For example, if you've rolled the spline into the left channel, then you've done the bottom, and now you're rolling the right channel, look at the mesh on the left side near the spline and see if it's lifted. If so, pull the mesh a little when rolling the right side, careful not to pull to much because it can warp window frames if that's what you're doing.
Thanks heaps for explaining properly ❤
You’re welcome
Thanks for uploading this. Wasnt sure if I needed to take the flyscreen door off to replace the mesh
No problem
Can replace without the need to take door off
Great video!! Gonna save me some cash, instead of getting a "professional"
Thanks. It’s very easy to do, enjoy
Thanks! This video helped heaps!
You’re very welcome
Nice job - how easy is it to make sure the wire is taut enough and not too loose??
Thanks. The mesh will tighten nicely when you push the spline into the grooves
For example, if you've rolled the spline into the left channel, then you've done the bottom, and now you're rolling the right channel, look at the mesh on the left side near the spline and see if it's lifted. If so, pull the mesh a little when rolling the right side, careful not to pull to much because it can warp window frames if that's what you're doing.
Makes sense thanks @@HULKHOGAN1