Suzuki RM125 Clutch Basket Repair with Friction Discs and Steel Plates Replacement

2000 Suzuki RM125 Clutch Basket Repair with Friction Discs and Steel Plates Replacement
Easy and quick way to repair your clutch basket in a 2000 Suzuki RM 125 dirt bike. Also replaced and exchanged the clutch friction discs and steel plates by Tusk.
tusk clutch kit installation, friction plates, friction discs, steel plates, steel discs, clutch basket, clutch basket repair, grinded clutch basket, worn out clutch basket, clutch slipping, clutch is slipping, clutch is slipping how to fix, clutch is skipping, 2000 suzuki rm125, 2000 suzuki rm 125, how to, dirt bike, motorcycle clutch, friction plates transmission, tusk, tusk friction plates, tusk steel plates, clutch, clutch slipping motorcycle, worn down clutch basket
2000 Suzuki RM125 Clutch Basket Repair with Friction Discs and Steel Plates Replacement

[@GamerGavin04]

Cant wait to take mine apart and see whats going on with my clutch. Jerks real bad when taking off sometimes, almost like its going on & off repeatedly for a second before going, and sometimes when clutch fully pulled while In gear it slowly moves forward. Just got the bike last year as a small project and going through lots of parts like this to make it perform and look like a new bike again.

[@Kevin_Barricklifts]

Just bought one doing the same exact thing, let me know if ya figure it out 🤙

[@TheRealSkeptyk]

Hopefully this helped!

[@TheRealSkeptyk]

Hopefully this helped!

[@GamerGavin04]

@@Kevin_Barricklifts I actually looked up some more things and found out that I needed my clutch lever to have a little more play before actually disengaging. I had it a tiny bit too tight and loosening it more made it perfect now. Hopefully thats what your issue is too.

[@werdevo6]

Lol, just did my son’s KX125 with Tusk clutch disks backwards, also. Will rework ASAP and run them counter clockwise.

[@TheRealSkeptyk]

Absolutely, basically feels like a brand new clutch was installed.

[@andyhoms2001]

Thanks for the help doing this.

[@TheRealSkeptyk]

Glad to help

[@tomasvinkler6476]

How long that will last ? i have done mine too but on milling machine with divider head.

[@TheRealSkeptyk]

Mines still working, its been almost 2 years...

[@TheRealCozy]

My 97 rm125 clutch hub/basket 30mm bolt will not come loose at all. I’ve been at it for 2 days now not trying to strip it attempting to get to my water pump seals and bearings. Any tips. As to mine is not as loose as yours was 😂

[@TheRealSkeptyk]

My go to is "PB Blaster Penetrant Rust Remover"
You can even get it at Walmart.... spray all around... and alot to make sure it gets in the nooks and crannys of the the threads.

[@crf80fdarkdays]

Atf fluid and diesel mix is the best penetrant, you might find it easier to use a rattle gun especially on a bolt that size.

[@natevogelsang1775]

What year is this bike

[@TheRealSkeptyk]

2000

[@VitruviunMan]

Bro he literally says the year in the first sentence of the video

[@nickhendershot6878]

Did it work

[@TheRealSkeptyk]

of course! smooth clutch release, very happy I saved on the extra $$$.

[@evansallee7548]

@@TheRealSkeptyk where can i can find both the basket and plates?

[@JorgeMartinez-dl7qy]

Thank you!

[@JorgeMartinez-dl7qy]

Hi. link to buy that kit, please.Greetings from Uruguay

[@JorgeMartinez-dl7qy]

or link of the complete kit with springs

[@petr5363]

Thank you!

[@TheRealSkeptyk]

Appreciate the like