Making a Stainless Steel Folding Climbing Knife! Part 2
HTML-код
- Опубликовано: 19 мар 2023
- Head to squarespace.com/forge to save 10% off your first purchase of a website or domain using code FORGE.
OUR PRODUCTS: alecsteeleco.com/
INSTAGRAM: / alecsteele
ALECSTEELECO RUclips: bit.ly/alecsteelecoYT
ALECSTEELECO INSTAGRAM: / alecsteeleco
LEARN BLACKSMITHING ONLINE: beginblacksmithing.com/
PATREON: / alecsteele
Instagrams:
Alec: @alecsteele
Jamie: @jamie.popple
My name is Alec Steele and I am a 24 year old blacksmith. We make videos about making interesting things, learning about craft and appreciating the joy of creativity. Great to have you here following along!
If you want to get into blacksmithing or knifemaking, check out our Montana based online store where we stock a range of great metalworking equipment for these crafts as well as our work-wear line and other products: alecsteeleco.com/
Thank you for watching!
Alec
/ alecsteele
INSTAGRAM @alecsteele
FACEBOOK PAGE / alecsteeleblacksmith
MUSIC:
Epidemic Sound - goo.gl/iThmfx
-signing up at this link supports the show!
SoundStripe soundstripe.com?fpr=alec84
- signing up at this link supports the show!
MUSIC - goo.gl/iThmfx signing up at this link supports the show!
------------------------------------------------
AMAZON AFFILIATE LINKS TO GEAR I LIKE, buying here supports us:
--------------
CAMERA + MAIN LENS: amzn.to/2CrLyYP
WIDE LENS: amzn.to/2CsAZou
TRIPOD: amzn.to/2GpBX7f
MIC: amzn.to/2CrBmiQ
SD CARD: amzn.to/2sF0i7g
COMPUTER: amzn.to/2C4i0oo
Alec Steele Blacksmith 2022 Развлечения
Hearing Alec say he's been working with Jamie for 6 years is just absolutely insane. Where has all the time gone??????
Has it only been six years!?
More importantly how is Jamie still sane?
@@razghost2 Most importantly, where's the rum gone?
Six years doesn’t even seem enough I remember Alec doing the live shows and then Alec getting the new workshop and Jamie just starting and for Alec to have gone to America it feels a lot longer
@@mariemacfhionghuin11 I'll do you one better, WHY is Gamora?
Folding knife makers: Planning out angles and lockfaces extensively
Alec: *grinding and bending furiously*
I think making a slot out of the hole might have just worked
Your recent videos on recreating mechanisms has been so cool to watch! You could do a whole series just making wacky folders!
I recall in the eighties that there was about fifty Blacksmiths in Britain. Now the world will never run out of metal bashers. Also, I am absolutely fascinated by the skill involved in grinding a cutting edge. Its great to hear the learning moments too. Oooooh, oooh ooooh. keep on
Honestly, if you and Jamie made a 2nd channel about caving I would watch that for years.
Alec you always leave me wanting the next episode to already be out. Awesome work man.
Serrations definitely have their place... great cutting through really soft/ Malleable stuff but can easily get damaged tougher items!
For an everyday use or knife that will be abused plain blade is the way to go!
Jamie is so taking over Alec’s gig soon.
This is one of the more technically complicated designs I've seen Mr. Steele tackle. All those tollerances need to be spot on to make such a locking mechanism. Have no doubt Alec will succede, and it will be quite an impressive accomplishment. Can't wait to see the rest of the journey on this one.
It's always nice to learn something new. I can only imagine how much more you'll master your craft in the next or 10 years. As a framer/carpenter, I'm always learning something new, learning tricks of the trade, and surprising myself to see what I'm capable of. Great work fellas.
I'm probably late to the party, but having used a Spatha for years while caving I don't think you should have gotten rid of the blade slot. It's not only for opening the blade but a key: we often use it to open shackle-bolts when we don't want to get tools out, and it's very useful.
Hey Alec I know you probably won’t see this. But I was wondering if a series about beginning your journeyman smith would be something you would consider? Definitely a series I would watch from someone I enjoy spending my time watch learn and progress.
Will stelter has some videos like that
Alec and Jaime’s bromance is the greatest!!!!! You guys are the best.!!!
This defiantly shows the hard work needed to make knives, especially for folding knives.
Lol at Jamie’s ever so faint “that’s what she said”
For scales, instead of gluing or clamping together, I usually use carpet tape. Strong hold, double sided tape with a structural weave that keeps it from going sideways on ya
I've always carried a knife with a 50/50 straight and serrated edge. The serrations make cutting seatbelts off of people etc. so much easier than a straight edge. Great project!
That's why there is no perfect knife for everything. Personally i have never liked serrated blades (they are difficult to sharpen). But for safety cuts they are really much better than clean edge.
@@ogi22 which is just the best reason to buy more knives, amirite?
How often does that situation come up?
@Coloneljesus I used to be volunteer fireman.
@@fyreantz2555 Hehehe, how did you know? Are you a seer or something? 😁
I think the perceived advantage of the serrations was just the difference in leverage using the heel of the blade vs the tip.
Good observation
2:05 that’s also why you always make sure your rope does not run over sharp corners / rocks 👍🏻
*Important* Hearing you talk about how important it is that the knife remains closed when you don't want to cut anything just reminded me about something you may have over looked...... the reason climbing knives are better WITHOUT the little stand-up stud openers is because that stud can catch on things and open when you don't want it to!! If you want that stud, you need to have a locking detent so the blade never opens unless you want it to. My knife has one of the ones you press down with your index finger first. Hope this helps 😊
Edit: that little retaining grove is not enough to stop the blade opening if you have a stud that can catch on things
Loving the spelunking bits in the videos! Wonderful content!!
The serrations on a utility knifes can be a literal lifesaver when speed in cutting is essential. The straight edge can absolutely cut a seatbelt or rope but the serrations are faster and less prone to slipping.
You have sufficiently helped me understand why they cost so much...and you have done the serrations yet!
Serration is great for cutting rope/string - and nothing else. You make a climbing knife, so it makes sense to serrate it. Nice work 👍👍
I'M SO EXCITED! This is just the best series of anything of all time in the universe, ever
you want to be careful with how you situate your harness before you repel because its near impossible to adjust after you start the deccent and it can be soooo painful if it's wrong, especially a tied Swish seat
5:54 now, these are some badass clamps, looking like they could be from different era or hand-made.
Alec! I thought of a project idea for you with your series of re-creating your tools! That weird little pen thingy that you push down and it shoots a spike into the metal to make a little mark. No idea what it is, what it's called, or how it works, but it seems like something mechanical you could try!
It’s called an auto punch or spring punch. Great idea!
Auto punch. Used them about everyday when I was in the military. I called the one I had my Superman punch. Awesome idea
Makes me happy to come back to knife making.
Yep, the serrated edge is there for a reason Alec....like most safety gear it's designed with lessons learned in blood
Alec good sir, I am sure you have already found a solution, but those lock mechanisms are usually a 2 piece lock. A spring in the rear, and a pivoting locking bar. I cant speak for that one specifically though. I love watching you learn by just getting in there and figuring it out. Keep doing what you do man!
Much love to you the wife the puppers and to Jamie happy 6 years working together ❤️ 💙 ♥️ 💖 💗 I love your channel and it has made me move further out of my boundaries in blacksmithing knives. Thank you so much for your in depth videos and just plain fun you have in the shop. I wish you many many more years of experience love for the art and maybe one day I will be able to buy one of your knives or hammers. With much love and true respect from central Florida.
I'm with you Alec, Ive always hated serrated edges too lol. However it actually seems useful for this application.
Alec makes me want to become a blacksmith
u can easly become one with something like skillshare ^^
Every 9 days for a video that's insane
@9:30 just looked at it and that will create a lot of slop in the lockup. Rough fit, make sure the latch is a smidge bigger than the notch, harden+temper the spring and latch, and then handfile the tab to fit the notch perfectly. It needs to be almost airtight. Also, the transition where the tab falls in to the notch needs to be crisp, but on the tab needs a small, small radius.
Am I the only one who loves seeing Jamie's ideas seeing put through the test?!
Your pivot hole would have worked as a horizontal slot as well. Good job so far!
Oh yeah!!! Thanks Alec!!!
Coming along nicely
finger lock release and spring close lock... best of both worlds. spring style back lock for opening and locking and finger lock to lock in place and both must be pressed to release for closing...
Alec: has a lathe
Also Alec: grinds a point "as close to center as I could get"
You need to thin out BOTH sides of your button up to your pivot point. You can see it in your Ruler example... as you press down on the ruler bother sides of the ruler bend on either sides of your hand. Your button is stiff on one side, making your deflection angle and depth wrong. Test this with t he ruler again, strap a steel bar to one side of your 'button' on the ruler and try to press it. If you don't bend on both sides it will be more difficult to lift the locking nub high. You can make the lock side thicker/stiffer... but it needs SOME deflection.
You would also be able to accurately make bevels with a Tormek T8 machine. Plus it's super good at resharpening your drills and knives and scissors...
The beauty of tensile strength versus shearing strength. Quite eye opening when you’re suspended 70 meters from terrafirma.
ALEC - QUICK TIP! IF you are going to use the Steel foil 'Envelope' trick.... BEFORE you seal up the envelope with the blade inside, HEAT the envelope and knife up FIRST BEFORE SEALING IT UP. This drives out the 'Air'/oxygen from the 'Envelope', and then while it is STILL HOT, fold over the last seal. This is why you see those little 'Buttons' on jars of food, the jars are filled with warm/hot food contents, then sealed, the process drives out the air/oxygen and thus causing a vacuum inside...
This will help STOP the envelop 'Puffing up' on the heat treatment/hardening cycle 👍 😎🇬🇧
I want to see Alec make a custom wrecking bar
Serrated knives for the win
I need some full length caving videos.
alec that locking mechanism is supposed to be two pieces; a locking lever and a separate leaf spring to provide tension.
I’m glad I’m not the only person that feels the same way about serrated edge blades. I’ve never cared for them and never really found them useful in any way I much prefer a straight edge blade.
I have always liked serrated edges myself.
Yep, serrations are there for a reason; they're there specifically for cutting rope. That's actually why I hated the 2010s trend towards putting serrations on pretty much all folding pocket knives; rope is pretty much the only thing I never actually have to cut. It's so nice to see nice regular-blade pocket knives being just as common as half-serrated blades again these days.
EDIT: Before anyone points it out for me, yes, the reason for the serrated knives in the 2010s was a trend towards emergency knives made to help you escape from a crashed car, with a boss for breaking the window and serration for cutting a seat belt. Though most of them also had a blade embedded in a narrow channel specifically for cutting seat belts, too, so... Yeah. Anyway, yes, the serration on that trend wasn't for rope, I'm just relating the trend to the fact that it's _usually_ for rope.
Hope all is well!
Alec's been working with Jamie six years? I won't believe it, surely it's only been two! I remember Alec sharing the workshop with Sam the Farrier.
Jamies subtle voice comment at 9:49 😀
cool knife
2:03 and that's why edge protection is so important
I wish Alec start some big serious project again ..awesome sword or so :)
Serrated is amazing for rope/fishing line among other things, IMO it's just easier to make the rope not slide away and only get cut half way through
I hate serrations, but, quite honestly, they are the best for almost every task aside from wood working. And not just a little better, a LOT better.
Haha Alec’s knife has a mushier engagement than Jamie’s.
Also the music in this episode was 🔥🔥🔥
I'm interested if that back tab will stay. If it does I see a potential issue when you are in a tense situation because you tend to grab harder than you realize and you could release the lock on accident. Otherwise all the best.
instead of the round hole for the pivot you can make an oblong hole which will keep the lock in palace while having the necessary clearance to unlock the blade 😉
That is why edge protection is important!
In most lockback knives the lock and spring are two separate parts. The lock often does just rotate about the pin and has a spring in the end of the handle to force it to lock.
make a pair of braai tongs with a spring to keep the tongs open when not in use and a clip to keep it closed when storing
who else thinks jamie and alec need a caving vlog channel
I want to see more caving too
Caving is just the adult version of playing in the mud.
“Testicles just moved a lot” 😂😂
1:46 I wonder whether the difference in ease of cut isn't simply down to the fact that the serrated edge is on the strong of the blade (close to your hand), whereas the regular edge is farther away from your hand.
i would love to see you create, because i know it isn't out there, a spring/thumb/tension lock mechanism for a folding knife....
Maybe you should forge a Damascus high tensile climbing rope.
I appreciate you always showing your mistakes. Gonna be a nice looking blade!
The serrations break the surface and start a weak point for the edge to cut as you go through the motion
Hey Alex I don't know if you all use guide rope rollers in spelunking. We use them in repelling. It would make for a good video or two making them.
Ive never been compelled to comment first, but I have also never been this early
Nailed it!
Very interesting.
It’s important that ropes can be cut easily as if you are tangled or otherwise in an emergency you need to be able to cut a rope at any time.
I wanted to comment on your last video that the pivot isn't gonna work the way you wanted to pin it in on both sides. It's was so satisfying seeing you finally get to the realization 😂
hey Alec you should try and make a golf club the old way that would be sick
you should get some Veff serations put on it 👌👌👌👌👌👌
Needs a stop pin. I’m surprised a more one handed locking mech isn’t used for these climbing knives like a frame lock or the Demko Shark-Lock
Funny to think about how the original Petzl knife probably took weeks of CAD drawing and simulation before any physical materials were even touched. I think I like Alec's approach more...
you know on the first video i was like "but if you pin the spring on both ends it wont work, metal is springy in the sense that you can bend it but its not springy in the sense that you can stretch it like a rubber band... oh well ALEC PROBABLY KNOWS WHAT HE'S DOING" .. turns out i was right and wrong :P
alternatively you can also turn the hole in the 'spring' part into a slot, that way its secure but it can also bend because the slot allows the spring material to move
Agreed, but this is also definitely the wrong way to do it, because it is far too thin and delicate in order to achieve the function of a lock back. Basically he has unintentionally created a hybrid between a traditional slip joint and a lock back. Unfortunately, there's a reason they don't exist.
Love the channel keep it up would you entertain the idea of making other climbing gear from Damascus
So, my #1 issue with serrations is that they are harder to maintain, my #2 issue is that they frequently are only ground in from one side. Doing Serrations right is actually fantastic, but the key is to do them right
When climbing, make sure to avoid birds with serrated knifes for wings and you'll be fine. 😂
🗡🦅
Any one else think that Alec is part Middle Earth Dwarf? He likes forging, and he likes going underground.
8:32 heavy Hans Landa vibes.
Also usually for back locks like that there is a spring leaf spring like price that helps ... if you put too much pressure on the lock like that it can fail
I considered buying a petzl Sparta but in the end I went for the buck 770 flashpoint as rather than a stiff detent to hold the blade in it actually locks in both closed and open positions which I see as being more safe however the internal mechanism would certainly be more complicated
Tried looking at tool grinders, but would not load. Enjoyed the vid.
My craziest rope cut was when I had a rope attached to a tree and tensioned to about 3 tons.
Had to cut it.
Put the knife on it, moved the knife some 1-2mm and that was all the rope needed to catastrophically fail
Have you ever thought about making a pair of Damascus channel lock pliers?
7:16 needed a transfer punch set for that.
Maybe a secondary V spring would help give it the extra oomph it needs.
Try a normal edge on Sisal rope! The serrated edge is far superior on that.
I dunno about everyone else but I want more climbing content lol