Wow man, it just discovered this problem in my mother’s car. She’s had it for like five or six years we bought it crashed airbag deployed. I bought an airbag got it in today to find out they chopped the cables so this is very informative. I have to buy that clock spring thank you very much, man.❤
Trying to replace clock spring in my 2012 Corolla. I'm having trouble finding the release points, the tabs your pushing, for the air bag. The inside doesn't look exactly like what your showing.
Hi David, at MIN 8:16 you mentioned "make sure you don't turn this here (the part of the gadget that turns)". What happens you if you do move it? I replaced my steering wheel and during the process i notice the connectors were in the down position, so I just put them back up without knowing the correct direction (left or right). Now I have that C1433 code. How does you correct the position assuming the sensor does not need replacement, please?
Hi , i have P/S sign on dashboard i change the power steering angle sensor but the sign still there , steering doesnt move . Any advice ? ( 07 camry hybrid )
I am not 100% sure, but as long as you mark everything, and put everything back the way you suppose to, you may not have to calibrate the angle sensor.
How do you know steering wheel angle sensor was bad? (For example, my turn signals don’t work but when I press my hazard flasher lights the turn signals flash)
I made this video just to show the viewers how to replace it. I am not a mechanic, I have done my best to help someone out there, sorry that this video didn’t help you.
Wow man, it just discovered this problem in my mother’s car. She’s had it for like five or six years we bought it crashed airbag deployed. I bought an airbag got it in today to find out they chopped the cables so this is very informative. I have to buy that clock spring thank you very much, man.❤
Very detail video thanks that will save some money not only me but a lot off us that look for this information like I said very detailed
Thank you for your help! I just saved $300. I did it myself with your help.👍🏾👍🏾
I am glad I helped you
The best video on clock spring/angle sensor replacement!!! Good job!
Good job, my friend, and help me a lot.. thanks 👍
Trying to replace clock spring in my 2012 Corolla. I'm having trouble finding the release points, the tabs your pushing, for the air bag. The inside doesn't look exactly like what your showing.
Will disconnecting the car battery for a long period of time to work on your car, cause the ECU to reset itself while your doing this?
Good job man, straight forward.
You are welcome Man.
Thanks this helped with Scion TC as well
You are welcome.
You saved my ass 500 dollars
I am glad
Hi David, at MIN 8:16 you mentioned "make sure you don't turn this here (the part of the gadget that turns)". What happens you if you do move it? I replaced my steering wheel and during the process i notice the connectors were in the down position, so I just put them back up without knowing the correct direction (left or right). Now I have that C1433 code. How does you correct the position assuming the sensor does not need replacement, please?
Put it back the same way
Do you need to turn the clock spring 5 times and line up the arrows?
I am not sure, all I know is that you have keep it where it is
Thanks my 2014 was different put part inside were the same
I am glad I was able to help.
Much appreciated man
Hi , i have P/S sign on dashboard i change the power steering angle sensor but the sign still there , steering doesnt move . Any advice ?
( 07 camry hybrid )
Yo choqué mi Camry y explotó la bolsa de aire si yo la reemplazo todavía da seguridad la bolsa de aire
Where did you buy sensor
Must remove the battery connect?
Yes
How do you calibrate? Still have the same code after replacing...
you have to use techtream program to calibrate it, there a special procedure of how to do that
I have no codes, but I have to replace the turn signal stalk. Will I need to calibrate my clock spring if I disconnect it?
I am not 100% sure, but as long as you mark everything, and put everything back the way you suppose to, you may not have to calibrate the angle sensor.
How do you know steering wheel angle sensor was bad? (For example, my turn signals don’t work but when I press my hazard flasher lights the turn signals flash)
Sounds like it's just the switch for the blinker. Not the angle sensor, all this does is read the angle of your wheels. Doesn't effect turn signals
Mine just needs to be calibrated took it to the dealer in They said a just needs to be calibrated
I agree, I don't know if I mentioned that, but yes sometimes all it needs is zero calibration, mine needed replacement,.
U didnt explain how to calibrate it
What is the sensor serial number or OEM number for 2013 venza
I am sorry, I don’t know
Buen video
Thank you
You are welcome
Can this also make your car drive funny like it's in a different gear or the over drive is off
I don’t think so.
Where can I take it to be calibrated dealers charging $600
you can buy the computer to calibrate it for less than that.
stealerships are ALWAYS a rip off !
Thankyou
C1425
C1433
C1331
Kamari2011/2012
Cmary
CMARY
He didnt replace it, that is not right.
I made this video just to show the viewers how to replace it. I am not a mechanic, I have done my best to help someone out there, sorry that this video didn’t help you.
Then you follow his steps. And when yu take the old one off, you install your brand spanking new one!
Thank you
You are welcome