Why Isn't My Electric Fence Working? - Tips Every Farmer Should Know
HTML-код
- Опубликовано: 9 июл 2024
- Is your electric fence not working quite right? Or maybe it's not working at all. Most problems with electric fencing are not as complicated as one might think. In this video I cover some basic troubleshooting tips that every farmer should know if they have electric fencing on their farm, or are planning to build electric fencing.
Check out our website: planeview.farm
• Electric Fencing/Fence...
Very good information - thanks for posting. Love the t-shirt!
Best video ever!!!!❤❤❤
Nice video
Can I wrap the electric wire around a wood post or do I have to buy a insulator
A bare wire will ground out on the wood post, especially when it gets wet. You can use wrap around insulator tubing instead. It's a little bit cheaper than individual termination insulators.
kencove.com/fence/detail.php?code=I40-100
can you touch tester to electric wire and steel post to test the fence
Yes
9:10 can you elaborate more on that? I've never heard or thought of that. I'm planning on getting a much larger than currently needed charger, but I'm also adding on a lot of fencing, but in stages. I don't want to damage an expensive unit.
I probably should have done that in the video. 🤦♂️ Being oversized for the fence system can be hard on the internals of some of the cheaper equipment. If you buy a high quality charger, you'll likely be ok.
I bought a really powerful energizer and it has worked out pretty good. I do think that being oversized causes it to "find" weaknesses in your system. For example, I've had it burn through some of my cheap tubing insulators. But the advantage of the powerful system is that it burns the weeds / kills the grass and weeds so that you don't have to trim as much. For me, it's worth it to have the big joules.
@@PlaneViewFarmcan a cracked insulated cause it to ground out. Even if the wire is not completely against the post
@@solschwartz7119 Yes it can! It can arc across and ground out. That's a really good question. I wish I had included that in the video.
@@PlaneViewFarm thank you
I bought a 26 Joule energize and currently have it hooked up to 830 ft of poultry netting. I know that is more joules than needed but I’m planning on fencing off about 30 acres with additional cross fencing. Right now, the netting is touching grass in several area and I hear a lot of clicking. I’m concerned it might catch the grass on fire. Is that something I need to be concerned about? Will adding more ground rods reduce the risk?
Fire really isn't an issue with modern energizers because the current is pulsing. Older energizers had an issue with fire because the current was continuously flowing. The only real risk might be if the grass is extremely dry and the wire contacts something that might cause it to throw a spark. Even then, the risk is low because that spark isn't likely to be hot enough to start a fire. I hope this helps.
I noticed your ground wire was attached straight to tpost with clip does this help ground
Good question! It does provide some grounding for the system, but not much for a couple of reasons. The posts don't get deep enough to provide much ground contact, while a grounding rod will be at least 6 feet deep, if not more. Also, the wires are not fixed tight to the posts with the clips. They are just loose enough to expand and contract. That allows for breaks in the flow of current back to the energizer through the ground. I hope that helps.