because pour molds require more silicone than brush on molds i'd like to reduce my cost as much as possible. I'll build a custom shaped box but what is the minimum distance from around the sculpture that i should build my box? half an inch?
I Foundation it on smooth on. But i Think it ain't in use any ore, and are there clay with a starter package? Or Can some1 give mé a link to a starter package, pourable, with everything i need?
I have designed a mold for a 2.5mm thick walled RTV silicone part and used 3d-printing to produce it. I need tips on ways to reduce friction and properly vent this mold as the part always comes out with large bubbles where the silicone failed to expel the air pockets.
okay i am going to buy this dickblick com/products/smooth-on-starter-kits/ because smooth on does not ship to Denmark. but is thoose pins you set in to make the things to make the 2 half sit toghter, are they included?
On the Smooth-On website, there are calculators to estimate the amount of rubber or plastic you will need: smooth-on [dot] com/tools.php Also, feel free to call or email us with the specifics of your project to get a better estimate.
@sirlazer1 They are not included but are available at most home DIY centers. You can purchase materials directly from: Amsterdam Foundry Facilities Levantkade 271 1019 MH Amsterdam The Netherlands Tel: 31-20-418-2105 Fax: 31-20-418-0385
![Eminem - Fuel (feat. JID) [Official Lyric Video]](http://i.ytimg.com/vi/t5H_CewqpKA/mqdefault.jpg)
because pour molds require more silicone than brush on molds i'd like to reduce my cost as much as possible. I'll build a custom shaped box but what is the minimum distance from around the sculpture that i should build my box? half an inch?
what could be a household diy version of the release agent spray? can you use cooking oil in a mist bottle?
No, cooking oil would not be suitable. Vaseline thinned with mineral spirits can be used.
@@smoothon i ended up using 1 part alcohol (hand gel) & 2 parts dish soap, worked a treat :)
I Foundation it on smooth on. But i Think it ain't in use any ore, and are there clay with a starter package? Or Can some1 give mé a link to a starter package, pourable, with everything i need?
I have designed a mold for a 2.5mm thick walled RTV silicone part and used 3d-printing to produce it. I need tips on ways to reduce friction and properly vent this mold as the part always comes out with large bubbles where the silicone failed to expel the air pockets.
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
@@smoothon Thanks I figured it out in the end though. Filling from the bottom upwards fixed the issue.
Oh that's great! Glad to hear it!
We recommend 3/8" minimum wall thickness for most applications.
Looking to purchase an adjustable mold box like you showed in the video. Any ideas where I can get one? Thanks.
We actually built this box. Instructions are here: ruclips.net/video/R7IDtwjAPac/видео.html
Awesome! Thank you
okay i am going to buy this dickblick com/products/smooth-on-starter-kits/ because smooth on does not ship to Denmark. but is thoose pins you set in to make the things to make the 2 half sit toghter, are they included?
but do they ship to Denmark?
Yes, you can pigment any Smooth-On silicone rubber using Silc-Pig silicone pigments, available at our website.
hi there i want to make a mould of a silicone product using a silicone mould. is this possible??tia
Absolutely - use our Ease Release 200 to release silicone from silicone.
Smooth-On thanks
On the Smooth-On website, there are calculators to estimate the amount of rubber or plastic you will need: smooth-on [dot] com/tools.php Also, feel free to call or email us with the specifics of your project to get a better estimate.
@sirlazer1 They do.
This guy sounds like a GPS.
@sirlazer1 They are not included but are available at most home DIY centers. You can purchase materials directly from: Amsterdam Foundry Facilities Levantkade 271 1019 MH Amsterdam The Netherlands
Tel: 31-20-418-2105 Fax: 31-20-418-0385
im looking to do a project on the scale of a car hood, what would be the cost of my expiriment to make it a success?
shyboy2cute 7 years on, did you end up doing it??