Straight forward instructions for soldering a new charging port. Thank you for keeping it simple and pointing out the difficult part on soldering the micro pins to mother board.
This is a fantastic video, Thanks. I've been needing a new phone, as my Galaxy-Prime is out of date now (over seven years old), and this video has convinced me to bite the bullet and get a new phone. I'm pretty handy with repairs, but this looks like it would be pretty difficult for me to do. Thanks again for such a good tutorial.
I wish this had shown instead of some other videos. You explain why to do something and technique that others dont show or talk about. I replaced the screen on my j7 and now it won't turn on. It also has a charging port problem. I will look and see if you have videos about that but I wanted to say best video I have seen on the subject. Nobody else talked about the little prongs or the little wires. The just did the 4 big ones and that was it. Thanks again.
Thank you so much sir for giving us all the knowledge for repairing charging pin. Especially like me im just new in phone repair. I reall want to be a good in androin phone repair. By the way. Its june 5 2020 Watching from philippines.
Excelent cideo. Very informative with great visual showing and verbal explanation. I have a Samsung Galaxy Core Prime that has a charging port that needs to be replace, which as the charging port on my phone and the phone you used are the same, this video will help me in replacing mine.
Nice video! Novice question: After having essentially ripped the two halves apart without heating the glue, would it not be a good idea to heat the glue after re-assembly to make it settle back to its original bonding position/strength and perhaps re-tighten the screws a bit as it settles? -- It just seems a little too easy! ;-]
Hello! :) Thank you for taking the time out to teach us all! haha We have a question for you! What temperature on the heat gun and solder iron? Also, what's the air flow number on the heat gun?
I've seen people doing similar job but using the air station instead. They'd put the new solder in, then put the replace part on top, and then use the air station to melt the solder and fixate the part. Do you think that method would work on this?
@@iSmart1 I see.. That's a fair point. But I'm pretty bad with the iron, so I'm scared to damage the motherboard with it. What if I protect the insides with foiled tape? Would that protect it?
Why? If the mic was installed by hot air, then it can take it directly for a time... why protect it from a possible minor side blast now? It will not de-solder unless the heat is sustained. And he's using a very narrow nozzle and keeping it in constant motion to avoid that. So, unless you sell capton tape for a living, I don't see a problem. ;-]
i am only able to get one open, i think it could be the Solder flux that is not opening up holes easily. I have the same Solder wic and Solder gun gets very hot
Micro soldering is so sensitive- I’m not sure I could pull this through. Chargie USB stick is a sure solution as it removes charge port risk and prolongs battery life.
Straight forward instructions for soldering a new charging port. Thank you for keeping it simple and pointing out the difficult part on soldering the micro pins to mother board.
This is a fantastic video, Thanks. I've been needing a new phone, as my Galaxy-Prime is out of date now (over seven years old), and this video has convinced me to bite the bullet and get a new phone. I'm pretty handy with repairs, but this looks like it would be pretty difficult for me to do. Thanks again for such a good tutorial.
Very clear sound and nice explanation
You have explained it beautifully bro.. Thanks!!
Really good I need more your videos
I wish this had shown instead of some other videos. You explain why to do something and technique that others dont show or talk about. I replaced the screen on my j7 and now it won't turn on. It also has a charging port problem. I will look and see if you have videos about that but I wanted to say best video I have seen on the subject. Nobody else talked about the little prongs or the little wires. The just did the 4 big ones and that was it. Thanks again.
Thank you so much sir for giving us all the knowledge for repairing charging pin.
Especially like me im just new in phone repair. I reall want to be a good in androin phone repair. By the way. Its june 5 2020
Watching from philippines.
A very simple and clear explanation. Thanks bro👍
Very great explanation and nice video
I do like what I see and hear. Definitely well explained which will
make my work much easier. Great video!
a very easy to follow guide. Brilliant, clear explanations. Thank you very much Sir!
Pls can u add heat to allow the gum melt and be firm again
Oh I love it,nicely English I understood.show me next time how to program cellphones.thank you.
Salute to the person who struggle evryday to grow
Mobie phone good rimoe and good installetion charging jack super
Excelent cideo. Very informative with great visual showing and verbal explanation. I have a Samsung Galaxy Core Prime that has a charging port that needs to be replace, which as the charging port on my phone and the phone you used are the same, this video will help me in replacing mine.
BARAKA ALLAHO FIK
Thanx bro.. u did a great job. that was a very clear explanation 👍
GREAT EXPLANATION AND SHOW..THANKS
wow..your the best in phone repair demonstration :D I learned a lot. Wish to see more videos from u...Thank you. God Bless u :D
nice nice video
Nice video
Damn this guy is the best. Subscribed ALL (9.84K Subscribers as of now - 1/29/2020 @ 11:57PM PST)
Good job
Nise
Nice teaching bro
Muy bueno la enseñanza, un saludo desde Peru.
excellent video
Super nice sir
Great explaination sir
Thanks for sharing..Good job 👍
Very nice sir
Nice ripeing
Great sir
Super
Great video nice and neat, thank you once again.
amazing video
you real smart Good idia
I hope this was like ... the best tutorial.
wow so nice
Wow
m3allam
Nice video!
Novice question: After having essentially ripped the two halves apart without heating the glue, would it not be a good idea to heat the glue after re-assembly to make it settle back to its original bonding position/strength and perhaps re-tighten the screws a bit as it settles? -- It just seems a little too easy! ;-]
thank you very much its good explanation
عمل جد متقن و دقيق شكرا لك
Keep doing great!
Perfect guide.
Thanku so much.
Hello! :) Thank you for taking the time out to teach us all! haha
We have a question for you!
What temperature on the heat gun and solder iron?
Also, what's the air flow number on the heat gun?
It depends on what heath gun are you using. I putted nine on the highest. Make sure you are not burning your motherboard.
Great video what heat gun would you recommend
Rework Soldering station 862D+
Sir super
you´ve tached me some important stuffs
surander
Wonderful demo! Thank you Sir
can i use liquid tin on the charging port pins to solder them?
what temp on the air gun did you used?
Hey please help me, what the perfect temp to use
Great lecture, thanks
I've seen people doing similar job but using the air station instead. They'd put the new solder in, then put the replace part on top, and then use the air station to melt the solder and fixate the part. Do you think that method would work on this?
yes, it's possible just the air station will melt the plastic inside the charging port that's why I prefer to do it manually.
@@iSmart1 I see.. That's a fair point. But I'm pretty bad with the iron, so I'm scared to damage the motherboard with it. What if I protect the insides with foiled tape? Would that protect it?
What is the name of the 2 device you put on the charger port before you heat it with sodeing iron..
mast video
Hi! How hot must the soldering iron be? Thanks :)
Approximately how much can I spend on those equipment. I already have soldering iron by the way. I'm based in South Africa
Around $100 with the soldering station.
Thank u for the tutorial 👍
EXCELLENT VIDEO
Hi sir what do you called that charging port so i can order on amazon,i have same problem on my phone.i hope you can answer and help me.thanks
Good work but sorry you should protect the mic from the hot air first!!
Why? If the mic was installed by hot air, then it can take it directly for a time... why protect it from a possible minor side blast now? It will not de-solder unless the heat is sustained. And he's using a very narrow nozzle and keeping it in constant motion to avoid that. So, unless you sell capton tape for a living, I don't see a problem. ;-]
so nice
i am only able to get one open, i think it could be the Solder flux that is not opening up holes easily. I have the same Solder wic and Solder gun gets very hot
Apply the flux first and add mor solder then remove it with the solder wick
I still do not understand
What kind of Solder flux are you using? Brand?
Micro soldering is so sensitive- I’m not sure I could pull this through. Chargie USB stick is a sure solution as it removes charge port risk and prolongs battery life.
Is it possible to remove the old port without a heat gun but using a 450°C soldering gun?
same question i have. I would think the heat gun would ruin other parts.
It's possible but I don't recommend it at all
How Can get fer solder plz
Good jab
Have u ever try change 'type b' for 'type c'?
No
why my techno povior 3 air have slow charging nowadays and charging light deem deem, what could be the solution
Do you have part number for USB port?
sorry, no.
you can just search it on eBay
charging port for Samsung + the model number of your phone
super
Thanks alot
دمت گرم
is my phone's charging port broken if I can still charge but cant connect to computer or transfer files?
Nice. What temperature on heat gun. And solder iron.?
Charging jaha hota hai baha print hi Nahi hai to Kya kare
هل هذا آمن للهاتف و أقدر أعمله لوحدي في أقدر أعمل كل دا في المنزل؟
How to disassemble ICE in android phone
If charging port changing doesnt work....what is to be done...please
If the pins on the changing port not soldered 100% perfectly it will not charge, you need to be 100% precise.
thanks
Thanks
Thank you
how much cost to change port for grand prime i have problem with my port
The part itself is cheap but a technician will charge around $40
And what kind of charging port is compatible for samsung galaxy grand prime to order on amazon?thanks.
thank you
Thanks a lot.
I ripped the bottom half of the motherboard off from.the top part is this fixable
What this full name alcohol
Any alcohol 90° or up will work.
Do you have an email to contact you thanks
How to remove port without heat gun?
It's possible but not easy
Sir i am technition sir
thank you so much
y
hey, wash maghribi
صحيح
great, I just guessed that from the accent, great English though I like it keep up the good work,
Hi i have same problem on my samsung galaxy grand prime,the charging port.but how can i order what is the name of the port.what it is called?
Just search for it on www.ebay.com
Charging port for Samsung galaxy grand prime
Poda kirukku
Nice video
Thank you