Nice get and appreciate your enthusiasm & featuring this CZ. Thinking about getting one as well. A machinist can mill the mag release pocket on pre-3+ mags if that's all you can find. Somebody was supposed to come out with a legit drill/mill jig to do just that but no updates so far.
SB tactical sells a foldable "brace" for this that is totally compliant. Do not modify that or any brace to act ask a shoulder stock and you should be ok. Once you do you will need to register it as an SBR. No matter the caliber it will still be considered as a short barrel rifle. PCC's are a real grey area at the moment. I would be extremely careful about the content you release about this weapon. It will vary from state to state. There is a form you can take a look at to see if you are compliant, it is a 4499. Although it is kinda vague it will give you a good idea.
I appreciate the info! So that foldable brace is what I was originally going to get but was then told it’s illegal for me to have in my state and I needed to have the retractable one only. Idk like you said it’s a pretty grey area so at the moment I left that part alone. I just got notification yesterday that the retractable brace was finally back in stock but now I don’t even know if I want to go this route because of all the questions about it. Idk, that brace probably sold out by now too since it’s been out of stock for so long. Thanks again, I will definitely take a look into the 4499 form. 💪
Nice! I tired to get one in a neighboring state but it was missing the groove to be able to stay locked in place. I’ll have to look up what you said and find a place. Thanks for the comment! 💪
If you put a stock on it and don’t have a tax stamp it makes it illegal. All braces that are put on a weapon from assault rifles and pistol caliber carbines makes it a pistol. If you put a stock on it your turning it into a rifle, so then you would need a tax stamp. The folding brace you see in the pictures are fine! I got mines and I put a folding brace, new strike industries charging handle, Odin mini weapon light with pressure switch, and sig MSR red dot.
Thanks for the info. The gun shop told me specifically that it was illegal to put the fold away brace on it. Idk I’m in MD and they are pretty strict on a lot of things. They told me I can only add the retractable kind for some reason. I really want to order one so I’m going to have to figure this out. How do you like that charging handle? 💪
@@robertocantu4288 I was going to get it from SB Tactical. I put my email in for the wait list since it’s been out of stock since forever now. They notified me for the folding one but then I was told I couldn’t get it so I’m waiting for the retractable one. Hope that helps! 💪
Are you able to use your iron sights still with that holosun? I have the older model of the scorpion with the holosun 510c and was looking to get the iron sights that come on the evo 3 plus since they ride higher.
Unfortunately it’s still blocked. Not completely but it wasn’t made to work together. If they put a slight dip in the Holosun it would have worked. Hope that helps 💪
Unfortunately it’s still blocked. Not completely but it wasn’t made to work together. If they put a slight dip in the Holosun it would have worked. Hope that helps 💪
Don't worry about RUclips gun guys enjoy the journey enjoy your guns. It gets expensive anyway you cut it
Thank you, I appreciate that! Yea it definitely does lol. So far I love it though. It was a pleasure to shoot. 💪
Nice get and appreciate your enthusiasm & featuring this CZ. Thinking about getting one as well.
A machinist can mill the mag release pocket on pre-3+ mags if that's all you can find. Somebody was supposed to come out with a legit drill/mill jig to do just that but no updates so far.
Thank you and I appreciate the info! Yea the CZ is one of my favorites, I think it’s definitely worth picking up! 💪
@@Jsean Roger that. Keep on Rocking brother.
SB tactical sells a foldable "brace" for this that is totally compliant. Do not modify that or any brace to act ask a shoulder stock and you should be ok. Once you do you will need to register it as an SBR. No matter the caliber it will still be considered as a short barrel rifle. PCC's are a real grey area at the moment. I would be extremely careful about the content you release about this weapon. It will vary from state to state. There is a form you can take a look at to see if you are compliant, it is a 4499. Although it is kinda vague it will give you a good idea.
I appreciate the info! So that foldable brace is what I was originally going to get but was then told it’s illegal for me to have in my state and I needed to have the retractable one only. Idk like you said it’s a pretty grey area so at the moment I left that part alone. I just got notification yesterday that the retractable brace was finally back in stock but now I don’t even know if I want to go this route because of all the questions about it. Idk, that brace probably sold out by now too since it’s been out of stock for so long. Thanks again, I will definitely take a look into the 4499 form. 💪
You can get the 35 rnd. Magpul p-mag anywhere for around 20 bucks
Nice! I tired to get one in a neighboring state but it was missing the groove to be able to stay locked in place. I’ll have to look up what you said and find a place. Thanks for the comment! 💪
You can get a 35 rd mag from Yetiwurks & a 30 rd mag and 50rd drum from CZ customs. All will fit the 3+
Thanks for the info! 💪
HB Industries Let me correct this . It’s HB Tactical , Mid West Industries makes a very good blast can ( diverter ) helps send the noise down range .
No it's hb Industries..you had it right the first time
Nice video.
Thank you, I appreciate that! 💪
If you put a stock on it and don’t have a tax stamp it makes it illegal. All braces that are put on a weapon from assault rifles and pistol caliber carbines makes it a pistol. If you put a stock on it your turning it into a rifle, so then you would need a tax stamp. The folding brace you see in the pictures are fine! I got mines and I put a folding brace, new strike industries charging handle, Odin mini weapon light with pressure switch, and sig MSR red dot.
Thanks for the info. The gun shop told me specifically that it was illegal to put the fold away brace on it. Idk I’m in MD and they are pretty strict on a lot of things. They told me I can only add the retractable kind for some reason. I really want to order one so I’m going to have to figure this out. How do you like that charging handle? 💪
Where can i buy the retractable brace for the 3+?
@@robertocantu4288 I was going to get it from SB Tactical. I put my email in for the wait list since it’s been out of stock since forever now. They notified me for the folding one but then I was told I couldn’t get it so I’m waiting for the retractable one. Hope that helps! 💪
Are you able to use your iron sights still with that holosun? I have the older model of the scorpion with the holosun 510c and was looking to get the iron sights that come on the evo 3 plus since they ride higher.
Unfortunately it’s still blocked. Not completely but it wasn’t made to work together. If they put a slight dip in the Holosun it would have worked. Hope that helps 💪
@@Jsean thanks for your feedback! Sucks that it doesn’t co witness but it is what it is 👌
Nice! Hey what is the actual model of your holosun?
Thanks! This Holoson is the HE510C-GR green dot! 💪
@@Jsean I just put the order in! Thank you!
@@neykoylions nice, hope you like it! Let me know how you like it when you get it if you can 💪
Nice gun bro
Thank you! It’s definitely one of my favorites and it’s a pleasure to shoot. I 100% recommend it 💪
Does that holosun clear the iron sights ?
Unfortunately it’s still blocked. Not completely but it wasn’t made to work together. If they put a slight dip in the Holosun it would have worked. Hope that helps 💪
Sup kicko you can get parts from A3 Tactical & the brace extension butstock
Once u get brace it'll be all worth it.
Thanks for the input. I actually got an email saying the braces were back in stock but then I missed it smh. I can’t wait to get that! 💪
What was the price on it ?
If I remember correctly I think I paid around $1000 for it at my local shop. It’s worth it though. One of my favorites. Hope that helps! 💪
What model name/number Holosun is that ? Thanks
510c