This looks so good now! Nice rims and sweet tires! Good ride height, good track width, the shocks are performing nicely. My only suggestion: cut some of the foams away so the tires can flex and conform a little more. I wouldn't wait for them to break in because it will take forever. But you can get an instant climbing performance boost by "airing down" and letting those tires compress a little more. ;) You'd be surprised at what it does.
I definitely should try the method by our did on tour guide video!! Either that or venting the tires cause I didn't.The truck performs much better with this set up, although I can't justify it in the video due to moist ground.I need to address a better pan hard set up though, cause I have a slight bump steer. Thanks for the great tip Mark!!!
@@ScaleCustomCrawlers-SCC I recommend not venting the wheels or the tires, but that's just me. I really like the look on camera of a well sealed beadlock wheel when the tires compress, they act like real tires holding pressure. But the key is for the to be able to displace it within the tire. That's why I've been cutting the foams on the TF2 truck tires. It allows for that air to displace but doesn't allow the tire to fully collapse because they have half the foam still inside. But they can still mold and conform over objects. It's not a perfect concept but I feel like it's as close to the real thing as you can get if you get it just right.
I hope you will enjoy it,this being my first 1/10 crawler back,impressed me,especially for the price they were couple of years ago. One point,it has a panhard and a 4 link at front,which is redundant,i pulled one link off to make it a real panhard+3 link at front(on a rgt always)
@@ScaleCustomCrawlers-SCC I like the idea I can make it what ever I want but ya hopefully this will be my new decent rig once I’m done with it. I got my rc stuff stolen starting fresh. But ya man thank u ☺️
Brother! You are gonna make me get my RGT 1/10 out and run it. Thanks! What shocks did you go with and do you like them? Rig is looking nice!! Great video my friend!
You definitely should get it out and run it Dirk!! I'll send you the link later on pm, I think the exact place I bought them dont sell them anymore but same product can be found on aliexpress too, they are oil filled 90mm. I'll check with you later on my friend. Thanks again!!!
Έκλεψα τα ζαντολαστιχα από το axial kit που έχω να φτιάξω, δεν άντεξα, ήθελα να δω πως θα είναι το rgt με χαμηλό κέντρο βάρους σε συνδυασμό με χαμηλότερες αναρτήσεις.Ειμαι αρκετά ικανοποιημένος αλλά όπως φαίνεται θαν πρέπει να βρω νέες ζάντες και λάστιχα για το Κιτ 😂. Ευχαριστώ αδερφέ για το σχόλιο!!!
Hello Codey, I am still using the stock electronics after all these years. My first upgrades were tires and suspension for this truck. I hope you will enjoy your new toy!
Yeap you are correct, and I love them already!! Lower than the previous, these are 90mm, combined with the heavier rims, the truck performs much better I could say.
Hello my friend,these tires were bought from banggood,but you can find them also on aliexpress , they are not very soft so they are nice for trailing but not for intense rock crawling . Here is the link www.banggood.com/4Pcs-RC-Car-114mm-Tires-for-110-RC-Crawler-4WD-SCX10-CC01-Wheels-RC-Car-Parts-p-1272058.html?rmmds=myorder&cur_warehouse=CN
This looks so good now! Nice rims and sweet tires! Good ride height, good track width, the shocks are performing nicely. My only suggestion: cut some of the foams away so the tires can flex and conform a little more. I wouldn't wait for them to break in because it will take forever. But you can get an instant climbing performance boost by "airing down" and letting those tires compress a little more. ;) You'd be surprised at what it does.
I definitely should try the method by our did on tour guide video!! Either that or venting the tires cause I didn't.The truck performs much better with this set up, although I can't justify it in the video due to moist ground.I need to address a better pan hard set up though, cause I have a slight bump steer. Thanks for the great tip Mark!!!
@@ScaleCustomCrawlers-SCC I recommend not venting the wheels or the tires, but that's just me. I really like the look on camera of a well sealed beadlock wheel when the tires compress, they act like real tires holding pressure. But the key is for the to be able to displace it within the tire. That's why I've been cutting the foams on the TF2 truck tires. It allows for that air to displace but doesn't allow the tire to fully collapse because they have half the foam still inside. But they can still mold and conform over objects. It's not a perfect concept but I feel like it's as close to the real thing as you can get if you get it just right.
Sweet shocks and tires do make a difference
I am planning a total change of this truck, right now I am waiting a Toyota hilux body for it. Thanks Henry!
I got one under my Xmas 🎄... I can't wait till I get to go out trailing with it...
I hope you will enjoy it,this being my first 1/10 crawler back,impressed me,especially for the price they were couple of years ago. One point,it has a panhard and a 4 link at front,which is redundant,i pulled one link off to make it a real panhard+3 link at front(on a rgt always)
@@ScaleCustomCrawlers-SCC I like the idea I can make it what ever I want but ya hopefully this will be my new decent rig once I’m done with it. I got my rc stuff stolen starting fresh. But ya man thank u ☺️
Absolutely love those wheels and tires!
Thank you bro!!shocks+heavier rims did the trick and the truck performs much better now.
Awesome RC Truck, very cool Mods And Up-grades!!! Congrats
Thank you pandacrawler! 🙏
You are Welcome my Friend 🐼👍🏻
Hello.. I'm new to you channel and Like what im seeing. .Beautiful RGT!
Thank you Jason!!!I hope you enjoy the content I make. Thank you for watching and commenting!
The RGT looks pretty planted now with lower height!Great video and camera angles!
It does,and it feels/drives better with those oil filled shocks.WIth the previous 100mm shocks the truck felt too loose.
Thank you!
Brother! You are gonna make me get my RGT 1/10 out and run it. Thanks! What shocks did you go with and do you like them? Rig is looking nice!! Great video my friend!
You definitely should get it out and run it Dirk!! I'll send you the link later on pm, I think the exact place I bought them dont sell them anymore but same product can be found on aliexpress too, they are oil filled 90mm. I'll check with you later on my friend. Thanks again!!!
@@ScaleCustomCrawlers-SCC Thanks brother. I was just wondering because I might replace my shocks!
Πολύ ωραίο το upgrade έγινε super το RGT! Πολύ ωραίο video για ακόμα μια φορά!
Έκλεψα τα ζαντολαστιχα από το axial kit που έχω να φτιάξω, δεν άντεξα, ήθελα να δω πως θα είναι το rgt με χαμηλό κέντρο βάρους σε συνδυασμό με χαμηλότερες αναρτήσεις.Ειμαι αρκετά ικανοποιημένος αλλά όπως φαίνεται θαν πρέπει να βρω νέες ζάντες και λάστιχα για το Κιτ 😂.
Ευχαριστώ αδερφέ για το σχόλιο!!!
I’m getting one ordered a light bar n a new cheap esc an motor combo so hopefully it’s good
Hello Codey, I am still using the stock electronics after all these years. My first upgrades were tires and suspension for this truck. I hope you will enjoy your new toy!
I see new shocks 😱
Yeap you are correct, and I love them already!! Lower than the previous, these are 90mm, combined with the heavier rims, the truck performs much better I could say.
The ride looks good 👍🏿
What wheels do you have on your rig...
Hit me on fb or insta same name,i will send you the link(bought from alliexpress)
Jhosss...
Mantap...
Ban pakai apa bang.
Hello my friend,these tires were bought from banggood,but you can find them also on aliexpress , they are not very soft so they are nice for trailing but not for intense rock crawling . Here is the link www.banggood.com/4Pcs-RC-Car-114mm-Tires-for-110-RC-Crawler-4WD-SCX10-CC01-Wheels-RC-Car-Parts-p-1272058.html?rmmds=myorder&cur_warehouse=CN
What motor and esc are you using?
Stock electronics and stock motor..