xTOOLM1 Jewelry Tutorial : Fast & Easy Laser Cut Wood Decoupage
HTML-код
- Опубликовано: 5 фев 2025
- This easy xTOOLM1 jewelry tutorial shows you how to make wood decoupage designs fast using a laser cutter! It is part of my laser cutting for beginners series.
See my playlist for more : tinyurl.com/bd...
Subscribe to @beadinggem for more jewelry making tutorials
TOOLS & SUPPLIES (Affiliate Links) :
xTOOLM1 10W Diode Laser Blade Cutter : tinyurl.com/3a...
xTOOLM1 Riser Base and Honeycomb : tinyurl.com/z5c...
xTOOLM1 Air Assist : tinyurl.com/2p...
3mm or 1/8 inch basswood : amzn.to/42VdgLA
Hand sander for wood : amzn.to/3Qff2C8
SVG Files : tidd.ly/3xT2km2
Origami Paper : amzn.to/3LUY09X
Saman Water Based Wood Stain : amzn.to/44dp8Jt
Saman Water Based Varnish : amzn.to/4b8fZnC
(If not available, try out other water based products)
Mod Podge (Matte) : amzn.to/3FcIEdl
Brilliant Resin : tinyurl.com/4h... (Use BG1516 for 15% off)
Mod Podge Dimensional Magic : amzn.to/3U7Bpug
Furniture Repair Markers : amzn.to/3QeNJs4
Xacto Knife : amzn.to/46GAXru
More tutorials, tips and inspiration on : www.beadinggem...
Subscribe for free daily or weekly newsletters!
Note : I do receive a small fee for any products purchased through affiliate links. This goes towards the support of this channel and to provide resource information to viewers. The opinions expressed are solely my own. They would be the same whether or not I receive any compensation.
Great info! Thanks for the tutorial.
Great tips. Thank you for sharing these.
Glad you like them! Enjoy making your own!
Great info thanks. I just got an M1 ultra. I want to do everything at once. Will cardstock work also? I have a ton.
Yes. Use the card stock setting for your M1Ultra. You will need to seal well the results if you are making it into jewelry. Seal first before you add resin if that is the final layer you want.
I just realized you meant gluing card stock onto wood. It should work as card stock is so thin. However, do an experiment first to see if you need to adjust the laser cutting settings. You will need to color the edges of the final pieces as the white of the card stock will likely show.
Thank you
Muito muito muito incrível esta de parabéns gênio
incredible!! Doesn't paper burn? Could you share the parameters you use on the M1? Congratulations for the nice work. I'm from Spain and I make crafts with epoxy resin and now with the M1 too.
The paper is combined with the wood so together, they will not burn. The laser is so fine that it will only cut through where your cut lines are. I was using basswood so I used the M1 reference settings for 3 mm basswood which is 100% power and 5 mm/sec. The origami paper is so thin that the settings still work.
@@beadinggem Wonderful!! I have to try it!! Soon I want to buy the air assistant and the base riser with honeycomb panel. Thank you so much for sharing it!!
@patriciaarbulopatri BTW My current setting on the M1 for 3 mm basswood is 100% power and 4 mm/sec.