Touchlessly cleaning a muddy 4x4
HTML-код
- Опубликовано: 15 сен 2024
- Really muddy 4x4's are no match for Nertas Active Diamond. Clean in around 5 minutes. Thanks Rob. For more info please PM me or send me an email at phil@nerta.net.au.
We have made available a kit which includes 5L of Carnet Jumbo, 1 Liter of Anti Insect and a Quality High Pressure Foamer for only $125 + GST + Freight.
This is available on our online shop at the following link, www.nerta.net.a...
Please note that this is available only in the following states in Australia, Queensland, Norther Territory and New South Wales.
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different. We apply the soap through a high pressure foamer and then use high pressure water as a “sponge or a broom". We then work the water back into fresh soap, either from the bottom to the top or backwards in the case of truck trailers etc. In this way we use the soap more efficiently. (If we wash from the top down we would simply wash the soap off the vehicle which kind of defeats the purpose). We then rinse from the top down.
Nerta Queensland this should be in the description of your every video
Apparently your English is basic af as well. Literally explained in the post if you bothered to read it.
Chiefs Australia sorry that shampoo or soap is?
Nice! I order 5 Liter Nerta Active Diamond Foam yesterday. Nice to se you Wash car.
Why do they spread water from down to up? Water goes down which means they have to wash where they already did.
So gratifying!!
lol 1:46 something flew off the window
Zeval Satriadi LOL🤣
It's was a chrome trim piece
Cause weight reduction bro
watching this is kinda satisfying & annoying at the same time ,
I feel that I wanna jump into this video, grab the sprayer and give more attention to wash the undercarriage clean
When a vehicle is as dirty as this (dried on mud), the best option is to pre-soak the mud with foam. If you go straight to blasting with a pressure washer, you need to soften the dried mud first before it will really remove. Soaking with foam makes rinsing the truck for the first time much easier.
Secondly, when washing a truck or large vehicle, it is pretty common to start rinsing from the bottom to top, because again - you keep the solvent on the paint as long as possible and it doesn't dilute immediately until you hit it with the pressure washer. With the second or final rinse, you would obviously rinse top to bottom
If any of you were hardcore 4 wheelers, I am sure you have tried to pressure wash truck caked with dried mud. You either need to use excess pressure, or pre-soak the mud to remove it easily and without wasting tons of time and water.
Alguien me puede decir por que chingados lavan los carros de abajo para arriba? No entiendo
how about roof?
What about the top of the roof?
OMG! RINSE FROM THE TOP DOWN FOR GOD'S SAKE!! Why is this so hard to understand??
OMG I DID RINSE FROM THE TOP DOWN, DO YOU NEED GLASSES
@@chiefsaustralia9012 Lol I guess everyone else who called you out on it is blind too.
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom". The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose).
Then rinse from the top down to finish the cleaning process.
Why do these never start with a pre-rinse?
what where the products used and ratio?
I need to know what that pressure hose is called with that soap attachment
CR RACING 254 foam gun
When will he learn to start at the top then bottom
Ostrich LegsJDL This is touchless washing, you start at the bottom.
what's the name of this soap
Whoever this person was... He really didn't do it properly... !!
000000
what is the psi and gpm of the machine ?
thank you in advance
vickash10 3000psi at 21l/m
rule 1. never carwash on direct sunlight.
rule 2. too much water pressure will destroy ur paint
rule 3. water~soap~water
rule 4. start on top then later to bottom.
They always do it wrong. Start at bottom, wash in sunlight, wash in a muddy carpark. and so on. I guess the water Pressure in such a small distance to the paint will clean their vehicles without any soap.
++The pressure is so high, that parts of the Window Frame fall off . ROFL
good catch, had to rewatch
#Rule 1 : Correct. The fact that the sun shines does not show how warm the surface is.
#Rule 2 : They use a pressure washers that offers a hugh GPM, this will not harm the paint. Not at all.
#Rule 3 : The dillution ratio is about 2%.
#Rule 4 : Pre-wash - bottom up. Wash - top down. Rinse - top down.
* stains as water dries up ... .
did not do a good job in wheel wells and other parts in them.
i know, he looks like he don't give a fuck although he is advertising it !!
o produto parece ser até bom, principalmente pra veículos grandes e pra trabalho como caminhões ônibus máquinas agrícolas tratores etc. porque ninguém vai ficar alisando um caminhão de 20 metros. mas sinceramente esse senhor que faz a lavagem é um péssimo profissional. aplica o produto com pressa ficando várias partes sem o produto. durante o enxague também, ele sequer joga água direito no paralamas. queimação de filme total pra marca.
Undercarriage..?
its only a demo not a detail buddy
Wash from the top down
Is it just me or does anybody else get annoyed seeing people wash the soap from bottom to top? I thought the convetional method was top to bottom...The truck also isn't very dirty...Nothing a hose and car washing soap wouldn't fix...
the way thier foam work they to bottom to top so it dosen't wash the foam away
i love job
Yeah I just watched 376 chemical guys videos, and so you might've done it wrong
Top to bottom wth you doing
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different. We apply the soap through a high pressure foamer and then use high pressure water as a “sponge or a broom". We then work the water back into fresh soap, either from the bottom to the top or backwards in the case of truck trailers etc. In this way we use the soap more efficiently. (If we wash from the top down we would simply wash the soap off the vehicle which kind of defeats the purpose). We then rinse from the top down.
this guy missed a lot of spot actually
9 life this guys a bit dodgy mate
It's simply for trucks you go bottom to top ...for cars from top to bottom ...If your cleaning a dirty car and you go bottom to top the mud splashes to the top part of the car which leave water and dirt marks ....
Anyone can help me out with this logic too ....I don't understand why bottom to top for trucks ...
sorry that shampoo or soap is?
Serginho Miranda it's Nerta's Active Diamond
Thank you. Can I get it here in Mexico? as? and where? and what price does it have?
Does not another soap work like that? to remove all the dirt?
To many booty hurt ppl in the comments section
top to bottom and you are too close with the power washer. Also, it is usually good to rinse the car off before soaping it up.
Do people actually pay for this???
Top to Bottom kid!
Na Cob, When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different. We apply the soap through a high pressure foamer and then use high pressure water as a “sponge or a broom". We then work the water back into fresh soap, either from the bottom to the top or backwards in the case of truck trailers etc. In this way we use the soap more efficiently. (If we wash from the top down we would simply wash the soap off the vehicle which kind of defeats the purpose). We then rinse from the top down.
although he is ruining the truck and washing bottom to top like a moron, it is satisfying watching the dirt come of with a gernie
Real Eyes Realise Real Lies This is touchless washing, you work bottom to top.
FCFordLord this is youtube and you're a moron
You are not doing it correctly my friend
wasn't really that muddy and pretty sure a gerny would remove all that dirt anyway on it's own
i would suggest you try clean it without soap or get some Nerta and give it a go???
+Nerta Queensland I've had my 4wd 100% more covered with mud than that and generally just using a gerny gets it 100% off. just my experience
Active Diamond solves all types of dirt on that are present on the car - not only mud. This includes bird shit, soot, insects, etc. GRtz
Dont knock the product until you try it.
Nerta ( Entaco Belgium ) makes very solid products that work (!). They are all different from the standard foams and consumer products on the market. As you mentioned : don't knock the product until you tried it. Cheers.
work hard👎🏻👎🏻👎🏻
Top to bottom. Thumbs down
El Chapo Touchless washing works bottom to top.