ceilings is the rooms
I have no friends… so this would cost me $580,000.00 😂🤣 we should start a fake friend group to help build each other’s houses 😂
I will advocate for this! 😂
It's a real thing ! It's called Habitat for humanity
@@angelbailey1169 I will now spend the rest of my night researching how to join this habitat for humanity 🤣 thank you for the side quest my fake friend.
I feel your pain! So I would join "fake friends club". With the purpose of building for each other.
Where do I sign up for the fake friend home building group please? 😂
My husband comes from a family of 10 kids....7 boys. They would NEVER come together to do this. You are fortunate.
That's wild. I've built relationships with great people and it pays off in the long run.
@Marie-If8ut i have a total of 26 siblings and they would not either 😂
@@SweetTandCompanyTontianna I have a total of 3,945 siblings, and they all hate me!
@@Luke13579 14 from my dad and 5 from my mom plus 7 step that I grew up . I am the only one with my mom and dad .
Damn, what a way to shyt on your husband's family in public 😮
A plumber in Chicago wouldn't even crap in your toilet for $2800
This comment wins the comment section for now 😂
...And That's what you/They get your living in Shitcago. Enjoy being a Slave the rest of your life.
@mortor235 +3200% more in Chicago Heights
And this is why no one wants to live in Chicago lol
A plumber in Chicago would crap in your toilet, clog it, then tell you with a straight face that you should definitely call someone to come out and take a look at your clogged toilet.
This is the best home building video on the internet. You show exactly the information that most people want to know. Thank you.
Thank you so much! We really appreciate the kind words and love that we encompassed everything and made it digestible.
Says the guy who has apparently never seen any other home building video before.
What's a buddy of the video maker supposed to do? Yeah, I just built a cabin in Florida for $100 , according to this guy's reasoning. All you have to do is skip steps, no permit, cheap materials. All that matters is the cheap price in the headline.
Thank you for proving that when you build your own, you don't have to accept the ridiculous prices of builders. This is the way.
I see no reason to spend $300k+ for a cheaply built spec house.
@DudeWeCanBuildIt
Especially when it's 10 feet from your neighbor. You did good, and as long as there's electricity, your business will flourish.
Lolz. He is the fucking builder.
@@nailbanger2 Thank you!
@@Ryan-xv3kc It's true!
I got my kitchen cabinets on Facebook marketplace from a family that was very clearly wealthy. They were custom made Oak with full wood sides and the knobs and hinges were also special ordered. There were tons of cabinets and even included a matching set for the laundry room. $300 bucks. Guys. If you can, always get used with these sorts of things. New isn't always better on a budget. (Also no scratches, they were remodeling and got new custom cabinets ordered and needed them gone, for context)
That's amazing! There's no limit to how resourceful you can be or how much you can save with some elbow grease!
Worked in condos. When the wealthy remodel they just want the old gone. I refurnished my entire apartment with furniture worth 20k +. Leather, hardwoods, china, crystal, quality silverware. Don’t care what anyone says, working for the wealthy is better.
That's awesome!
They were paying for cabinet removal at that price - nice find!
I was looking at some cabinets on fb marketplace as well but for 5000.00 super high end kitchen but because they were doing a remodel thy were selling.
I'm a licensed contractor. Great job on deciding what to hire out. And labor saving. One thing that you could have saved money on was the insulation all you need is 2 inches of closed cell foam in the walls and 3 inches on the ceiling. Because of the properties of closed cell there's no benefit to adding more. Also you are correct it is much better to hire sprayfoam out. And in most cases all the " good" sprayfoam applicators will run roughly at the same price
Thank you, I appreciate the comment!
05:25 He says he put two inches of closed cell foam in the walls and on the ceiling as a vapor barrier, than 4 more inches of open cell on the ceilings.
@@FixItPleaseJ yes, and additional fiberglass insulation in the walls. More insulation is better in my environment
@@DudeWeCanBuildIt another contractor here. Spray foam is money well spent. My house has 5 to 6” and it’s way better than anything else because it’s completely sealed.
@@DudeWeCanBuildIt But nothing in the floor, just VB under the slab...
Man...forget the house, how much did it cost to obtain such great friends!? 😁
Lol, friends don't cost money. They are relationships that take time. Years of helping each other out and being there for one another.
Always give more than you take. Then there will always be a hand there when you need it.
@@DudeWeCanBuildIt that's funny I did all that and most of my so called friends haven't reached out to me for years now. Just used me and didn't even say thanks.
@@DudeWeCanBuildIt Speaking of old friends, I gotta come down and visit!
@@drewsprague88 You definitely need to!!!
Friends come with “I own an air conditioning company”. Our builder fishes with the electrician who is cousins with the plumber and besties with the excavator. The great thing about that is all of them know each others work and being a small town, neighbors talk. It behooves everyone to do quality work-especially since the lender is also the inspector and knows all them guys.
Imagine if you had a $1 million dollar budget. That's 34 bedrooms,24 bathrooms,12 living rooms, and a 15-car garage on your 18k square foot home. Oh, i mean, fortress 😆
That would be absolutely wild!
Or... that would be 11 houses, sell 10 of them for $400k ea for a total of $4m and retire, or repeat as necessary.
If I had a $1 million dollar budget. 15-car garage 1 bedrooms and 1 baths
@@keinlieb3818well that’s where society is now. Let’s break the cycle and start buying land and building communities like these to HELP with the cost of living and create a new society that’s affordable fabulous and filled with good people. (At the price of this video)❤
And a partridge in a pair treeeee 😂
4:11 i did something similar with steel building. Due to possible penetration from flying objects during storm events I put 3/4 plywood along the entire exterior of the house framing inside the metal building with 8in walls 12 centers. Added protection and security!
What a beautiful decision to up the security on your home! Love hearing people with similar builds or plans for it. You guys rock!
Holy crap. You can fit a lot of insulation in an 8 inch wall.
@@GeneralChangFromDanang You certainly can!
I wonder how much it would cost to add concrete to the exterior walls. Insulated Concrete Forms, ICF, uses styrofoam and gets filled with concrete. Probably expensive enough that limiting it to a storm shelter room would be needed.
@@FixItPleaseJ
ICF is cool technology. I don't know what the cost is, but you will also need heftier footers
Thank you for being very detailed on the costs. Finally a video that is not a bait and switch type.
So happy you enjoyed it! We have a google doc in the description with the blue prints, layouts and receipts if you need anymore information on the build. Feel free to reach out for any further information.
Thank you for the support!
How much and how big is the property the home sits on?
Your channel will definitely grow if you keep putting out content like this. This was outstanding and informative, the price breakdown is stellar and very beneficial to see and the video editing was good as well. Can’t wait to see what’s next..(I might just have to build a barndominium for myself, now).
Thank you so much! We have so many hours into our videos but this one especially. We hope to be able to make content as good as this if not better for years and years to come! Thank you for being apart of our journey
Thank you for this. My husband and I have a large family and we are planning on building a 5,850 sq ft barndo early next year that’s includes a 1,250 sqft shop space . We hoping to spend less than $600,000 which is our total budget. My brother-in-law is a contractor and is coming from out of state to help us. Hopefully we don’t lose our minds by the end of this.
That's a huge build! I wish y'all the best and you're fortunate to have a contractor in the family!
@@DudeWeCanBuildIt With 7 kids and my parents-in-law living with us. I can’t wait to get into a larger space. 😂 We outgrown our 2,000 sqft house. However, to get a larger house in this current housing market for under 650,000 in our area is like finding a needle in a haystack. Plus spec homes nowadays are cheaply made. Thankfully my brother-in-law is from Texas and has experience with Bardominiums.
Might be a good idea to start purchasing some materials now before inflation increases
@@alvindueck2104 Yeah, that’s our plan.
@bunnyblue9311 do a video of it
Very affordable and super nice. A 500-100 square foot condo where I live is easily 200k. Your place looks great! I think it's cool you spent extra on a couple things that mattered to you
Well thank you so much. It’s amazing what you can get for the price especially in today’s economy.
Thats what makes these things great! Strong, customizable and affordable. We appreciate the kind words!
New Subscriber ..... TOTALLY am IMPRESSED at how economically $$ you "sourced" your materials for this build .... I am a retired residential contractor in Massachusetts, and I KNOW the cost of building products in "my area" of the country .... (20 - 30% higher, here .... ) GREAT job !!!
And "Thank You" for posting this ....
Thank you for the thoughtful comment! I'm beyond happy that you enjoyed the build especially coming from someone that is in the trades.
Great story telling and editing. Very easy to follow and watch
Thank you so much! We greatly appreciate the kind words.
Great job. One item I noticed when you added the fiberglass insulation bats, I think you should have used non-faced. Using the faced insulation plus the spray foam gives you a vapor barrier on the inside and outside trapping moisture in the walls.
Hey, I have been watching RUclips for years. This is by far the best video I have ever seen in regard to content, knowledge, and just overall good information. Thanks
I appreciate the heartfelt comment! We have been making videos for 5 years and are always trying to get better!
19,000 Subscribers and "DUDE" got 1.5 MILLION VIEWS! Keep KILLING it 💪 metaphorically of course!!
Thanks!
Must be nice able to handle the most expensive part of the project yourself thanks to your company. You saved a hecking fortune.
It was a blessing for sure to be able to get it at cost.
@@DudeWeCanBuildIt Dam straight! Well done. ❤
No doubt, & this video & _ALL_ the "cost to build" videos can never (HAVE never) give you the actual cost if you had s/one do the work for you, as *99.99%* of those who wish to build would require. In o/words, there's no way to really find out what a build will end up costing. Great video & good information...don't get me wrong, but still many unknowns.
@@Kman. I had a general contractor price out the whole build, turnkey, for $160k.
@@DudeWeCanBuildIt aHA, *THAT'S* what I (and most others) was looking for. Now, just to follow up & confirm s/thing though...
That *$160* number would be parts/labor for _E V E R Y T H I N G_ shown in the video...JUST as the home is shown in the video, "move-in" ready?
Should we decide on one, I'll see if I can secure a plan that includes a materials list, so a builder knows EXACTLY what he's be working with to get a HARD #. *Thx!*
Add + $40,000 to the build cost if you're anti-social.
lol if you pay someone to build this for you you’re looking at $160k.
Or if all of your friends are useless idiots who couldn’t hold a paint brush if it was duct taped to their hand.
Lol, classic
@@DudeWeCanBuildIt that’s alll day 160 is light!!! My sis bout a prebuilt home for 190 . 160 is a steal . Idk if it can be done up here in New England I haven’t heard or seen but I have a feeling it can be done
@@WatUpOck Aside from permitting and snow load, I don't see it being much different.
They have stronger models of the metal building for increased wind and snow loads
Nicely done man. This is great content given the current market. There are so many of us looking for alternatives to the conventional unaffordable homes, and this is different than many other options I’ve seen. Great job
Thank you so much! The market for housing is criminal right now. Researched and found these types of homes and went for it. We already had a little experience in RUclips so thought people should know that these options are out there. Happy that translated through the video! Thank you again for watching and supporting
You sir just earned a subscriber. I am looking to build a barndominium this year in rural South Carolina on our family land. I am a software developer and the precision and thoroughness of your cost breakdown is something I only see in my profession. One of the best and straight to the point pricing breakdowns I've seen on RUclips. Excellent job!! Don't be surprised if I reach out to you for extra guidance lol.
Hell yea hmu too
That's great! I'm glad we could be a source of inspiration. Definitely reach out if you have questions!
I can appreciate good project expenses tracking, glad I'm not the only one who keeps track! Great video
You and me both!
From the plumbing and concrete pad to the finished product at that cost is pretty amazing.
I never thought of making one of those garages that is installed in one day into a house, lol ..a brilliant idea and probably half the cost of actually ruff framing a house of that size. All of your ruff framing andca complete structure in one day , cant beat that !
Thanks, it seemed like a great idea and I love the final product!
Thank you for taking the time to make this video, it’s very inspirational. I’m just beginning the journey to build something like this and I’m definitely taking some of your ideas.
Take all the ideas you can so you make the best decision for yourself! We appreciate you watching the videos and being along with us 😁
If you have any questions about anything please feel free to reach out!
Awesome! I’ve seen a huge increase in demand for this type of builds. 60% of the leads I get are people who want to get a Barndo shell. I just wish people would take the time to do some research and have a general idea of what they want. While our tubular steel frame buildings are a lot cheaper then red Iron, it is harder to customize and make the shell look like a regular house. But we got some great options. With our direct attach option, you can attach your plywood or Sheetrock directly to the building’s walls, saving you time.
That's cool!
I'm at the beginning of my journey to do this exact thing, so if you are driving in rural North Carolina and see this house's identical twin brother, it may or may not be me.
Phenomenal video. Loved everything about it.
You can do it!
This is so awesome!! What a good price! I love seeing how much each individual thing costs 😆
It really is! Thank you so much 😁
Remember, that’s his cost.. it’s not realistic when you don’t “know people in the trade”
@@1234ahhh1 The only things I saved on is the labor for the AC install and Electrical which comes out to 8K. That being said, a homeowner can do those trades themselves here in Louisiana. So, it actually doesn't change anything. Plus, if I had done the plumbing myself, it would save even more!
@@1234ahhh1 it’s “building a home for $87,000.” Not “I built a home for $87,000 and you so can YOU!” Let’s be real the general consensus of the video is you can get a lot more for a lot less than buying some new build for $400k with 12% apr for the next 45 years of your life.
Thank you for sharing your build with us. I really appreciate it. I am trying to escape being a rent slave and own my own property. Its so expensive trying to even find a property with a house on it as they all want too much regardless of how run down the house is. I think my only option is to find virgin land 30-40min outside the city and develop it myself. I have been looking at shipping container builds, manufactured homes, tiny homes, and ect. But a metal home seems like a happy medium between the affordable options. I like how easy it is to set up and build up. I think I can afford to get a loan to do most of the exterior work (utility connection, foundation, metal building purchase and setup). While I save up and use my own labor to build up the interior. All I need is the doors and windows installed. I can still live in the building while finishing the work. My mind is flowing. Thank you.
You're on the right track, own your home and get out of debt
Be careful with trying to get a loan from a bank to do this type of construction, you'll have to make sure to check your locations building codes and banks underwriting construction standards.
You said you were an AC contractor as I recall….Maybe do a few videos on that work as well. Maybe talk through design, layout, steps you take, how to size a system, costs for different types of systems, different brands and your thoughts about them, custom vs a standard installs, parts, etc. With your cost breakdowns, we understand it’s dependent on the part of the country you live in, availability of equipment and so on. But, if you do a video breakdown the way you did with the house, that would be great!
I actually have a video in this playlist of installing the AC in this house, you should check it out and let me know what you think!
How did the ply bead come out cheaper than drywall? Everywhere i look where i am at its way more expensive than drywall. You paid 29.78 per sheet and where i am the drywall is $10-$13 a sheet. Am i missing something ? Genuinely asking. I am in Denver.
When you factor in the tape, mud, and labor to finish the drywall, it's much more expensive.
You could do it yourself for cheap, if you want to. I didn't
This is the first time I’ve ever seen one of these videos where the owner checks their ego and hires out when they know they aren’t qualified to install/build something. You did absolutely everything right and this barndominium will last you a life time, well done👏👏
Thank you very much! I appreciate the well thought out comment!
This is awesome. Im a simple man and I definitely appreciate the options this build had to offer.
Glad you like it!
All I have to do is figure out where I can get the land and the electricity and the sewage system and come up with another 89,000
There ya go! You got it champ. Good talk
Go dude you can build it I'm a contractor too I just don't do sewage systems or well systems
Plus I don't have the land either
@@william7108 city water is cheaper
@@william7108 figure out where you want to live and how much land you can afford. Then go find it
Is that a money saving tip in the summary at the end? Install quartz counter tops but then tell everyone it's granite? (12:10)
Quartz and granite are similar in price, but mine are quarts.
@@DiscoFang what about butcher block tops? If sealed , are they any good? Much cheaper.
Where are you located? 12" deep for a footer is a money saver. No Frost line there?
Is the building code different because of the barndominum construction?
So it's a big slab- on- grade?
Great video. Great result. Thanks.
I like that you didn't traditionally sheetrock the interior. Everyone always assumes you MUST cover all your walls with sheetrock/mud, but it's labor intensive to install, it's fragile and it's difficult to repair. The battens look great and give some depth to the rooms, instead of a void cube that everyone loves for some reason. Good move!
Thanks! I also do not like sheetrock and was looking for alternatives!
Some local codes require sheet rock for fire rating behind a wood wall.
Excellent breakdown and explanation. Thank you for taking the time to record it.
Thank YOU for taking the time to watch and support! We genuinely appreciate it
That exact same build here in Miami would probably cost around $400k and that's if they allow you to build it because of the wind rating.
You can get these upgraded to 160 mph rating
Would you be able to purchase and bring home some stuff from a different state if it's cost savings enough when you're out on a road trip?
@@alvindueck2104 I don't see why not.
Nice work bro!
Thanks for watching!
I just finished a total rehab on a 1,600 sqft 175 year old house. Spent just over $50,000 above the purchase price, and it was $79,975 total cost, for everything. So, your price is right on point. Mine isn't in the middle of nowhere though, sadly. Trying to sell!
Oh, wow!
Old houses are fun and thorough projects!
It's cool to see the difference in lumber and other building materials from back then.
This sort of thing shows just how important it can be to be social and be open to learning new things. You saved probably 100k+ just by getting to know some people and learning how to do things yourself. Not to put a dollar value on good relationships, but when bad company costs so much it's hard not to appreciate how much good company is worth.
Same one in California is $250,000
Just the permits alone is $75,000
And that’s if the city, county and your neighborhood approves it
Yeah I love visiting cali but I’d never live there. You’d spend $87k a year to rent someone’s bedroom out
Where did you build this. I might have missed that part. I thinking of building one in northern AZ as a weekend getaway/ part time rental@@DudeWeCanBuildIt
California, Illinois, New York (most of the NE actually). Taxes and fees to death.
@@Moco925 South Louisiana!
@@sburns2421 Don’t know how people make it out there
How many years ago were these prices???
2 years ago
Can’t wait to see what y’all are building next!🎉
We are excited too!
Perfect video.
So for roofs, standing seam is recommended because the screw down metal ones have the issue that after a decade or so, the screws get loose, lose their waterproofness and begin leaking. Is that not an issue with the sidewalls, the way you have them built ?
For insulation, since it is so cheap, any reasons to not double the wool insulation for a higher R value ? Did you put the same insulation in the roof ?
Why did you go for a custom size for your interior doors (since you built the framing, why not build it at a standard size and save with a standard door) ?
I will build a house next year, this video is very helpful, thank you.
Standing seam is ideal and expensive. I will have to replace washers every 10 years or so. It is not an issue on vertical surfaces and I'm building a wrap around porch.
36" doors are what I wanted. I didn't calculate enough room for the door plus the doorjam and trim, so I had to downsize.
I enjoyed this simply because he gave prices.it gave us a true idea of what this costs without that mark up from crooks..thanks and it turned out great.would have enjoyed a final walk thru...
Thank you so much! The walk through is right under this video.
Nice build man, forgot to include cost of lot, septic, well. Also cost of permits to build. But 88k is definitely way better than 350k new homes being built rushed and bunch of mistakes!
Go check the pinned comment! I added it there. Wanted to focus on just the house in this video. We appreciate you watching!
How much extra would this build cost if you let a builder or contractor build everything?
Probably around $160k.
I did the general contracting and a lot of labor myself
This is a great, well put together video and I enjoyed watching it. Thanks for the inspiration!
What absolute kind words! Thank you so much. We genuinely appreciate you watching and supporting!
Great quality video. I bet you will have a lot more subs soon.
Thanks, we certainly hope so!
If you don't mind sharing, how much was the lot and utilities? Are you on public utilities or do you have well/septic, what about electric? Also how far away is your location from the closest city/suburb for access to services/amenities like groceries, stores, businesses, etc. I'm curious, because I want to do the same thing. It's hard to find a lot for a decent price that is anywhere near civilization. Low price lots are often super rural, and don't have access to water/sewer/gas/electric/internet/etc. In some cases it might take nearly that whole 80k budget just to get utilities ran to the property. Going off grid wouldn't be any cheaper.
I can tell you what it cost me, but depending on where you're at, the prices can vary A LOT!
Water meter $1800
Sewer system $3500
Electricity $4000
My house is 600' off the road. I buried the electrical conduit and water lines myself.
I have 27 acres that was purchased for $215k.
It's a 10 minute drive to Walmart in the nearest town.
@@DudeWeCanBuildIt wow, most places I've looked for properties, anything even close to 27 acres would be like 1 hr or more just to a grocery store, or it would be millions of dollars.
@@00HiGhGuY00 What state do you live in? These prices are pretty common around here
@@DudeWeCanBuildIt I wasn't looking in the state i currently live in. I have looked primarily in Texas, Virginia, and Washington
Being next to a sizable body of water I understand going with a pad foundation,
Other than that, I prefer having a full foundation/basement.
But that's just my own personal preference.. basements are an awesome thing to have for many reasons.. if they won't be problematic.
We don’t have that option in Louisiana. 5ft up no matter what. No basements in site lol Would have loved to do something like that!
@@DudeWeCanBuildIt that's too bad, but looking at it from a reality perspective it makes sense being in Louisiana.
Basements in Louisiana, Miss or Alabama are rare. There are some in the Northern parts of these states; sometimes more of a half basement where the home is on a hill and the basement floor is an ground level for the back yard.
Great breakdown!! Your house looks great!!
Thank you!!
Best Barndominium Breakdown on RUclips! Thank you.
You're welcome! Glad you enjoyed the video!
It would be great if there was a video on the permit process and how each step was permitted and completed. I looked at the permit applications for the township I am interested in, and it seems the township assumes there will be one builder for the whole build. I could be missing something, since I am not familiar with the process.
The permiting process is different depending on where you live, so no one instructional video would be applicable for everyone. Where I'm at, I just told them I am building it myself and I did not need a general contractor.
More than the building itself, most people can't get into the LAND; If you bought 10 acres where i'm from , it would almost be 1.2m.. Wells are a 14 month wait, and $60k.
I spent $215 for 27 acres and I'm on city water.
I loved this! Did you film making the pond? New subscriber! Blessings from Kansas
We did film it!
It's not currently posted, but we will definitely work on it
@@DudeWeCanBuildIt my dream is to purchase some property and for my husband to have a pond that he can go hang out and maybe stop it with fish. Love your channel!
That's awesome, he would love that!
I need to get my pond surveyed and stocked.
Excellent video! very well explained. Thank you!
No thank YOU for watching and supporting! We are beyond appreciative for any type of support
About the in the slab plumbing, is it ever done to frame around the pipes so the pipes can be accessed (no concrete on top of the pipes) later? So you have the pvc pipes in framed slots, pour the slab around that, then you'd put the flooring on top of that so it's not seen. That way if some pipe work needs done, you just lift some flooring instead of flooring and ripping up concrete. Maybe the pipes could be set up to be along the walls so you'd not even be stepping on the flooring over that
I've never seen it set up like that and I don't have the expertise to advise on it. You could consult a plumber about that
It turned out great! Nice work. I like the idea of using the metal structure for a quick dried in start to the interior.
Thank you so much for the kind words
Good video but is it not missing a lot? Mirrors, dishwasher, bathroom counters, permits, utility hookups, all come to mind
This is the price breakdown for the house only.
Utilities and permits vary A LOT depending on your municipality. I can include those prices, but it would be misleading for anyone that doesn't live in the same area as me.
The bathroom counters and sinks are included in the countertop price of this video. I guess I should have elaborated a bit more there.
The dishwasher was $400. I didn't include the appliances because you can spend as much or as little as you want depending on taste.
I talked about the mirror in the walkthrough video. It's something I had laying around, so it didn't cost anything.
@@DudeWeCanBuildIt Nice thanks for the reply
What about septic?
We left the dirt work and septic stuff out thinking it wasn’t relevant to the actual build but everyone seems to want to know. We will put it in the comments soon and I’ll tag you in. Sorry about that
Septic prices are depending on your county.. I paid for mine $9300 concrete tank, bed installation and county permits/inspection in South San Antonio tx.. but the mobile homes sales office I got info from quoted us $15,000.
It would have been cheaper if you went two story. A 30x30 is alot less than a 30x50 building and alot less concrete. I have been planning mine for a couple of years and am breaking ground this fall.
The wind rating is the same
My home is going to be a single slope roof. It will be 24x60 ( 24x24 garage and 2300+ sq ft living).
Oh wow I didn’t know that! Please grab our email if you can send us update pictures if you can remember. A two story version would be so cool to see. Beyond happy for you. We know the feeling of starting all to well. The finishing is even more satisfying! Enjoy
You are right in line with what I am planning, 24x60 with 2 story living quarters. Are you working with an existing design or are you designing it? I've had a hard time finding examples that are close to that idea. Thanks.
@@Behine.DeChilis my restrictions is + 1700 living area. So 1700 ÷24 = 70. So 2 story would be 24'x35'. I would like my 3 main rooms to be at least 12' so 3x12 = 36. 24'×36' slab (1728 sq ft) would do . This doesnt take in account the garage and storage.
@@Behine.DeChilis I have drawn my basic plans.
@@TheWarriorsMind That is very close to what I'm aiming for.
I like your video editing I like that it’s under 15mins. And I like the price break down throughout the video. Subscribed
We like that you just named off everything you liked and we appreciate you liking our stuff! Thank you so much for watching and subscribing.
We have a video coming Friday with a little minute skit in the beginning! Hope you enjoy 😁
This is a fantastic video! I'm looking into making a 20x30x16 barndo, with 2 stories. Thankfully i don't need my interior to look so nice so I'll save some money there. Best part for me was watching the insulation, I'm planning on also using closed cell plus fiberglass, though i might only go for 1 inch of spray
That's awesome! You can build it!
Every environment has different temperature/humidity concerns. Talk with an insulation professional and do some Reddit research to make sure that won't become a source of condensation and eventually mold in your area
for anyone wondering, plumbing isn't really complicated or difficult. only thing you need to remember is "shit flows downhill" just keep a 1/4 inch per ft slope and have a vent stack. that's really it
It really is simple!
A lot of people overcomplicate it
the design on the inside isnt very nice, but its awesome how you were able to build this yourself with some alternative techniques
The beautiful thing about these builds is you can make it look however you’d like on the inside. Super customizable.
We appreciate the comment!
Nice build!
Thank you!
Dude he built it!
Yes we did! Thank you for supporting 😁
Love that I found this channel .. literally about to start my process on my birthday.❤🎉
Congratulations!
And happy early birthday!
Any chance i could get blueprints or plans for a house like this?
It’s linked in the description. Blueprints and receipts
Great video! Custom cabinet maker here… Those are not “custom” cabinets. You may have a few custom sized cabinets, but those are very basic. For the linear foot of cabinetry you had, most custom cabinet shops would run you over 20k. Sounds and looks like yours came from a production shop. And that’s a great value choice! But I wouldn’t call them custom.. people will be quite surprised when they contact an ACTUAL custom cabinet shop and the quote comes back as double or more of the price of your cabinets.
Great information!
As someone who has put kitchens together with store-bought cabinets, this definitely seems custom fitted to me LOL.
I definitely see what you mean, there are no recessed into the wall cabinets or anything specialized about my cabinets.
Omg! I built my house and drywall finishing made me hate life. If I had known about the exterior drywall I could have saved 6 months.
Thanks for a brilliant idea. I'm about to start the mother in law pad and I'm definitely going to do the exterior drywall installed vertically with batten strips. Such a time saver
It worked great!
If you like the look, it saves a ton of time!
@@jl9678 yeah but than it looks like you live in a trailer house
Look up interior board and batten. Apparently it's currently in Vogue
@@jl9678 That's wild!
Retro styles always come back!
Love it!!!!
We love YOU!
I would the have put a brick ledge on the foundation just in case I wanted to, in the future, add masonry work or any other exterior additions.
Also if you live in the Southern Tornado Alley like I do, either incorporate into the layout a small steel container (like a storage pod size), or use steel reinforced concrete to make
one of the closets so you have a storm shelter and safe room.
Those are great ideas!
Great work and material choices
Thank you so much for watching and commenting! Means the world 💗
How do you have all these friends who actually help out and don't just play videogames all evening and night?
I’ve helped them out and they help me out 🤷🏽♂️ People helping people
4:40 “conditionling”🤣
Lmao we had to leave it in! Knew someone would notice eventually 😂
Active listening unlocked 😂😂😂
Barndominium - $87,000.
Plastic, head-sized bowl - $4.99.
Free self-haircuts for life - Priceless.
Thanks!
loved the video! We're on the more serious side of building one of these but our issue is we live in northern PA and have to deal with winter while we build so our option is to build a large 40x80 building and get the shell and floor in and park our 5th wheel in the building while we finish everything but trying to find a contractor around here is all but impossible, they either dont call back or they give you the " I really dont want to price".
That's great, I'm glad y'all are building!
That's wild about the contractors though. It's the opposite down here.
How much did the property cost? The well? The entire septic tank and leach field system? The dirt and compaction under the house?
The property is 27 acres that cost $215k
I'm on city water.
The sewer system was $3,500
The dirt came from the pond.
Why go through the hassle of building it yourself, only to cut corners and make it look like a double wide trailer inside...?!
This is what I like. You could do it how YOU like. Thats what's cool about these builds.
I do not belive that wind rating for one second
It’s engineer stamped 🤷🏽♂️ We can post a link to the plans. And that’s just the wind rating for the building. Not including the spray foam and framing on the inside. We are in hurricane valley we can’t afford to lie on a wind rating nore build something that couldn’t sustain those winds.
Only way we can prove it is once a hurricane comes through we can post update pictures 😂
@@DudeWeCanBuildIt I think the spray foam will definitely help. Hope you never have to find out though
We have a hurricane on the way. Will keep you updated
Shits crazy all I need is 500 more feet. 2000 sq ft & I’m good . I Promise!!! New Construction though
And it’ll still be cheaper than anything else you can find! You make go as big or as small with these as you want.
@@DudeWeCanBuildIt I’m up in Mass NY CT AREA (New England) . I’m trying to get situated with a long term work project for my union then I’m ready to go fr bro because with these banks 🏦 need work history to get a loan.
wow that is a nice build man. the prices are so reasonable...
is my area spray foam was qouted 20K for half 2 small beds kitchen and living room.
your work is inspiring man!
Thank you!
I have been shocked by what other people around the country pay! Very blessed to be in Louisiana
@@DudeWeCanBuildIt its totally out of hand. I "ranch" style fixer upper will sale for over 1M! I am not even in a city....
@@devachapman6315 that's insane!
1 door in Canada is 1200$. You would never build it for that price in Canada. Foundation alone is 20,000$
My goodness! I’ve heard everything is pricy up there
@@DudeWeCanBuildIt Oh yeah, I'm converting a 14x40 barn to a tiny home and already spend 70,000$ and I still don't have my well, and the cabin is not completed as well as scam contractors. That doesn't count permits.
Move
@scottloftin1730 Barely making it work, my well for water is running me 35000$. My homestead is tiny compared to your build, just the land was 150,000, but most land is 350000$ and up, with no development on it.
@@heknows5418 There's no place to go, I'm in unorganized township, my taxes are 800/year, anywhere else is 6,500/year. I'm retired, I can't afford anything else, just running hydro was 21000$
8:20 - not having smooth walls makes that wall look like the walls in the cheapest mobile homes.
It does!
Good thing I like how it looks. If you were to build it, you could float the sheetrock for a smooth finish.
It cost YOU $88,000 anybody else maybe $150,000. At least you acknowledged how you saved money. I say Legit, minus the ⛲ pond though.
Absolutly. We think the same, maybe around $160k for someone else to build. Not including permits and other things. Permits vary town to town, state to state.
And not a fan of the pond?
Thank you for watching! We genuinely appreciate it
Great video. Nice breakdown and loved how you mentioned where the extra savings came into play.
Thank you so much for watching and enjoying!
im currently doing the same with a 30x50 in Clinton, Louisiana. Just got concrete done and waiting for builders to install the building.
Love to hear and super happy for you! Keep us updated
You don’t say WHERE you’re building- I HATE Building Inspectors from 40 years as a GENERAL CONTRACTOR…. Can’t get a Building Permit in less than a year!!! Never mind wanting to build a steel structure. No wonder CA is in the dumper!!
Louisiana
it kind of bugs me that the title says 87 but the total was 88.
That’s fair
forreal lmao
Sounds affordable.
It def is!
I have property that I'm going to build rentals on and what you did here looks to be an excellent option. I really like the low maintenance a building like this has. Video was very well done.
Thank you for the kind words!
I have some rentals also, and this has been a consideration. I have several mobile home rentals that are constantly needing attention. Keeping maintenance and operational costs down is a big deal with rentals.
So add another 50-60k. To pay someone to install everything!
Pretty much! Would honestly cost around $160 to have it built for you
Let’s go!
🤌🏼
builds a barndominium and has no garage for cars.....what was the whole point of this.
How many homes have you built?
To have a house that costs a fraction of a $300k cookie cutter home. Imagine the garage I can build with the other $200k.
#bigthink
Just this one
Didn't build a barndominium. A barndominium has a drive thru section tall enough to park a 5th wheel triple slide out camper or a bigass motor home inside of it.
@@gus24seven lol, that's a barndoMAXium!