How to install a Classicbond EPDM flat Roof
HTML-код
- Опубликовано: 22 фев 2015
- ClassicBond® EPDM Is the original EPDM roofing system with a proven track record of over 50 years service life. Recognised as one of the most reliable, durable and sustainable materials for your flat roof. ClassicBond is manufactured by Carlisle-Syntec who pioneered EPDM roofing systems in the 1960’s
BBA Certified & preferred by roofing professionals, ClassicBond is tangibly more pliable, slate grey in colour and is the ideal EPDM rubber roof covering for both large and small flat roofs.
➢www.rubber4roofs.co.uk/
➢ / rubber4roofs
➢ / rubber4roofs
➢ / rubber4roofs
➢024 7666 7234
IMPORTANT NOTICE
No responsibility or liability is accepted for the information provided in this video. You are responsible for your own health and safety. Activity with our products whether at ground level or at height is entirely at your risk. If you are an employer you must protect your workers and others from getting hurt or ill through work.
I have been doing flat roofs for 35 years and there's not many roofs that are completely flat and free from upstands, with no roof penetrations, stripped loads of them up, especially balconies, you can't walk on it, leave flat roofs to the professionals
NO adheisive applied to rubber material ? I've done MILES of EPDM...always glue on BOTH surfaces. EDGE glue on BOTH, is what you use on flashing and LAPS too ?
all looks so easy when the roof is on the floor lol
so what about roofs that have a pre existing roof will that have to be removed and this placed over it?
Hi. What thickness osb boards would you recommend on a flat garge roof that's approx 8mtrs square??
Shouldn't they wear gloves, mask, eye protection? Just wondering because I heard Talc is a carcinogen...or it's poisonous somehow.
Can the adhesive be used over roofing paint.... And is the product good in hot locations, we live in Spain....
My Garage roof, is a typical, old 1960's asphalt coated one, that is layed below raised side edges. I take it that a new roof, like the type shown here, would have to be placed on top of the old one ? and not down below, on top of and stuck to, the original one??
Backerboard ?
Try doing that in the wind on a roof 2 storey up
think you should have a video on how to repair leaks.12 months and i had water
Which side of white edpm rubber roofing is glue applied?
And cost would be for square metre ?
total crap