Видео

@@toeshifter Thank you very much, I am glad you enjoyed it! Thank you for visit!

@@VermontScaleCustoms Thanks brother! It is a cool spot indeed but I wasn't sure that side will hold after the recent rains. That spot normally had enough surface for a 1/1 truck but nature thought otherwise..

@@rcarty419 Thank you so much Arty! Actually I haven't change the electronics so what's come from factory. The esc looks like the hobbywing 1060 or something similar. The receiver/transmitter is dumborc but rebranded to rgt, if I am not mistaken it is 6channel

@@chaddavis513RC Thank you so much!

I will try to make one in the near future. I made my own so called body mounts as I wanted the body to sit lower and also I shortened the wheelbase of the body.

It is 1/10 scale.

Thank you brother! Everything that comes stock on this truck is nice, outdaded but still very nice.

Thank you! Same problem here, I had to order mine fro Germany plus everything I have put already worth 2 other brand trucks. But I wanted a leaf sprung truck for a lot of time and after a seasonal job I wanted to treat myself..

Thank you my dear friend!

Thank you my friend! I am glad you are enjoying these!!!

Thanks Arty! This is the Marlin yes, but RTR. Worth every penny but ofc it is an old platform.. Stiff like a brick out of the box.

When I started this hobby neither did I. After finding some of Twisted videos I was hooked and wanted a leaf sprung truck badly!

Closer to 91mm.

Thanks! I had to improvise a lot with the mounting system, like almost on all my projects. In this one I mixed some magnets at front, rear custom bed sits tightly on the rear shock hoops + the middle of the body catches on the chassis it self.. For light crawling it hold nicely

@@topqualityfi8216 hehe! This RGT was my first 1/10 scale truck, being cheapest than other doesn’t make it worst to be honest and I enjoy driving all of my creations. Thank you for the visit my friend!

@@JamesDirtRC Thank you James, I am glad you enjoyed the video!

@@13Hardcore4life13 Thank you for watching 🙏🏻

@@PSYCHO13GARAGE Nice to know you enjoyed it Dirk, thank you for visiting brother

@@jonathanbarnette8713 Thanks brother!

@@topqualityfi8216 As a custom adjusted body, I had to improvise to mount the body, magnets at front and the rear part of the hilux sits on top of the shock brackets

@ScaleCustomCrawlers-SCC okay :) i got trx4 sport high trail with clipless bodymounts,and im trying to find new body and wondering how to mount it

@@topqualityfi8216 unfortunately whenever it's a custom body, you will need custom made mounts. There is a possibility you can find some ready to use mounts, you will just marry them to the body. Take a look at aliexpress as I have found few mounts there also

@@topqualityfi8216 hello my friend. No it's not a rc4wd body but a HG body(copy of tamiya bruiser). I have modified the wheelbase though to match the 313mm wheelbase of the chassis, using magnets at front and the bed sits ontop of the suspension bracket

@@KeretaUwais 1.55 inch tires, austarhobbies tires

@@ScaleCustomCrawlers-SCC thankyou brother

@@KeretaUwais you are welcome mate!

@@ИванИванов-б2к3н спасибо! Wpl мосты металлические и коробка / електронника от wpl c74..

@@ScaleCustomCrawlers-SCC благодарю за ответ. 👍

@@SoFloRC indeed! This was my first 1/10 scale chassis also

@@jaredsavage8691 Tires are Pitbull Rock Beast XL 1.9 and the rims are some cheap beadlocks from aliexpress. I think injora has the same patern also.

@@montana4069 hehe , I am glad then as I tried to make it as scale,as possible 😁

@@montana4069 💪😁🙏🏻

@@jackvivek5334 Thanks Jack! Indeed it will be more realistic, I am just too lazy to find a correct size driver.. 😞

@@ScaleCustomCrawlers-SCC i think...1/12 figure best for 1/10 crawler

@@jackvivek5334 oh ok! Thank you for the tip my friend!

Thanks buddy! 🙏🙏

It sure is! Thank you for watching!!

@@KPtain_RC I am glad you enjoyed the video. Thank you for watching! 🙏

1.0 inch both tires and wheels. The tires are from DJ Crawler (bought from aliexpress). Unfortunately I don't remember the name of the wheels. You will need adapters to fit 1.0 inch to wpl though

Thank you for the explanation . is there a tutorial to install an adapter to 1.0 inch alloy wheels ?

@@RC_Advenutur Search for "5mm to 7mm hex adapter, I bought mine from aliexpress. If you don't have any luck, try message me either on FB or Instagram and I'll send you the link

You are so kind James.. Thanks a lot! 🙏

Thank you! They sure do! They are bought from aliexpress, just a generic set. If you can reach me on fb or insta, I can probably find a link.

Thank you, glad you enjoyed it! 🙏

Thanks you! I sure did invested big time on this one, as it was my third ever RC build. Overall though I am happy with the end result.

@@Philip-0711 to be honest no, unfortunately. I am too knew to tf2 platform to distinguish such a problem. Although have you checked all your bolts and have you maybe at least concluded from what exact part do you get the noise? Does it come from the motor? Or maybe the gearbox?

@@DanP100 Thank you, I am glad you loved it 🙏

@@blackspec1855 I used two pieces of styrene as a plate to raise the gearbox around 1cm higher,this video is from another truck, I hope it helps ruclips.net/video/Zqi3Hmicfxw/видео.htmlsi=mZxyheJ8wfOoV5xb

@@VermontScaleCustoms love it Mark, just love it, I also installed later on the skid plate, the ground clearance is perfect, no more belly hanging. The shackle reversal helped indeed, first of all the axles pushed +4mm so better approach angle, but also now the front suspension is a bit angled.

Hehe many thanks! It was so close, but in the end I decided not to push her more.. I am glad you enjoyed the ride!

Thank you very much KPtain_RC 🙏

Indeed it helped actually. The reason is it pushes the axle to the front for better approach angle and also now the suspension is angled and pushes the axles to the inside, works like a charm! Thank you for watching, I am glad you enjoyed the video!

Glad you like it James! I love the new chassis(to me) and I am enjoying playing with it a lot! Can't wait to start working on it..

Glad you enjoyed it Jono! I am glad you found it relaxing, as I do find your videos too! Thank you for watching

@@COAL-CRAWLERS 😁 🙏

@@KPtain_RC I am glad you enjoyed the video, how do you find the quality of it?

@@KPtain_RC thank you 🙏🏻

​@@ScaleCustomCrawlers-SCC Nice channel, liked and subscribed! 😊 👍

@@KPtain_RC thank you for the sub 😁