ABS Light Stays On, Pulsating Brake Pedal, Locking Brakes? Check this!
HTML-код
- Опубликовано: 7 сен 2024
- Today we are tackling the ABS issue my Mercedes W124 has been having. I break down how I went through the process of tracking down the issue with you to potentially help you all out!
ABS Light Stays on, Locking brakes, Pulsating Brake Pedal
Check me out on IG: / buildsunited_
I have a website:
AutoMotoNation.com
#BuildsUnited #W124
Disclaimer:
Due to factors beyond the control of Builds United, I cannot guarantee against improper use or unauthorized modifications of this information. Builds United assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Builds United recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Builds United, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Builds United.
Furthermore, the links posted within the description may or may not contain affiliate links. If used, I trully appreciate the support!
That relay just saved me a lot of time. Blown fuse, now starts great and ABS lamp off. Thanks for sharing.
Hi Chris,DO NOT USE COPPER GREASE on slide pins...it will DESTROY the rubber boots!!!
Use SILICONE GREASE or CERAMIC GREASE!
Nice diagnosis! Good work resoldering the joints on the OVP relay, preventing possible future problems. But on this case it would be very unlikely for the OVP to be causing the problem, because although one of its most common failure symptoms is the ABS light turning on and the tachometer stops to work, but it doesn't really affect the function of the ABS, as far as I know.
I was thinking that same thing after I re-tinned the OVP Relay, so I appreciate this comment. Hopefully viewers will see this and help further diagnose whatever issue they may be having.
Thank you for making this video. I am having problem with ABS and ASR warning lights come on when the car start moving forward.
Great video. I have exactly the same issue on my 190e and the pins never crossed my mind. I have already cleaned the sensors, but that somehow made the problem even more intense :D Specifically before cleaning it would jitter just once and turn on the light, but after cleaning it takes more like 5 stops for it to iluminate. Hope this will finally fix my issue. Had the relays pulled out so I dont expierence the jittering after every start :D
Excellent. 👍🏻🏴
Great car. My 1987 300d has over 740000 km. You have lots of driving to go!
As long it it’s maintained, you are right 🙏 planning to get it in nice daily driver shape.
Thank you for making this
Can bad wheel bearing fornbmw 328xi cause this?
How much i can pay u to fix my car plz i have bmw 328xi 2007 i cant get rid of my abs 4x4 pulsating break light plz help
Never had an abs issue with any car i've owned, maybe it's becuase I stick to Toyota/Lexus and some hondas?, have to say it seems very annoying to diagnose.
You may have had very well maintained cars as well. The Tahoe had 2 separate brake related issues. Had an ABS light on for a while and it ended up being an unplugged sensor after diagnosing with a high end scanner. The other was what I stated in the video related to previous mechanics skimping on brake jobs.
My Astro currently has ABS issues related to locking up brakes, and I have yet to fully figure that out. I am replacing the emergency brake cable tomorrow in hopes that is the issue. If it isnt, I will be back to square one and probably replacing the brake master cylinder again.
The Merc was luckily relatively easy after I broke down all the steps.
It can be very annoying haha.