HumbleGreetings Thanks for watching. We hope the video helped! If you’re referring to the plastic inserts installed between screws...this is your “Soft Closing” engineered mechanism. It’s this small mechanism that creates the tension for the door to rest on. As the weight of the door rests itself on the plastic tab, the soft closing mechanism closes the door at a very slow / soft rate. Hope this helps! Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
I bought two Pax wardrobe with such hinges. After two weeks of using all of these "soft close" amortizators were broken, there was even some liquid leaks out of them. For now all doors close with noise. Is there any alternatives from another brand like Blum or Hettich or anything else to replace it?
Thanks for watching & sharing your experience. That’s no fun. It’s possible that you can visit your local hardware stores & try to match the hinge for replacement. You can also return to ikea for new ones...& we are certain they would replace them free of charge since they failed so soon...😳
Him Ritethere Thanks for watching & sharing your question. These are very nice hinges & very friendly to install, you’ll like them. This is Part 1. Below is a link to our Part 2 video showing the installation process of the hinge bases that are secured to the actual Storage Unit, definitely check it out. ruclips.net/video/kAehjvAhbmU/видео.html Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
These, along with most Ikea screws, are Pozidriv screws, not Phillips. Using a Pozidriv bit (PZ#2) instead of a Phillips bit will prevent stripping the heads.
Bricago Thanks for watching & sharing your comment. That’s awesome! We appreciate it. We are very happy with these storage units. Below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on ikea units & more. Definitely check those out. ruclips.net/p/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for watching & welcome to the DIY Raptor Club. We haven’t tried that before. You may loose a bit of the efficiency of door opening & closing. Keep us posted on how it works if you proceed. 😎👍
Yolandi Thanks for watching & sharing your question. Most ikea hinges are universal which is great. We definitely recommend checking with an ikea specialist at an actual ikea just to be sure. Keep us posted! Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
You might now use BESTA not UTRUSTA. A BESTA hinge is a HJALPA hinge , but with the push to open catchers also included in the package. Utrusta limits the opening angle to various degrees, and it says for use at/near refridgerator , as an example, suggesting it inately swings out wider. ( I think it clears the door next to it better.)
Laura Bartlett Thanks for watching & sharing your comment Laura. Below are links to Steps 2 & 3. ruclips.net/video/kAehjvAhbmU/видео.html ruclips.net/video/fhBgoFOpSpM/видео.html Thanks again for watching & we hope the videos helped! 😎👍🔧🔩
Laura Bartlett Also, below are links to ( How to remove door from hinges & How to install Door Handles ) ruclips.net/video/snnR_WQDNys/видео.html ruclips.net/video/snnR_WQDNys/видео.html 😎👍🔧🔩
Chris Clarke Thanks for sharing your comment Chris. Not sure why you’re not able to see the links however we will add them again. Keep us posted & we hope this helps! ruclips.net/video/snnR_WQDNys/видео.html ruclips.net/video/snnR_WQDNys/видео.html 😎👍🔧🔩
Hi, I cannot find the video where you actually install the door with the hinges on onto the connections on the storage unit.I have all 8 pieces screwed on but have trouble to fit the hinges onto the connections
Thanks for watching, we have attached video links below. ruclips.net/video/kAehjvAhbmU/видео.html ruclips.net/video/fhBgoFOpSpM/видео.html ruclips.net/video/snnR_WQDNys/видео.html ruclips.net/video/LRJ2jDE7fUQ/видео.html Hope this helps. 😎👍
Can anyone tell me which screws are used on these hinges? Got some secondhand doors/hinges without screws. Tried asking Ikea but they hung up on me ^^;
Jacqueline Marcus Thanks for watching. These are just standard flat tip screws & can be purchased at your local hardware store. We recommend taking the hinge with you as well as the depth measurement of Door so they can sell you the right screws. Keep us posted. Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for watching & we appreciate you reaching out to us. What’s your update? The screws that are installed on the actual hinge are adjustment screws. These screws will stop turning once the adjustment setting has reached its full length. Please keep us posted on your project. 😎👍🔧🔩
Leo Ehrlich Thanks for watching & we appreciate you reaching out to us. What exactly are you experiencing? Keep us posted! We really enjoy making these helpful videos for our fellow DIY’ers. 😀 Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Sharon Cozad Thanks for watching & sharing your experience. Let’s get this figured out! Below is a link to a video that you may find very helpful. Definitely check it out & let us know if this helps! ruclips.net/video/fhBgoFOpSpM/видео.html 😎👍🔧🔩
Sharon Cozad Also, attached is a link to our video showing the removal process of the hinges. Hopefully you’ll find this helpful & beneficial along the way! ruclips.net/video/XYzxJ4INjOQ/видео.html
Thanks for watching & welcome to the DIY Raptor Club. You may have to reinstall the hinges & have the weight of the door help you reposition latch. Keep us posted. 😎👍🔧🔩
Steven Holt Thanks for watching & we appreciate you reaching out to us. Sorry to hear about the inconvenience. We really enjoy making these helpful videos for our fellow DIY’ers. 😀 Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
The screws are PZ2 (pozidrive) and not PH2 (philips). It is VERY important to use the correct screwdriver in order not to damage the screws and the screwdriver.
Thanks for watching & welcome to the DIY Raptor Club. We are here to help. Below is a link to a video that may help. ruclips.net/video/kAehjvAhbmU/видео.html Please keep us posted on your project Joey. Us fellow DIY’ers need to stick together! Hope all is well with you and your family. 😎👍🔧🔩
Thanks for watching & that’s a good thing...3rd grade tends to be the hardest of them all. 😁👍 Any & all helpful info is greatly appreciated. Hope all is well with you and your family. 😎👍
Thanks, very useful. Do you know how big the ikea faktum holes are for their hinges. 35mm? Thank you.
Do you know what the little plastic inserts are called that are put into the screw openings before the hinges go on?
HumbleGreetings
Thanks for watching. We hope the video helped! If you’re referring to the plastic inserts installed between screws...this is your “Soft Closing” engineered mechanism.
It’s this small mechanism that creates the tension for the door to rest on. As the weight of the door rests itself on the plastic tab, the soft closing mechanism closes the door at a very slow / soft rate.
Hope this helps! Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Hi - are those custom doors? If yes where is the correct placement of the bore ?
I bought two Pax wardrobe with such hinges. After two weeks of using all of these "soft close" amortizators were broken, there was even some liquid leaks out of them. For now all doors close with noise. Is there any alternatives from another brand like Blum or Hettich or anything else to replace it?
Thanks for watching & sharing your experience. That’s no fun. It’s possible that you can visit your local hardware stores & try to match the hinge for replacement.
You can also return to ikea for new ones...& we are certain they would replace them free of charge since they failed so soon...😳
Can you adjust these hinges so that there’s not a gap between cabinet and the doors, where the hinges are?
Him Ritethere
Thanks for watching & sharing your question. These are very nice hinges & very friendly to install, you’ll like them.
This is Part 1. Below is a link to our Part 2 video showing the installation process of the hinge bases that are secured to the actual Storage Unit, definitely check it out.
ruclips.net/video/kAehjvAhbmU/видео.html
Let us know if you have any questions, we are here to help!
Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
These, along with most Ikea screws, are Pozidriv screws, not Phillips. Using a Pozidriv bit (PZ#2) instead of a Phillips bit will prevent stripping the heads.
Bricago
Thanks for watching & sharing your comment. That’s awesome! We appreciate it. We are very happy with these storage units.
Below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on ikea units & more. Definitely check those out.
ruclips.net/p/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii
Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thank you I thought I was losing my mind.
Do both middle hinges need to be used? One is interfering with a drawer. Can I use 3 hinges (top, middle and bottom only)?
Thanks for watching & welcome to the DIY Raptor Club. We haven’t tried that before. You may loose a bit of the efficiency of door opening & closing.
Keep us posted on how it works if you proceed. 😎👍
Can you change them to Ikea UTRUSTA, for push to open or soft close?
Yolandi
Thanks for watching & sharing your question. Most ikea hinges are universal which is great. We definitely recommend checking with an ikea specialist at an actual ikea just to be sure.
Keep us posted!
Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
You might now use BESTA not UTRUSTA. A BESTA hinge is a HJALPA hinge , but with the push to open catchers also included in the package. Utrusta limits the opening angle to various degrees, and it says for use at/near refridgerator , as an example, suggesting it inately swings out wider. ( I think it clears the door next to it better.)
Please put a link in your description to parts 2 and 3.
Laura Bartlett
Thanks for watching & sharing your comment Laura. Below are links to Steps 2 & 3.
ruclips.net/video/kAehjvAhbmU/видео.html
ruclips.net/video/fhBgoFOpSpM/видео.html
Thanks again for watching & we hope the videos helped! 😎👍🔧🔩
Laura Bartlett
Also, below are links to ( How to remove door from hinges & How to install Door Handles )
ruclips.net/video/snnR_WQDNys/видео.html
ruclips.net/video/snnR_WQDNys/видео.html
😎👍🔧🔩
I still don't see the link. Am I missing something?
Chris Clarke
Thanks for sharing your comment Chris. Not sure why you’re not able to see the links however we will add them again. Keep us posted & we hope this helps!
ruclips.net/video/snnR_WQDNys/видео.html
ruclips.net/video/snnR_WQDNys/видео.html
😎👍🔧🔩
ruclips.net/video/fhBgoFOpSpM/видео.html
Hi, I cannot find the video where you actually install the door with the hinges on onto the connections on the storage unit.I have all 8 pieces screwed on but have trouble to fit the hinges onto the connections
Thanks for watching, we have attached video links below.
ruclips.net/video/kAehjvAhbmU/видео.html
ruclips.net/video/fhBgoFOpSpM/видео.html
ruclips.net/video/snnR_WQDNys/видео.html
ruclips.net/video/LRJ2jDE7fUQ/видео.html
Hope this helps. 😎👍
Can anyone tell me which screws are used on these hinges? Got some secondhand doors/hinges without screws. Tried asking Ikea but they hung up on me ^^;
Jacqueline Marcus
Thanks for watching. These are just standard flat tip screws & can be purchased at your local hardware store.
We recommend taking the hinge with you as well as the depth measurement of Door so they can sell you the right screws.
Keep us posted. Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
@@DIYwithMichaelBorders thank you. Do you know which length I need? Sorry
Jacqueline Marcus
Thanks for the reply, if we remember correctly, you may find 1/4” screws to work great. Keep us posted.
😎👍🔧🔩
Super helpful - you helped me fix my hemnes!!!
We appreciate that & we appreciate you sharing this. Let us know if you have any questions. Enjoy your night.
😎👍🔧🔩
Is buying ikea hinges a must ? Can use my own
Thanks for watching & great question. You can indeed. Keep us posted on what kind/brand hinges you go with.
😎👍🔧🔩
The screws that go in the holes of the closet wont spin at all
Thanks for watching & we appreciate you reaching out to us. What’s your update? The screws that are installed on the actual hinge are adjustment screws. These screws will stop turning once the adjustment setting has reached its full length.
Please keep us posted on your project.
😎👍🔧🔩
How do you open the doors when they are all closed?
Leo Ehrlich
Thanks for watching & we appreciate you reaching out to us. What exactly are you experiencing? Keep us posted!
We really enjoy making these helpful videos for our fellow DIY’ers. 😀
Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
If you don't want door handles you can get a "push opener" that you attach to the side of the cabinet/carcass, Ikea do some named
UTRUSTA.
Nick C
Thanks for watching & sharing your thoughts, that’s awesome!
😎👍🔧🔩
lifesaver
Thanks for watching Rebecca. We appreciate it, enjoy your day.
😎👍🔧🔩
I cannot get the door hinge to attach to the base insert
Sharon Cozad
Thanks for watching & sharing your experience. Let’s get this figured out!
Below is a link to a video that you may find very helpful. Definitely check it out & let us know if this helps!
ruclips.net/video/fhBgoFOpSpM/видео.html
😎👍🔧🔩
Sharon Cozad
Also, attached is a link to our video showing the removal process of the hinges. Hopefully you’ll find this helpful & beneficial along the way!
ruclips.net/video/XYzxJ4INjOQ/видео.html
How to attach door is missing.
Thanks for watching. 😎👍🔧🔩
Help I accidentally pull the hinges and the plastic thingy moved and the hinges stuck I can't make it longer
I need an answer ASAP
Thanks for watching & welcome to the DIY Raptor Club. You may have to reinstall the hinges & have the weight of the door help you reposition latch. Keep us posted.
😎👍🔧🔩
@@DIYwithMichaelBorders thx you so much it worked 💖💖
@@Syafiqizy
Awesome Awesome & we appreciate the update. Enjoy your day.
😎👍🔧🔩
I hate these damn hinges. Took me a while to figure them out when they came with my sideboard.
Steven Holt
Thanks for watching & we appreciate you reaching out to us. Sorry to hear about the inconvenience. We really enjoy making these helpful videos for our fellow DIY’ers. 😀
Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
The screws are PZ2 (pozidrive) and not PH2 (philips). It is VERY important to use the correct screwdriver in order not to damage the screws and the screwdriver.
Thanks for watching & sharing your this. Hope all is well. 😎👍
Well that’s half of the install , need to finish the rest .
Part 2:
ruclips.net/video/kAehjvAhbmU/видео.html
So you don't show which orientation to install the other part and how to connect them. You only showed the most obvious install. Dislike!
Thanks for watching & welcome to the DIY Raptor Club. We are here to help. Below is a link to a video that may help.
ruclips.net/video/kAehjvAhbmU/видео.html
Please keep us posted on your project Joey. Us fellow DIY’ers need to stick together! Hope all is well with you and your family.
😎👍🔧🔩
Part 1: ruclips.net/video/doNopy-XKTM/видео.html
Part 2: ruclips.net/video/kAehjvAhbmU/видео.html
Part 3: ruclips.net/video/fhBgoFOpSpM/видео.html
You don't need to show us how to screw 6 hinges. We get the picture after the first one. I passed third grade you know.
Thanks for watching & that’s a good thing...3rd grade tends to be the hardest of them all. 😁👍
Any & all helpful info is greatly appreciated. Hope all is well with you and your family.
😎👍
Marivalda cantora
Thanks for watching, hope all is well.
😎👍
It
Thanks for watching Justina.
À
Good morning, thanks for watching.
😎👍🔧🔩
Useless