Bro your walk around is on point ❤love the build I switched to fi I had 2 zvx 18s on 2 smart 3s loved it time for more power tho I want a 4500rms sub 2 18s 1998 mitsubishi eclipse
SYSTEM SUPER DOPE!!!! UNTILE THE BACK SEAT I WOULDA JUST LEFT THE BOX OUT OF THE TRUCK UNTIL I WAS ALL DONE BUT BIG PROPS TO YOU FOR DOING YOUR OWN WORK THAT TRUCK SO CLEAN
@@SleepyBoiii ppl don't know the countless hours that go into a clean build I got redo my set up it's but thanks for the inspiration I'm trying not to quit got my boxes in and wired on to the next parts.
Port is 5 inches away from the lift gate, width of my port is 6in. Most people recommend it to be the width of the port. So i think its fine. Appreciate it though bro ! 💯🔥
If you wanna be precise about it, if you extend your port walls all the way to the trunk wall or whatever its close to, and measue the area of that nonexsistant "strip", it should be equal to the port area. Basically since the air can flow in all directions once it exits the port, you want that area to be atleast equal to the ports area. So in this case, 5in away from the back would be plenty.
New subscriber! I have a 2011 Tahoe. Are you running a second battery under the hood? I want to do a lithium battery in the back straight off the alternator.
Very impressive! I'm gonna be doing my Big 4 runs soon, just haven't been confident enough to do it myself but a shop wants to charge me over $300 do it. IMO that's craziness.
How did you sound deadener on the back lift door? I need to do the same .mines hits hard and I don't want that rattle. Yours is nice. You got your Tahoe coming out nice. If you could start all over would you still choose this Tahoe. I mean have you seen the new Tahoe. I love the new Chevy Tahoe. But too expensive. That's why I have a 2000 Chevy Tahoe I'm fixing up. Did a ton of things to it. I still have a ton to go.
I took off the panel, & did small cuts to fit in the holes.. i didnt do the whole lift gate due to tight space. But i tried to get the whole lift gate.
You should move to lithium batteries my man. You’d probably make more power. What’s your voltage dropping to? I’m in the process of building my 96ah headway lifepo4 bank for my 4 12 vxf’s build in my Explorer. I’ve got the new jp83 amplifier from D4S going in the back along with the jp23.4 for my mids and highs. The recovery time of lithium is 5 times faster than agm batteries, and not to mention a quarter of the weight. The best part about the headway lithium is that you can run them with your agm’s because they are close to the same resting voltage. Either way, sweet build bro! Can’t wait to take some videos and post them on here once mine is up and running! Bass on 🤘
Yes , i am planning on running lithium next or doing my door panels ? But i think my electrical should be first. It looks pretty easy to do since im a diy typa guy, but i just need to do a little more research & study lithium a bit more so i can do my own bank
I think its around 20 feet or maybe 25, i left extra since i know ima make changes in the future. That way i dont have to rerun my wires again. I have extra
Cool. Similar to my setup. Q: U said each of the 4 subs have their own amp I think, but you have only 2 sub amps right? I used 1 bass 8k per 15" sub. Fi Neo 4.11 street class setup doing 55s (dB). Hope you run your 8K grounds directly to batteries.
I have a 3/4 drop from belltech, but with all this weight from car audio, might of dropped a inch or 2. So basically sitting like a 3/5 or a little more
That's a nice build my man I think yours is better than mine and I also have 4 15 but my man what song was that you played at the 609 mark it was by Etta James I believe but what's the name of the song
I didn't see what your voltage was holding at and do you have external regulation on your voltage coming out the alt mine is a brand x 320 and it's the plug and play for a 12 volt system so can't do anything over 14.4 I have exactly the same set up you do sub wise I'm just running a md8k 2 ohm version wired to 2 ohms at the amp I was wondering if I could run two bass 8ks I have an 80AH underground power lithium bank that I have yet to install but I have had a lot of people tell I don't have enough lithium to run 2 of those amps
@@HardKnocks160s that's not how it works. I'm asking for true RMS. RMS doesn't mean cranking it up to 10,000 watts for 2 seconds. I'm tryna play a whole 10 songs without worrying about blowing them.
@@bailey2517 I know who it's works... sir I have a wall build.. I'd say 2-3k each on music.. for a few songs , 10 mins straight on 10k clamped on music , say 4- 15s would be alittle too much at 40hz U will need to plays some lows to cool them coils off a bit in between songs but yes I'm sure they can handle decent power but big power for straight 10 mins.. ul need to let them cool down I run 5- Skar audio DDX 15s on a Korean 7.5k wired to .4 only rising to .9- 1ohm maybe a hair higher on music I clamp over 10k on burps I'm sure I'm clamping around 6-8k on music it's does okay 161.3db 👍
Hey bro, awesome set up! I have a 2006 with a 320 alt, 2 VXF 15’s but only on a Taramps 3K…how’s your voltage when your playing full tilt? Mine drops low 12’s but I only have one battery for now.
I have 2 400 amp alts & 3 d7500s now with a 1 d3400 in the front, i still drop down to 13.6. These taramp amps take up alot of juice lol i have 8ks as well
You done the wire work? If so impressive! I've seen "Car Audio Shops" you would put to shame from your wire runs. This imo is how a audio system should be run!
@@SleepyBoiii yep, I'm an 51yr old man that feels like 81 but, been into car audio since about 20yrs old. I've worked with car audio shops but, never for one. I do things 1 way. Right or not at all. I'm about 3wks from finishing up a redesign in my 08 Yukon Denali. I should of had it done by now. Nothing like yours. I just have 2-18's and 4-3.5 two ways and 4-6.5+1" components all Rockford punch, Skar 18's, 3 batteries, 2 runs of 0ga, big 3, still lack my alt. I'm only running about 5,500rms. Its a daily. Your wiring is exactly the way I do mine. Once its all finished I'm putting it on my channel. Its a firearm channel but, I can't live without bump. Again superb wire work.
@@SleepyBoiii you got it brother!!! Thanks for the sub!!! I'll be dropping some new videos Lord's will this coming Saturday with my AR9 and my AR300bo I just got done with. I have a few suppressors and whats cool about the last can I got, it will run on the 300bo and my AR9 both. Just change the end caps. I just dropped $330 on a QD mount and 2 muzzel breaks for the two AR'S. I was hoping to shoot yesterday but my ammo didn't come in. I'm doing a video where I shoot unsuppressed, then suppressor with regular ammo, then suppressor with subsonic ammo. I will be doing that on both AR'S. I've been waiting 2 months for all this to come together! Thats why my Yukon is still running the same Rockford Fosgate system 2-15"P3's on a Punch 1000d(1425rms) 8.0cuft box tuned to 38hz. Needless to say going with 2-18's and a JP33(4K rms) 10cuft box tuned to 34hz should push more air that whats in their now. I'm just guessing but probably 147-48db right now. Hopefully my new build pushes me over 150db. Sorry for talking your ear off. I live in middle Tennessee. If your ever this way get with me and we'll check out systems and go shooting on me.
On this video my electrical wasnt on point, i now have 2 400 amp alts with 3 d7500s now, also depending on the box as well, this isn't really a spl box. Its more on the SQ side. New system going in pretty soon 👌🏽
I have to throw out some demo videos out there before i sell this system, just cant find a good spot, always getting cops called or getting told to leave the spot 😒
@@SleepyBoiii how big is your box is it big enough for your speakers thinking about running same subs maybe 6 of them or 4 not sure yet I don't want to have to possibly do a wall an what ohm are your speakers since you have the 2 tar amps 8 k's
lookin real good bro. Thanks for choosing SMD fuse holders!!! we all appreciate you here at the shop! :) bass on!
Thank You As Well ! I Appreciate It Bass On 🔊
@@SleepyBoiiihey what midrange speakers you running now
Your wiring is ON POINT. You definitely have some good power going to the amps
Thank you ! Im gonna have to do a update of my system , upgraded on my electrical
I ain’t gunna lie, shit on fire. Love every setup. Keep banging brother.
Thank you 🔥
Sick build my guy..really clean work with the wire management...props.
Thank you 💯💪🏽
Nice 💪🏾 Definitely loud and clear and clean. I like it .Maryland showing ❤
that is a sick build. that mids box would be a sick talegate or tow hitch box. I bet your doors are gonna turn out great
Cant wait ! Big things coming soon 💪🏽
Bro your walk around is on point ❤love the build I switched to fi I had 2 zvx 18s on 2 smart 3s loved it time for more power tho I want a 4500rms sub 2 18s 1998 mitsubishi eclipse
What up bro? Nice to see you here on RUclips! You already know i love your whole car/build lol👏👏👏
Dope a.f. homeboy keep doing your thing man! Love from the 508( Massachusetts)
Bro I got a 300 I’m about to sell for 2 tahoes . I love how yall got the setup done
Killer setup bro . Hella clean wiring
Love your work looks very well 👍👍👍👍✅. Done i like how well you sound deadened the roof,an back half .thanks for posting up bro!!
Nice setup bro. I want to upgrade mines too. But I'm already loud. Love your Tahoe
Thanks man 🔥 Appreciate it 💯
SYSTEM SUPER DOPE!!!! UNTILE THE BACK SEAT I WOULDA JUST LEFT THE BOX OUT OF THE TRUCK UNTIL I WAS ALL DONE BUT BIG PROPS TO YOU FOR DOING YOUR OWN WORK THAT TRUCK SO CLEAN
Yeah man i know it bothers me everyday 😂 but it reminds me to get my doors done ! Thank you man appreciate it 💯
@@SleepyBoiii ppl don't know the countless hours that go into a clean build I got redo my set up it's but thanks for the inspiration I'm trying not to quit got my boxes in and wired on to the next parts.
hopefully il cach you at slam this june
Great job man! I can tell this video dont do the sound justice. Somthing to be proud of.
Appreciate it bro 💯 & yeah she sounds way better in person !
Your wiring layout is super clean bro! Do you think the box port has enough space to breathe once the door is closed?
Port is 5 inches away from the lift gate, width of my port is 6in. Most people recommend it to be the width of the port. So i think its fine. Appreciate it though bro ! 💯🔥
If you wanna be precise about it, if you extend your port walls all the way to the trunk wall or whatever its close to, and measue the area of that nonexsistant "strip", it should be equal to the port area. Basically since the air can flow in all directions once it exits the port, you want that area to be atleast equal to the ports area. So in this case, 5in away from the back would be plenty.
Look great and sounds very clean...Great job.🙂
Thank You!
Very nice! Out in the country too, cant beat that!
Bro! Super clean build! I would love to see a distance test to see how far you can hear that thing 👂🏽 bass too!
Love the build everything is clean amazing work brotha 💯 mad skills
Yeah that’s a nice build I’m looking because I’m about to do three of those and wanted some ideas, that’s a nice build
Damn dude this stuff hits hard
Shit looks super nice
Thank you !
And your system its clean and loud man
Nice tahoe its clean I need to clean up my wiring like yours good work bass on bro👍🔊
Goooood dammmeeed🤯🤯🤯
That's sooo coool👍👍👍😁😁😁
There is no life over fifty Hz🤘🤘🤘🤘
Gahhh danggg man this is the cleanest setup ive ever seen on line.!! Wow 🤩🤩
Appreciate it bro ! 💯🔥🔥💪🏽💪🏽
DAMN. That looks loud as fuck
It is in person bro !
Nice set up bro wish I could here it in person. What horn or those I'm trying to set my doors up.
this is a very nice setup
Nice build bro. Super Clean. Respect from Cleveland, Ohio 216/440 💯💯💯💪👌
Appreciate it bro 💯💪🏽
Nice system bro I liked how you explained everything
I going 4 15s also i have 2 400 mechman a salt 12 dope video
Hey bro did you build and do all the installation yourself? I'd like to something similar I have the same vehicle.
Ive only done the installation , i got my boxes built
@@SleepyBoiii where did you get the wiring done?
@@Theideaman i did my own wiring, the only thing i didnt do was my sub box, center console & the wall .
Very good sound quality. Bass nice and musical.
I appreciate it! She sure does sound good !
Did you say you finna put 8x 15s in there??? Hmm interested to see the outcome.
BTW, awesome, superb wiring
You did a great job mann 👌🏽💯💯
seen you on tiktok and now i wanna drop my yukon
You will love it after you drop it bro 👌🏽💯
💪🏾💪🏾💪🏾
New subscriber! I have a 2011 Tahoe. Are you running a second battery under the hood? I want to do a lithium battery in the back straight off the alternator.
This a clean tahoe man
Thanks man appreciate it ! 💪🏽
Sounds damn good bro 😎
Thanks bro 💯💪🏽
Nice !! But shiii is the subsonic on?
Thats a clean set up bro love it
Thank you bro 💪🏽💯
New to the channel , your audio setup is Lit!!!!
Thank You 💯
Slammin setup man! 😎🤘🏻🤘🏻
Thank you 😎💪🏽
Very impressive! I'm gonna be doing my Big 4 runs soon, just haven't been confident enough to do it myself but a shop wants to charge me over $300 do it. IMO that's craziness.
Whats a big 4? Only heard of a big 3
@@MrGreengiant4200 3 grounds instead of 2. He'll there's Big 5 & 6, don't know if there's more because that's all I've heard of and seen.
I would personally do it myself bro! That way you can have something to look at & be proud of! & also have it the way you want it 🤙🏽
@Sleepy Boiii thanks and your totally correct. I purchased the wire today from Sky High Audio.
How did you sound deadener on the back lift door? I need to do the same .mines hits hard and I don't want that rattle. Yours is nice. You got your Tahoe coming out nice. If you could start all over would you still choose this Tahoe. I mean have you seen the new Tahoe. I love the new Chevy Tahoe. But too expensive. That's why I have a 2000 Chevy Tahoe I'm fixing up. Did a ton of things to it. I still have a ton to go.
I took off the panel, & did small cuts to fit in the holes.. i didnt do the whole lift gate due to tight space. But i tried to get the whole lift gate.
@@SleepyBoiii ok. I'll try the sme because mines shakes like crazy
Good set up solid work. How does it sound outside sealed up?
That would be a pretty cool video to do! Hopefully no windows blow out 🤷🏽♂️
Real nice work 👌
🔴 #DopeAssCarAudioBuild👌🏾, What are your crossover points, where you low pass the subs 100hz, 80hz, 60hz and where you highpass the mids and highs
Rastastep had your subwoofers moving some air. Cool that you used the song I recommended.
Yes sirr ! Other recommended songs ima use for a seperate video, to show the mids and highs
It was for me ..bro
You should move to lithium batteries my man. You’d probably make more power. What’s your voltage dropping to? I’m in the process of building my 96ah headway lifepo4 bank for my 4 12 vxf’s build in my Explorer. I’ve got the new jp83 amplifier from D4S going in the back along with the jp23.4 for my mids and highs. The recovery time of lithium is 5 times faster than agm batteries, and not to mention a quarter of the weight. The best part about the headway lithium is that you can run them with your agm’s because they are close to the same resting voltage. Either way, sweet build bro! Can’t wait to take some videos and post them on here once mine is up and running! Bass on 🤘
Yes , i am planning on running lithium next or doing my door panels ? But i think my electrical should be first. It looks pretty easy to do since im a diy typa guy, but i just need to do a little more research & study lithium a bit more so i can do my own bank
Dope ride and set up
Thanks Bro 💯💪🏽
Whats the lenght of power wire from the front to back battery?
I think its around 20 feet or maybe 25, i left extra since i know ima make changes in the future. That way i dont have to rerun my wires again. I have extra
Beast
Can't I ask how do you know how much battery 🔋
Needed base in amplifier power & devices!!
Thanks 👍
What was that bracket you used to mount the fuse block? Custom made? I have a 2004 Yukon plz help
No fuses between amps and batterys?
Fire build bro! I love my VXF 15's
Thank you !!
Cool. Similar to my setup. Q: U said each of the 4 subs have their own amp I think, but you have only 2 sub amps right? I used 1 bass 8k per 15" sub. Fi Neo 4.11 street class setup doing 55s (dB). Hope you run your 8K grounds directly to batteries.
Each pair gets their own 8k, so 2 15s per amp. & nice bro ! I wonder what my numbers are.. never checked before. But yes i am ⚡️
On my level is a top 3 bass demo song
Nice Bro!!
Thanks 🔥💪🏽
What’s your drop in the back bro ?
I have a 3/4 drop from belltech, but with all this weight from car audio, might of dropped a inch or 2. So basically sitting like a 3/5 or a little more
Clean asf but what’s your opinion on 4 order box I got 2 12”s is it true that they will hit harder
4th order boxes are way better in my opinion but they are right. I had a 4th order in my caddi with 2 12s & that thing would hit ! Even on low power
Nice work bro!
I'm buying one of these what amplifier do you suggest?
Really depends on your electrical bro, but they can take 3k to 5k easy bro. On clean and proper electrical
💯🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
That's a nice build my man I think yours is better than mine and I also have 4 15 but my man what song was that you played at the 609 mark it was by Etta James I believe but what's the name of the song
Thank you ! 💪🏽 will be making a new updated vid of my system soon , & its tennessee whiskey decaf version
Hi bro what was the stuff you put on your tahoe to turn all the your lights on, I mean the high beam, low beam and the fog light
Its the "all lights on module"& thank you man appreciate it !
@@SleepyBoiii you welcome bro
I didn't see what your voltage was holding at and do you have external regulation on your voltage coming out the alt mine is a brand x 320 and it's the plug and play for a 12 volt system so can't do anything over 14.4 I have exactly the same set up you do sub wise I'm just running a md8k 2 ohm version wired to 2 ohms at the amp I was wondering if I could run two bass 8ks I have an 80AH underground power lithium bank that I have yet to install but I have had a lot of people tell I don't have enough lithium to run 2 of those amps
Nice - well worth 5k
Beautiful
Thank you !
Is that Tennessee whiskey song with bass???Where can I find it???
How well do these vxf 15s handle big power?
They handle it really well, they dont even get hot, they can probably handle more! Clean power only though!
how much rms? like if i play a sine wave at 40hz how many watts can it take for 10 minutes.
@@bailey2517 u will blow them .. after 3 mins 😆
@@HardKnocks160s that's not how it works. I'm asking for true RMS. RMS doesn't mean cranking it up to 10,000 watts for 2 seconds. I'm tryna play a whole 10 songs without worrying about blowing them.
@@bailey2517 I know who it's works... sir I have a wall build.. I'd say 2-3k each on music.. for a few songs , 10 mins straight on 10k clamped on music , say 4- 15s would be alittle too much at 40hz U will need to plays some lows to cool them coils off a bit in between songs but yes I'm sure they can handle decent power but big power for straight 10 mins.. ul need to let them cool down I run 5- Skar audio DDX 15s on a Korean 7.5k wired to .4 only rising to .9- 1ohm maybe a hair higher on music I clamp over 10k on burps I'm sure I'm clamping around 6-8k on music it's does okay 161.3db 👍
Nice
Do they run good on 4k a piece?
What sound deadener did u use
Hey bro, awesome set up! I have a 2006 with a 320 alt, 2 VXF 15’s but only on a Taramps 3K…how’s your voltage when your playing full tilt? Mine drops low 12’s but I only have one battery for now.
I have 2 400 amp alts & 3 d7500s now with a 1 d3400 in the front, i still drop down to 13.6. These taramp amps take up alot of juice lol i have 8ks as well
What was the last song and it's version of there is one.. rhx
Why would it need 2 8k's??
You done the wire work? If so impressive! I've seen "Car Audio Shops" you would put to shame from your wire runs. This imo is how a audio system should be run!
Everybody tells me that bro ! I think i did a pretty good job, blood, sweat & tears into this project 🙏🏽 with more to come 🤙🏽💪🏽
@@SleepyBoiii yep, I'm an 51yr old man that feels like 81 but, been into car audio since about 20yrs old. I've worked with car audio shops but, never for one. I do things 1 way. Right or not at all. I'm about 3wks from finishing up a redesign in my 08 Yukon Denali. I should of had it done by now. Nothing like yours. I just have 2-18's and 4-3.5 two ways and 4-6.5+1" components all Rockford punch, Skar 18's, 3 batteries, 2 runs of 0ga, big 3, still lack my alt. I'm only running about 5,500rms. Its a daily. Your wiring is exactly the way I do mine. Once its all finished I'm putting it on my channel. Its a firearm channel but, I can't live without bump. Again superb wire work.
@@tangomantactical awesome ! Just subbed 🫡 Love me some firearms too. Will stay tuned on that build! Thanks again 💯💪🏽
@@SleepyBoiii you got it brother!!! Thanks for the sub!!! I'll be dropping some new videos Lord's will this coming Saturday with my AR9 and my AR300bo I just got done with. I have a few suppressors and whats cool about the last can I got, it will run on the 300bo and my AR9 both. Just change the end caps. I just dropped $330 on a QD mount and 2 muzzel breaks for the two AR'S. I was hoping to shoot yesterday but my ammo didn't come in. I'm doing a video where I shoot unsuppressed, then suppressor with regular ammo, then suppressor with subsonic ammo. I will be doing that on both AR'S. I've been waiting 2 months for all this to come together! Thats why my Yukon is still running the same Rockford Fosgate system 2-15"P3's on a Punch 1000d(1425rms) 8.0cuft box tuned to 38hz. Needless to say going with 2-18's and a JP33(4K rms) 10cuft box tuned to 34hz should push more air that whats in their now. I'm just guessing but probably 147-48db right now. Hopefully my new build pushes me over 150db. Sorry for talking your ear off. I live in middle Tennessee. If your ever this way get with me and we'll check out systems and go shooting on me.
I see you have the Skar vxf . 2hybdid you choose those over the Skar zvx series subs?
VXFs are both SQ & SPL subs
What is the last song?
What are you holding voltage wise when you are demoing
13.8 Most of the times, but when i have some hard bass without reving i drop to 12.6 - 12.8 range
What tool did you match your amps up with?
I have a dd1+
@@SleepyBoiii thanks
400 amp fuses?
hey what shop did you get your box built
Pirate Customs In Tampa,Fl
Why you do sleepy for😅
Wiring is on point. I'll never understand the distortion tho. Sounds like shit on my end.
A phone camera mic will never pick up a loud system, its going to distort the mic always. Its loud and clear in person 👌🏽
Honest question, why would someone want to ride around like this?
Why RUclipsr 251Bailey seems much louder with only 2 zvx 15 on only 4500 watts hmmm something doesn’t add up help me understand
On this video my electrical wasnt on point, i now have 2 400 amp alts with 3 d7500s now, also depending on the box as well, this isn't really a spl box. Its more on the SQ side. New system going in pretty soon 👌🏽
I have to throw out some demo videos out there before i sell this system, just cant find a good spot, always getting cops called or getting told to leave the spot 😒
👍
Whats the last song playing ???
Rastastep
Okay who is the artist that made it to find the song ??
I got it nvm thanks tho
What are you metering
I have no clue
I would like to see y our #
@@SleepyBoiii how big is your box is it big enough for your speakers thinking about running same subs maybe 6 of them or 4 not sure yet I don't want to have to possibly do a wall an what ohm are your speakers since you have the 2 tar amps 8 k's
Do not park this beast in the city of San Francisco.
Very loud
clean af!!!!!!!!
Why not put 1 10 in each door
🔴 #DopeCarAudioBuild👌🏾, What are your crossover points, where you low pass the subs 100hz, 80hz, 60hz and where you highpass the mids and highs