Swapping the cab seems like the most sensible option... No messing with drive train angles, rerouting and replumbing fifty miles of lines. PLUS the ease of having off the shelf components, God forbid you find yourself broken down.
I’m doing an extremely similar swap. 66 C10 on top of a 96 Dodge Cummins 3500. My recommendation? Do the c50/c60 swap instead like these folks because that step height at the base of the cab will make up for the different frame mount heights. Mine is coming out way taller and has more frame exposed than I like. I’m looking into if I can add the steps to the cab and change the fender over to make it more like C50/60
if i were there, i would have definitely voted for Aaron's idea of cab swap, way safer and time saving. also Sam is doing the right job wearing PPE! this build's gonna be awesome
Good call on the chassis swap instead of adding all those Ram parts to the C-60 chassis. SO MICH TIME SAVED! And like Aaron said, down the road if something breaks, off the shelf parts are available. Nice job fellas!
You ALL are killing it! I was noticing Sam wearing a respirator, glasses, gloves on, and had his hair tied back almost the whole time! Did he have earplugs in too? He's a keeper!
If you are able to do it, you will want to be up in Alaska in the fall. It is beautiful up here that time of year! It is a crapshoot of when it happens though.
Great job young men 🎉🎉🎉I myself back in the mead 1960's I done the same thing i did engines and transmission swaps in different makes and models together with welder and torch and created amazing builds and enjoyed every moment of LIFE AND ENJOY THE REST OF YOURS AS WELL. BLESS YOU ALL
Like what you are planning on the old chevy truck...as far as the mini Tonka how about make it look like an old kenworth or freightliner cab over and build a custom narrow fifth wheel camper my shop could help with interior on the camper..I see a lot of tiny home why not a tiny camper? Keep up the good work
Btw: that scene from "Spaceballs" at Mr. Rental never gets old! It is so damn hilarious that I wonder how the actors kept their sh*t together through the whole scene... 😂 My god, that movie is sooooooo endlessly quoteable... 😁
This is definitely the best route to go for a vehicle that is intended to be on the road away from home for extended periods of time. Propitiatory/hand made parts suck when you have issues trying to get back on the road.
Miles ahead ! Is the frame long enough ? if so just set the camper on 2 x 4's to level it out ! Running duelies ? Make sure you have mud flaps , it will save your trailer front !
Another one!!! I guess I can just keep saying since I do every Sunday I love your guys videos and what you do! Look forward to seeing next weeks as well!!
Looking good wasn't sure I was gonna like Aaron cutting the firewall to lower the cab, but after seeing it mocked up I like it. Sam as a person who didn't take care of his lungs and is paying for it, kudos for wearing your PPE. Because I didn't, at age 45 I now got asthma and other issues. That 292 I would put on a hotrod site or market place to get some money back. Also the 66 frame might make you some money as well.
I'll be honest originally I thought I were gonna swap the c60 cab to the other chassis but then I realized otherwise ......but definitely that really seems like the best bet to save time and have a newer model everything under the truck ......makes maintenance a lot easier when time goes by
Sam your doing a great job I have seen some car bodies put on 4X4 frames and I think this transformation is going to look like it came from the factory
Cole I got to let you know Aaron is definitely one of your most valued employees and I see that the rest of your employees seem to be doing some great things also I've enjoyed this segment😮😊
Looks good so far . Smart choice on the cab swap . One thing I did on my 1948 Chevy 6400 (same size like yours) is I made the nose flip forward .I open the hood , pull a couple bolts and unplug the electric and the fenders and grill tilt forward . The radiator stays in place . It’s a game changer when you have to work in the engine bay . It was really easy and I don’t have half the resources you have . I was going to use the same front axle you have to 4wd my 81 Dodge Trans-Van camper . I wanted to keep the coil springs . To save on a bunch of fab work I figured out that I could use a couple Ford E-350 radius arms I guess you call them . One mod would be to stretch them a bit then use 2 heim joints to connect them to the axle. Instead of rubber bushings , I’m sure there are polyurethane bushings out there .The bracket that the radius arms bolt into with the 2 bushing sandwich just unbolts from the frame . I think this will you a better ride than the stock short Dodge ones . If you want pics of my forward tilting front end just let me know .
Turn the Tonka into a bouncing lowrider. Curb feelers, spoke rims glitter gold paint job the whole works. Robby Layton would have a blast painting it im sure.
I’m thinking Sam is the cat’s meow. He already has common sense. You can tell he knows what he’s doing. Seems like he has no problem having people show him what’s up. The biggest thing is he got all that and he still young!!! He’s going places in life. That’s about the most love I can show boy. He’s got going on. Just don’t get stupid Sam.
I would much rather have the modern drivetrain, brakes, steering and everything it comes with. You won’t have to change the entire electrical system. I agree with Aaron. 😊
I wonder how many purists will have an issue with the partial frame swap, it definitely makes sense, especially with the engine and trans upgrade which will need brakes upgrading to match. I think Sam has been great from the beginning! The new press brake looks like a mighty beast in the background! 💪👍
I have done a few of these style swaps, the thing on the C60 is that it was designed for the motor to sit further down, when you swap it onto a pickup frame, the frame horns bend up and lift the engine higher. IMHO not the best setup because it creates the space issue that you are now facing, personally I would have stuck with the original frame and swapped everything over to it as then the engine could have sat further down under the cab, the stock ride height could have been retained, and then you have the option of either a 4 link or mounting a 4x4 front axle on the stock leafs, although that will lift it significantly if you do. But that is why you run into the clearance issues with the floor and firewall.
Cab swap seems the best choice here. A part of me wishes you went with a ford frame, but even as a Ford guy i admit the cummins beats the powerstroke every time
I do understand why you decided to do the cab swap onto the newer dodge chassis. Due to my location and registration/emissions requirements, I would have done the dodge drivetrain into the c60 chassis. Either way its gonna be SWEET!
Hector is going to be running 3 Honda Civics with spoon engines. And on top of that, he just went into Harry's, and he ordered 3 T66 turbos, with NOS.. We are going to have to k24 swap the mini Truck..😂😂😂
l almost bought a 67' camaro in the late 70's that the straight 6 and 2 speed power glide in the center console. The car was low miles and minty fresh when l drove it and lve always regretted not buying it. lt was plenty fast and as fun to drive as the 69 SS/RS 396 4 speed l wound up with.
Very interested in this as im sitting on my 1947 one ton dually Dodge project thinking of the same cab swap idea. Wondering what the width is on the 2013 Dodge frame rails, as ‘47 gets s tad narrow. I suspect ill cut the firewall to match the modern stuff. Props to you all, going to be awesome 🙌 also edited to say smart working Sam good on you.
I didn’t even know that Chevrolet put that small of a motor in the C60. I thought that the most common engine in those trucks was the 366 Big block 6 liter V8.
Had you not done the cab swap, I would have suggested that before you went any further. You now have 1960s GMC vin with a 2013 Dodge drivetrain, suspension, brakes, electrical system and chassis with parts and servicing availability at stellantis . The only thing that says GMC is the cab.
Such a nice old survivor cab and chassis, you are a Blessed Man Living a good Life. I can almost see the Alaskan Landscape now. Are we there yet? 😂Are we there yet? You are Lucky to have MeatBall / PitBull & Tthe Young Blood on the Team, it’s Great for You but He Truly is the Real Winner. I’m confident He will Reflect Upon these Day’s , as The Best Day’s of His Expression😮, Speculation of Course.
PLEASE, PLEASE PLEASE more video on the c-60 swap. Fantastic project, loving every minute of it. Keep up the good work!
Swapping the cab seems like the most sensible option... No messing with drive train angles, rerouting and replumbing fifty miles of lines. PLUS the ease of having off the shelf components, God forbid you find yourself broken down.
100% the best route
Agreed 👍
I’m doing an extremely similar swap. 66 C10 on top of a 96 Dodge Cummins 3500. My recommendation? Do the c50/c60 swap instead like these folks because that step height at the base of the cab will make up for the different frame mount heights. Mine is coming out way taller and has more frame exposed than I like. I’m looking into if I can add the steps to the cab and change the fender over to make it more like C50/60
@bloodredhornet2704 what did you do differently than these guys? Where does one find Cummins chassis?
This swap is looking good. Sam is staying safe smart kid.
Sam is a smart kid
Videos are improving also. More consistent storytelling and better flow makes more enjoyable videos. Thumbs up to everyone 👍
Thanks for watching!!
if i were there, i would have definitely voted for Aaron's idea of cab swap, way safer and time saving. also Sam is doing the right job wearing PPE! this build's gonna be awesome
Thanks for watching!! I think we are headed in the right direction
you guys make my sunday better, and yes, it gonna be one of the coolest builds! @@BASIN_NATION
Good call on the chassis swap instead of adding all those Ram parts to the C-60 chassis. SO MICH TIME SAVED! And like Aaron said, down the road if something breaks, off the shelf parts are available. Nice job fellas!
Very true!
All your projects and builds are the best and Aaron is the best fabricator out there by far and his team are learning alot from him keep em coming
We are all doing our best to entertain. We hope you enjoy every week
Good call for swapping the cab ,its meant to be, great work guys!
I think so too! Thanks for watching
You ALL are killing it! I was noticing Sam wearing a respirator, glasses, gloves on, and had his hair tied back almost the whole time! Did he have earplugs in too? He's a keeper!
Keeper for sure! Sam kills it
thats so much work wow
If you are able to do it, you will want to be up in Alaska in the fall. It is beautiful up here that time of year! It is a crapshoot of when it happens though.
Great job young men 🎉🎉🎉I myself back in the mead 1960's I done the same thing i did engines and transmission swaps in different makes and models together with welder and torch and created amazing builds and enjoyed every moment of LIFE AND ENJOY THE REST OF YOURS AS WELL. BLESS YOU ALL
This is going to look so awesome when its done 😀
You should swap a Cat diesel into the bed of the Tonka truck. Make it a 4x4 monster truck with 5 ton axles
It needs to be a monster truck
Look at that bright sea foam teal green original
Love these old builds
Thanks for watching!! More coming
I love Alaska, ill eventually move back up there. Careful if you go you may never wanna come back.
Like what you are planning on the old chevy truck...as far as the mini Tonka how about make it look like an old kenworth or freightliner cab over and build a custom narrow fifth wheel camper my shop could help with interior on the camper..I see a lot of tiny home why not a tiny camper? Keep up the good work
Everyone is doing an awesome job. Keep up the great work Sam.
Thanks for watching
Btw: that scene from "Spaceballs" at Mr. Rental never gets old! It is so damn hilarious that I wonder how the actors kept their sh*t together through the whole scene... 😂
My god, that movie is sooooooo endlessly quoteable... 😁
That movies a classic!
Make that little truck into a tow truck sick😮
This is definitely the best route to go for a vehicle that is intended to be on the road away from home for extended periods of time. Propitiatory/hand made parts suck when you have issues trying to get back on the road.
Yes I’m really excited to have a modern frame under this truck. Especially if we are driving it a lot
can't wait to see it finished i commened before watching
Can’t wait!! This series is going to be fun
All the right calls were made, way more interesting to see the cab swap, plus I would think drivability goes up exponentially.
I think that was the main reason I wanted to go this route.
Shout out to Sam from the green mountains of Vermont!!!! Keep up the good work.
Thanks for watching!! Sam sure did kill it
I would put that cab on the Ram chassis. Done 👍🏻
Well we are kinda done with that part haha
Looking forward to seeing this completed
Me too!
Doing a great job Sam everybody's doing a great job way to go
Sam’s killing it
Those original big steel rims with pizza cutters are the coolest. Hope you can fit them in the new axels some how.
They don’t fit and they are pretty dangerous apparently. Wish we could keep the look
@@BASIN_NATION thats a bummer. You'll make it cool anyway
Cab swap ftw.
Heck yes
Miles ahead ! Is the frame long enough ? if so just set the camper on 2 x 4's to level it out ! Running duelies ? Make sure you have mud flaps , it will save your trailer front !
I called too. Cummins swap for the win.
Thanks for the comment! Stay tuned for more
I’m building a 1960 Apache at the moment. I’m on your way to Alaska, so when you’re coming through, we should meet up!
Lets do this!
Gonna be a sweet build! Great progress in this episode.
That cab looks awesome on that dodge frame😊
It’s meant to be!!
ONELOVE FROM LLANELLI WALES... KEEP UP THE AWESOME WORK.
Thanks so much
Another one!!! I guess I can just keep saying since I do every Sunday I love your guys videos and what you do! Look forward to seeing next weeks as well!!
Every Sunday!! Plan on it
@@BASIN_NATION absolutely the top thing I look forward to on a Sunday!!
Sam did a good job it's looking nice 👍👏👊🤜🤛
Sam kills it
Put the mini Tonka on tracks 😂🤘
Good idea!!
Looking good wasn't sure I was gonna like Aaron cutting the firewall to lower the cab, but after seeing it mocked up I like it. Sam as a person who didn't take care of his lungs and is paying for it, kudos for wearing your PPE. Because I didn't, at age 45 I now got asthma and other issues. That 292 I would put on a hotrod site or market place to get some money back. Also the 66 frame might make you some money as well.
The 292 went to a high school program
In Wyoming. They are going to rebuild it as a school project
Heck yeah would be cool to see the final product of that rebuild.
Yes power nice engine guys
Thanks for watching
I'll be honest originally I thought I were gonna swap the c60 cab to the other chassis but then I realized otherwise ......but definitely that really seems like the best bet to save time and have a newer model everything under the truck ......makes maintenance a lot easier when time goes by
It for sure will save some time in the long run
Sam your doing a great job I have seen some car bodies put on 4X4 frames and I think this transformation is going to look like it came from the factory
I think it will look great
Wow you've got some right Grumpy people working with you on this truck
Safety's always the most important thing. But you have done an excellent job. She put up the wonderful work and I like what you've done
Dont worry Cole Arron is good at what he does he does some impressive stuff with metal
He’s a metal wizard
I appreciate the video
I appreciate you appreciating the video
Sam is also the most diligent forklift driver i've seen on youtube so far.
He’s the best fork lifter ever.
great project and post, good team...right plan...that cummins train in that svelte, old fisher frame?...hmm
He did a great job it looked like he was always busy
Like what you’re doing. Good job Sam. Put a 4BT in the mini-dump.
nice work so far I think that was a great idea using the Dodge frame.
I think so too!
Good job protect those lungs.
Awsome build so far.
Sam is killing it!
Cole I got to let you know Aaron is definitely one of your most valued employees and I see that the rest of your employees seem to be doing some great things also I've enjoyed this segment😮😊
I appreciate that! Thanks for watching
Great video!! Definitely a wise decision to cab swap. Already have an established foundation to work with. You guys work awesome together🤙🏻🤙🏻
Looks good so far . Smart choice on the cab swap . One thing I did on my 1948 Chevy 6400 (same size like yours) is I made the nose flip forward .I open the hood , pull a couple bolts and unplug the electric and the fenders and grill tilt forward . The radiator stays in place . It’s a game changer when you have to work in the engine bay . It was really easy and I don’t have half the resources you have . I was going to use the same front axle you have to 4wd my 81 Dodge Trans-Van camper . I wanted to keep the coil springs . To save on a bunch of fab work I figured out that I could use a couple Ford E-350 radius arms I guess you call them . One mod would be to stretch them a bit then use 2 heim joints to connect them to the axle. Instead of rubber bushings , I’m sure there are polyurethane bushings out there .The bracket that the radius arms bolt into with the 2 bushing sandwich just unbolts from the frame . I think this will you a better ride than the stock short Dodge ones . If you want pics of my forward tilting front end just let me know .
Good work!
Thanks!
Turn the Tonka into a bouncing lowrider. Curb feelers, spoke rims glitter gold paint job the whole works. Robby Layton would have a blast painting it im sure.
Nobody has done that
Great job Sam❤
Sam kills it everyday
Sam, when you’re in your 60s and 70s, you’ll be very happy that you wore that respirator
It's looking good. Thanks
I’m thinking Sam is the cat’s meow. He already has common sense. You can tell he knows what he’s doing. Seems like he has no problem having people show him what’s up. The biggest thing is he got all that and he still young!!! He’s going places in life. That’s about the most love I can show boy. He’s got going on. Just don’t get stupid Sam.
I would much rather have the modern drivetrain, brakes, steering and everything it comes with. You won’t have to change the entire electrical system. I agree with Aaron. 😊
It was a wise choice
Going to be cool
Guy's, i woulda swapped the cab over too. you have all of the stuff for the build..
Gotta do what you gotta do
Hope you can get power steering on that thing. C60’s were hard steering beasts.
Got lung issues whish worn a respiratory sam a smart man thumbs up
Heck yeah brother 👍🏻🇺🇸
🤘🏻
I wonder how many purists will have an issue with the partial frame swap, it definitely makes sense, especially with the engine and trans upgrade which will need brakes upgrading to match.
I think Sam has been great from the beginning!
The new press brake looks like a mighty beast in the background! 💪👍
New press brake going to make life easier! Thanks for being here again my friend
You should make that kei truck a half track, and put liquid springs and a modern bench seat on the Chevy
Good idea on the liquid spring
I have done a few of these style swaps, the thing on the C60 is that it was designed for the motor to sit further down, when you swap it onto a pickup frame, the frame horns bend up and lift the engine higher.
IMHO not the best setup because it creates the space issue that you are now facing, personally I would have stuck with the original frame and swapped everything over to it as then the engine could have sat further down under the cab, the stock ride height could have been retained, and then you have the option of either a 4 link or mounting a 4x4 front axle on the stock leafs, although that will lift it significantly if you do.
But that is why you run into the clearance issues with the floor and firewall.
Cab swap will yeild a better machine. Good call!!!
100% can’t wait to drive it
Some sort of turbo diesel with stacks and 2 1/2 or axle techs for the mini dump
It’s looking good guys…
Thanks for watching
Cab swap seems the best choice here. A part of me wishes you went with a ford frame, but even as a Ford guy i admit the cummins beats the powerstroke every time
I do understand why you decided to do the cab swap onto the newer dodge chassis. Due to my location and registration/emissions requirements, I would have done the dodge drivetrain into the c60 chassis. Either way its gonna be SWEET!
It’s gonna be so sweet! Thanks for watching
Rear engine mount the motor from the C60 in the Tonka and make a drag truck out of it😅😊
That would be awesome
Aaron is a Mexican’t that can do a lot of cool stuff!
He can do all the cool stuff!
Can swap FTW this is going to be a killer build. A cab and chassis ram frame would be perfect
Thats what we got
4 bt in that little Tonka truck would be a good swap
That would be cool
Baby Dozer. Big tires, twin turbo, diesel in the bed, rear steer.
Hector is going to be running 3 Honda Civics with spoon engines. And on top of that, he just went into Harry's, and he ordered 3 T66 turbos, with NOS.. We are going to have to k24 swap the mini Truck..😂😂😂
I almost had you
l almost bought a 67' camaro in the late 70's that the straight 6 and 2 speed power glide in the center console. The car was low miles and minty fresh when l drove it and lve always regretted not buying it. lt was plenty fast and as fun to drive as the 69 SS/RS 396 4 speed l wound up with.
That’s a sweet story!! I want a camera so damn bad
epic series
Put a cam, intake and carb on that 292 and stuff it in that mini dump, then you’d have something!
The 292 is bigger than the baby dump haha
@@BASIN_NATION that’s why it’s perfect! Put it in the bed and make it a mid engine like a monster truck!
13:12 Y’all should throw tracks on it and slap the 292 into it. 🤷 I personally have seen tank or snow tracks on one..
Sam needs a raise. $$$
New poncho 🤘🏽
Porsche engine in the Kei truck in the center.
Very interested in this as im sitting on my 1947 one ton dually Dodge project thinking of the same cab swap idea. Wondering what the width is on the 2013 Dodge frame rails, as ‘47 gets s tad narrow. I suspect ill cut the firewall to match the modern stuff. Props to you all, going to be awesome 🙌 also edited to say smart working Sam good on you.
That’s one big reason we went this route as well. The transfer case was offset and it wouldn’t fit between the frame rails that well
@@BASIN_NATION as a former Ak wilderness resident I’d be stoked to see that pull up Denali highway🤙going to be good boys.
@@loudfast1261 we will look out for you up there
I didn’t even know that Chevrolet put that small of a motor in the C60. I thought that the most common engine in those trucks was the 366 Big block 6 liter V8.
Sam the man!
1000% put a little 4bt Cummins in the baby dump. And some miniature dually wheels like a dump truck.
It would be pretty rowdy
Great job Sam 💪😎 not wearing a mask that kid might get Peyronie's syndrome 😂😂
PPE Sam👍
Forget the yellow paw paw golf cart 😂😂😂
We have a lot going on…. But we can’t forget about the baby dump. Haha
@@BASIN_NATION 😂😂😂👍🏻
Had you not done the cab swap, I would have suggested that before you went any further. You now have 1960s GMC vin with a 2013 Dodge drivetrain, suspension, brakes, electrical system and chassis with parts and servicing availability at stellantis . The only thing that says GMC is the cab.
Such a nice old survivor cab and chassis, you are a Blessed Man Living a good Life. I can almost see the Alaskan Landscape now. Are we there yet? 😂Are we there yet?
You are Lucky to have MeatBall / PitBull & Tthe Young Blood on the Team, it’s Great for You but He Truly is the Real Winner. I’m confident He will Reflect Upon these Day’s , as The Best Day’s of His Expression😮, Speculation of Course.
I'm going to use the line "fastest thing on this truck are the windshield wipers"
Hahhaa
Need to put a small diesel in that kei truck. Kubota or tdi
That would be fun