*This device can be used just with connection to solar panel? I wanna have info about the power produced from the solar panel. Output from panel will directly to the power station, so charging controller is inside the power station*
Hello! Thank you for this video! I have a Honda Element, and it’s a fantastic camper car. Still, I’m discovering that lots of Element owners have had parasitic drain problems - some have reported simple fixes, while others have had to do extensive diagnostics. I'm trying to keep my new car/starter battery, which has a 500-600 cold crank, alive until I have time to do all the needed tests. I also have a 5-10w solar panel with an MPPT portable controller ( that generates .800A maximum ). It charges the battery to 12.6V daily, but by 8 AM, it drops to 12.2V. I mainly want to measure and track the range of + 5A to -.050A current charges and drain. Because the Amp values are so small, I’m reading that I should get the smallest shunt model. However, I'm confused about whether I need a larger shunt because my car battery is up to 600 cold-cranking amps. Would the relay you mentioned, combined with the smallest shunt, solve my problem, you think?
So this meter measures battery capacity based only on voltage? A lifepo4 pack has a very flat voltage curve where this wouldn't be very accurate. There is no way to manually set the Ah capacity of the battery?
Hi, Ive got problem with this meter, I wanted to build a charged with this, the display would be like a display for cahrging. Ive connected dc-dc booster into 12v supply and 12v goes to the shunt as well and then from the output of booster Ive connected it into the shunt - negative and positive one cable went to the sampler thing in the back and the other wire jsut to the xt60 as well as the negative goes there from the shunt.. But for some reason the output from the booster is 11,86V (power supply outputs 12,05V) but when I disconnect to positive wire in the "sampler" in the back of the shunt, the display says 0V si it cant read at that time but the voltage from booster starts to work as supposed. did I do something wrong? Or Do I need to have complete circuit which means i have to have connected battery at the same time? Please help me thank you
Does it consider a NEGATIVE ampere amount when discharging the battery and a POSITIVE ampere when charging? In the minute 20:35 (ruclips.net/video/dmp02-dfaU8/видео.html) you are drawing 10 amps que the CAPACITY number is increasing... same when you was charging the battery. Is there a way to fix this?
Hello, I would like to know where to download the connection plan for this tester. I know how the relay is connected and I have the screen unused. I would greatly appreciate it if you could help me.
very nice rewiew ,,i would recommend the more powerfull version of this product ( the one were the shunt is a stand alone unit ) only connected to the screen via a cable ,, and the relay is a seperate unit purchased by itself,, i have the 100A version and i am gonna purchase the 200A version for a seperate battery,, and windturbine,for the small amount of money they are very good units
Oh also, does this unit measure current / charge in as well as load / drain out numbers, independently (say you are charging the battery with solar but are also load powering some lights at the same time) or does it just give you the sum total of both numbers (positive or minus)? Oh also your product links have expired! It hit me now that this unit you are reviewing looks similar to others but it does not come with a visible shunt. Now I’m confused about whether the ones that do come with a shunt such as the DT24PW have bluetooth connections. 😅😅 this company has so many different models but no official website to show them all in one place?!
Power LED at the lower right corner should light on when relay is on and off when relay off. Can't see any light there on your device, maybe it's broken?
Hello, If you live in Canada or USA, I am giving away this DL24P 180W load and energy meter. Make sure to sign up for it ruclips.net/video/-UblSfUEY-0/видео.html
hello I can ask if the mobile must be connected to display the performance curve or if the device remembers them and displays them after connecting the mobile. If it remembers the data for how long it can store it. I want to monitor the performance of a wind farm in my absence. Thank you very much for your possible answer.
how do you meter a battery properly? the charge is from out to in. and the "in" is battery side ? or do I have to charge the battery and then clear to count how much is used? I am try to make a portable battery bank with accurate energy meter to tell how much energy is left (important to this project)
video için teşekkür ederim. Birşey sormak istiyorum. dt24 cihazı ölçüm yaparken telefonu belirli bir süre sonra bağlantı kursam geçmişteki ölçümün grafiğini görebilir miyim? anlatabildim mi? amacım şu; sürekli değişen bir dc kaynağını ölçmek istiyorum. daha sonra dt24 çalışırken telefon ile online bağlanıp geçmiş voltaj değişimlerini görmek istiyorum. teleşekkür ederim.
@@WattHour you mean it's not in the appstore ? There a lot of app about managing the DT24 but none of them work. They all ask for the wifi to be connected, but the DT24 doesn't have wifi. Very confusing
@@WattHour hi buddy I only gets maximum voltage and minimum voltage of battery but when I charge it it goes to 14.2 volts and gives me an over voltage warning if I higher the battery voltage in the menu then my voltage drops it's like 50% battery when there's more on the battery graph strange
The video title and description should make it clearer that this is a DC meter. The Cost and CO2 figures are largely useless in DC applications, typically from Solar power.
Hello, I have already contacted you via AliExpress about KH140F. This channel is separated from youtube.com/@robojax RUclips channel to focus on Energy and Converters. Please contact me via Robojax.com contact page. Yes if you pay, I will make the review. But if ou want it for free, I don't have time for free stuff and I don't need it. After review I can send it back to you if ou pay for the shipping.
ok after using it for a while this voltmeter has some flaws. The text color are juste absurd, impossible to read but the worst is the APP, man oh man the app is shit to the max.
*This device can be used just with connection to solar panel? I wanna have info about the power produced from the solar panel. Output from panel will directly to the power station, so charging controller is inside the power station*
Hello! Thank you for this video! I have a Honda Element, and it’s a fantastic camper car. Still, I’m discovering that lots of Element owners have had parasitic drain problems - some have reported simple fixes, while others have had to do extensive diagnostics.
I'm trying to keep my new car/starter battery, which has a 500-600 cold crank, alive until I have time to do all the needed tests. I also have a 5-10w solar panel with an MPPT portable controller ( that generates .800A maximum ). It charges the battery to 12.6V daily, but by 8 AM, it drops to 12.2V.
I mainly want to measure and track the range of + 5A to -.050A current charges and drain. Because the Amp values are so small, I’m reading that I should get the smallest shunt model. However, I'm confused about whether I need a larger shunt because my car battery is up to 600 cold-cranking amps.
Would the relay you mentioned, combined with the smallest shunt, solve my problem, you think?
So this meter measures battery capacity based only on voltage? A lifepo4 pack has a very flat voltage curve where this wouldn't be very accurate. There is no way to manually set the Ah capacity of the battery?
Hi, Ive got problem with this meter, I wanted to build a charged with this, the display would be like a display for cahrging. Ive connected dc-dc booster into 12v supply and 12v goes to the shunt as well and then from the output of booster Ive connected it into the shunt - negative and positive one cable went to the sampler thing in the back and the other wire jsut to the xt60 as well as the negative goes there from the shunt.. But for some reason the output from the booster is 11,86V (power supply outputs 12,05V) but when I disconnect to positive wire in the "sampler" in the back of the shunt, the display says 0V si it cant read at that time but the voltage from booster starts to work as supposed. did I do something wrong? Or Do I need to have complete circuit which means i have to have connected battery at the same time? Please help me thank you
a link for the relay would have been great ! But thanks for the info it could be a good use of this voltmeter.
Does it consider a NEGATIVE ampere amount when discharging the battery and a POSITIVE ampere when charging? In the minute 20:35 (ruclips.net/video/dmp02-dfaU8/видео.html) you are drawing 10 amps que the CAPACITY number is increasing... same when you was charging the battery. Is there a way to fix this?
It doesn't. I almost was deceived too. But there is one of their models that does both positive and negative automatically.
the 100A version and higher( with the shunt seperate) i belive does@@leviahamefula3994
Hello, I would like to know where to download the connection plan for this tester. I know how the relay is connected and I have the screen unused. I would greatly appreciate it if you could help me.
very nice rewiew ,,i would recommend the more powerfull version of this product ( the one were the shunt is a stand alone unit ) only connected to the screen via a cable ,, and the relay is a seperate unit purchased by itself,, i have the 100A version and i am gonna purchase the 200A version for a seperate battery,, and windturbine,for the small amount of money they are very good units
I did not find the E_test in the Apple App store.
I just search and found it. here is the link apps.apple.com/us/app/e-test/id1478623332
Thanks for your review
can you zoom out to view multiple days
Oh also, does this unit measure current / charge in as well as load / drain out numbers, independently (say you are charging the battery with solar but are also load powering some lights at the same time) or does it just give you the sum total of both numbers (positive or minus)?
Oh also your product links have expired! It hit me now that this unit you are reviewing looks similar to others but it does not come with a visible shunt. Now I’m confused about whether the ones that do come with a shunt such as the DT24PW have bluetooth connections. 😅😅 this company has so many different models but no official website to show them all in one place?!
Power LED at the lower right corner should light on when relay is on and off when relay off. Can't see any light there on your device, maybe it's broken?
Hello, If you live in Canada or USA, I am giving away this DL24P 180W load and energy meter. Make sure to sign up for it ruclips.net/video/-UblSfUEY-0/видео.html
@@WattHour Thank you for chance of winning DL24P. It could be very useful for me. Signed up (as lorso) and completed all steps.
My meter doesn't display voltage, I believe after I choose default settings.. how can I fix?
Please help
hello
I can ask if the mobile must be connected to display the performance curve or if the device remembers them and displays them after connecting the mobile. If it remembers the data for how long it can store it.
I want to monitor the performance of a wind farm in my absence.
Thank you very much for your possible answer.
Hi, Lalit is live. Once disconnected it is gone. There is exporting option to excel you may use before disconnecting.
how do you meter a battery properly? the charge is from out to in.
and the "in" is battery side ?
or do I have to charge the battery and then clear to count how much is used? I am try to make a portable battery bank with accurate energy meter to tell how much energy is left (important to this project)
Yes testing ⚡🔌💡🔋👍
video için teşekkür ederim. Birşey sormak istiyorum. dt24 cihazı ölçüm yaparken telefonu belirli bir süre sonra bağlantı kursam geçmişteki ölçümün grafiğini görebilir miyim? anlatabildim mi? amacım şu; sürekli değişen bir dc kaynağını ölçmek istiyorum. daha sonra dt24 çalışırken telefon ile online bağlanıp geçmiş voltaj değişimlerini görmek istiyorum. teleşekkür ederim.
impossible to find the app for android in the app store...
Of course. That’s why I made the video to tell you how to get it.
@@WattHour you mean it's not in the appstore ? There a lot of app about managing the DT24 but none of them work. They all ask for the wifi to be connected, but the DT24 doesn't have wifi. Very confusing
Yes I mean it is not. I believe I mentioned it
È possibile collegarlo al pc via bluetooth? Grazie
Can help to share DT24TW manual ..thanks in advance
Hi, I made this video because there was no manual. This video is the manual.
Hi buddy is there away to update it as my menu is different.
Hi, I have shown it to change it to English or Chinese. If you dint see it then you have different app. Install what I showed
@@WattHour hi buddy I only gets maximum voltage and minimum voltage of battery but when I charge it it goes to 14.2 volts and gives me an over voltage warning if I higher the battery voltage in the menu then my voltage drops it's like 50% battery when there's more on the battery graph strange
Hi, you gotta set the battery capacity to get proper battery fill/empty indication.
Can you please share dl24 software link for android ?
Just added the link to the software in the description.
The video title and description should make it clearer that this is a DC meter.
The Cost and CO2 figures are largely useless in DC applications, typically from Solar power.
thank you. The title says DC and on the image before video is played also it says DC.
Dear friend, your video is so exciting. We are also a producer of similar products. Our product name is KH140F. Can I send you an evaluation?
Hello, I have already contacted you via AliExpress about KH140F. This channel is separated from youtube.com/@robojax RUclips channel to focus on Energy and Converters. Please contact me via Robojax.com contact page. Yes if you pay, I will make the review. But if ou want it for free, I don't have time for free stuff and I don't need it. After review I can send it back to you if ou pay for the shipping.
ok after using it for a while this voltmeter has some flaws. The text color are juste absurd, impossible to read but the worst is the APP, man oh man the app is shit to the max.
indeed the app is junk