I love your channel and the high tech trim tips. In the future videos, could you explain what you’re doing along the way and why? I understand this channel is probably to highlight your revolutionary products and that part is awesome, just would love more tutorials since you are also a top notch craftsman. If you notice, most brake demonstrations by people like Vanmark and Tapco, they take a short piece of metal, make a corner post for example, and move so fast, sometimes it’s hard to process and it’s not reality. I love your “JUST BEND” product but waiting for the brake to come out hoping it will incorporate all your products in one package, or we can get the brake with an accessory package that has what we need. At this point I’m just using my brake/brakes for personal and volunteer projects for friends, but with your brake/accessories, I would consider doing some for pay. I’m amazed how creative some people are, like you wrapping this post using glue/double sided tape, and with the just-bend, it’s so fast that even me moving slower these days, I could make a showing, lol. Any update on the brake?
thank you for your comment Jerry, I will try and do more talking on the future posts, the brake is scheduled for early 2022, just like everything else it seems there has been delays with supplies which delayed the R&D but we are getting there and taking the necessary steps to product development. We will offer our different brake models in a ''bare'' version (with no accessories) and a fully loaded version (with all our accessories) and every other option in between! we are eager to get that going!
Excellent travail! Y a-t-il de la formation qui se donne dans la région d'Ottawa? Si oui, je la prendrais après quoi j'achèterai une de vos plieuses. Endore une fois, très beau travail.
merci! non malheureusement je ne donne pas de formation comme tel. Qu'aviez-vous en tête côté type de formation que vous recherchiez? je suis toujours disponible pour aider si jamais il y a des questions spécifiques et j'essaie d'ajouter de plus en plus de vidéos en ligne de différentes pièces et morceaux de pliage pour montrer comment je procède. Si ya quoi que ce soit nous vous gênez pas de m'appeller; 613-978-2637 merci!
Watch at the 3min30secs mark and the 6min40secs mark, just 2 pieces latching over and then the L trims with double bends getting glued on on all 4 corners!
What kind of tapco brake is this? I’m planning to buy a hd tapco pro thinking it will bend thicker metal without damaging the brake. I have a tapco pro 19 but it got damaged when I tried to bend a thick Metal.
Hi Maynor, this is a MAX XL , if you're willing to wait a few months we'll be starting to sell our new modular brakes (with a heavy duty model) shipping out at the end of spring/early summer. They should be up for presale on our website at 25% off next week! May i ask what damaged on your pro19 and what material and thickness you were trying to bend?
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
That was a pretty intricate capping job. Gave me a few new ideas to try out down the road.
Always love using different methods to create different end results!!
Very nice detailed job..Hard to find guys like us these days..Keep it up.
Great job dude!! I’ve never done the corner trims like that but I will in the future!
I love your channel and the high tech trim tips. In the future videos, could you explain what you’re doing along the way and why? I understand this channel is probably to highlight your revolutionary products and that part is awesome, just would love more tutorials since you are also a top notch craftsman. If you notice, most brake demonstrations by people like Vanmark and Tapco, they take a short piece of metal, make a corner post for example, and move so fast, sometimes it’s hard to process and it’s not reality. I love your “JUST BEND” product but waiting for the brake to come out hoping it will incorporate all your products in one package, or we can get the brake with an accessory package that has what we need.
At this point I’m just using my brake/brakes for personal and volunteer projects for friends, but with your brake/accessories, I would consider doing some for pay.
I’m amazed how creative some people are, like you wrapping this post using glue/double sided tape, and with the just-bend, it’s so fast that even me moving slower these days, I could make a showing, lol. Any update on the brake?
thank you for your comment Jerry,
I will try and do more talking on the future posts, the brake is scheduled for early 2022, just like everything else it seems there has been delays with supplies which delayed the R&D but we are getting there and taking the necessary steps to product development. We will offer our different brake models in a ''bare'' version (with no accessories) and a fully loaded version (with all our accessories) and every other option in between! we are eager to get that going!
That's a great job ...this is how I wrap now!
Awesome!:)
I like that.. esp how you did the top and bottom pieces
Thanks!:)
Boss. Super innovative ideas. Love it
Thanks!:)
Skills friend!!!
Thank you!
What king of glue you using my friend
Good morning Jorge, we use mainly Mulco Supra here i Canada.
Nice job bro
Super clean, I like it. Any issues ever arise with the tape?
You mean with the 2-way tape?! It's only there to hold in place until the caulking cures!
Was that double sided sticky tape? I like that idea
Yes! Use it often instead of screws or nails! It's double sided tape for window glazing
That’s what the F I’m talking about. Excellence .
Excellent travail! Y a-t-il de la formation qui se donne dans la région d'Ottawa? Si oui, je la prendrais après quoi j'achèterai une de vos plieuses. Endore une fois, très beau travail.
merci! non malheureusement je ne donne pas de formation comme tel. Qu'aviez-vous en tête côté type de formation que vous recherchiez? je suis toujours disponible pour aider si jamais il y a des questions spécifiques et j'essaie d'ajouter de plus en plus de vidéos en ligne de différentes pièces et morceaux de pliage pour montrer comment je procède. Si ya quoi que ce soit nous vous gênez pas de m'appeller; 613-978-2637
merci!
Very nice!
Does this video have sound? Because of the shadow and dark metal I cannot tell how this joints or makes a seam.
No it does not, that's the whole goal to not see any seam;) which seam are you looking for? Which part?
Vertically on the column.
@@BorderPapswatch the video so see how the seam is hidden;)
@@innovatoolsinc I watched it about 10x. Does it just sit flush? Does it lock in somehow?
Watch at the 3min30secs mark and the 6min40secs mark, just 2 pieces latching over and then the L trims with double bends getting glued on on all 4 corners!
did yo prefer work on taco or van mark? and why? nice video Alex
I personally dont mind either or! They both do what they are intended to do!
What kind of tapco brake is this? I’m planning to buy a hd tapco pro thinking it will bend thicker metal without damaging the brake. I have a tapco pro 19 but it got damaged when I tried to bend a thick Metal.
Hi Maynor, this is a MAX XL , if you're willing to wait a few months we'll be starting to sell our new modular brakes (with a heavy duty model) shipping out at the end of spring/early summer. They should be up for presale on our website at 25% off next week!
May i ask what damaged on your pro19 and what material and thickness you were trying to bend?
Check out a aluma brake..Makes everything easier.
The constant cutting with a knife when you guys sell a cutter, it makes my head hurt.
I think this was shot just as we were launching our 2-way cutter!😊
You couldn't of 1 peiced it
What do you mean?