Table Saw Improvements | Workstation Build | Part 3
HTML-код
- Опубликовано: 11 сен 2024
- Welcome back to allready the third epsode of my table saw workstation build project. After making a new top and a frame around the original tablesaw it is now time to make some zero clearance inserts. Also modified the riving knife. I must tell you that i am doing everything on my own way. Based on my 20 years of professional woodworking experience i am building this workstation. My goal is to show everyone you can make a table saw workstation for a minimum budget. make woodworking affordable. That's why i chose OSB, MDF and a used tablesaw for example. you are free to copy my work but make sure everything you do is safe. If you don't trust it don't do it. check everything twice befor using. You have to be responsible to yourselve. Enjoy This video and please let me know what you like or dislike about my project.
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hastags: #Tablesaw #improvements #Workstation
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Links to social media:
Pinterest ► bit.ly/2mI9iTm
Instagram ► bit.ly/2mByg62
Facebook ►
Instructables ►
reddit ►
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Music: youtube audio library
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
I’ve been watching since almost day one. I think Laura Kamf? sent me over. Your skills both in woodworking and videography, are growing and it is delightful to watch you work.
Thank you very much Terri. That means a lot! 👍
That's a good idea to make multiple zero-clearance insets.
Thanks mate 👍
That saw is coming along great👍
Thanks buddy! 💪
Superb upgrade!! Very impressive. Great to see you were able to keep the riding knife with your fantastic new zero clearance plates.
Love your stuff. Keep safe in these dangerous Covid19 days.
Thank you very much! 👍👍
Good to see the reappearance of the good old riving knife! 👍👍
Thank you very much mate 💪
GREAT build. Gave me ideas for my table saw .
Yep that was cool to have different inserts.
Thanks buddy! 😄💪
Each of the plates look lik a perfect fit. Great job. The workstation is coming along exceptionally well!
Thanks Richard! 👍👍
this way it is nicely complete, lots of cutting pleasure.
Thank you!
I like it...a great additions to the table saw build. 🙌🏻 Neat idea!!
Thanks Kirstie! 👌😊
Now you pull out the MDF! I wish I had enough money to send you some nice plywood 😉😉 Looking good though, can't wait to see how you design the fence!
Hahaha sorrry mate that i am hurting your eyes with the materials i use 😅 i am a budget man i guess 🤣 Thanks for watching!
Dit is een hartstikke goed idee, dit ga ik morgen ook doen. Dank je wel voor delen..Gr.Ingrid
Dankje Ingrid! Ben er zelf ook enorm blij mee. Ben benieuwd naar jouw resultaat. Mvg
I have a very similar saw and will be starting this project on the weekend. Very much looking forward to seeing the way you create a fence. 👌
Thanks John!
built one thank you!
Nice👍🏻
Thanks!!
Awesome project mate!
Thank you!
Dat ziet er goed uit Hendrik. Goed bezig 👍
Bedankt Henk 👍👍
Your Video series helped me alot, i bought the Microjig miter bars an found they dont fit my table, i been looking for away to attach a new table on mine so i can make my own miter slots ,
Hello, looking forward to the next episode,,,
Thanks Jeff!
@@Dutchshedwoodshop So, I have the top on. My hesitation is cutting out the hole for the inserts. I cannot cut straight with a jig saw. Boutght a new one and it is much better but still afraid of ruining the top. Any suggestions tips, videos? I uses melamine attached to particle board for the top.
I too am hesitant on cutting out the inserts. I also bought a new jigsaw but seen to still need some more practice. I am contemplating making a frame jig for the jigsaw or the router. I am thinking I will get the best results using the router
Hello, really enjoyed this series of videos and it's inspired me to improve my table saw too, but where are parts 4 and 5 you mentioned in your first video. I'd like to see how you made a more permanent fence, and how do you stop the whole thing moving on the wheels when you are using it. Thank you..
Great additions to this growing build mate. Can't beat a angle grinder shot can you👌 was that timber fruit tree and did it smell really nice? Looked like some I had a while back.
Thanks mate. Angle grinder shots are always awesome 😄 no its douglas fir. But smells great aswell haha. Thanks for watching!!
How do you stop the table, since the casters are underneath the table? great job by the way!!
Thank you so much. I have a table saw the same as this on, & was thinking I'd have to do something like this to get some accuracy. I like the idea of the different inserts as well. Have you got brakes on those wheels?
Have you made a video for the fence yet? I'm ready to see how you do it before I start this build
Hi Jeremy, i have made it allready but not filmed it. pretty easy and i can send you a picture if you like.
I’ve searched hard for simple cheap table saw improvements like this for the past week or so and this is the best I’ve found. Really like the build. Have you made a fence yet and also any thoughts about channels for a miter gauge or sled?
Thanks for watching, yes i made a fence but have not filmed it. If i would make this again i would use 3/4" mdf for slots indeed
Next build - outfeed table!
Thanks!
Very nice! Which store do you buy the wood from? Bedankt!
Thanks 👍 bij mij in de bouwmarkt 😄
Will you create a fence for your top update?
Nice work!! Do you find that the red paint leaves marks on your projects?
Thanks Paul, no it does'nt i sprayed a thin layer wich soaked right into the mdf.
ME GUSTARÍA SABER QUE TIPO DE CARRO AÑADIO A LA MESA QUE HA HECHO EN LOS DOS VÍDEOS
Now time or a proper fence?
i like your pen i want one
Thanks
www.amazon.com/Pica-150-46-SB-Deep-Hole/dp/B07KPM27HN/ref=sr_1_1?dchild=1&gclid=CjwKCAiA57D_BRAZEiwAZcfCxUeagS3K4m0jP8x2ezXtR86u6D2u8QIj6HQtvDv-Zyx3nv4aW2cvihoCA2kQAvD_BwE&hvadid=455208641171&hvdev=c&hvlocphy=9030091&hvnetw=g&hvqmt=e&hvrand=13427583551692648947&hvtargid=kwd-937988644970&hydadcr=5377_9616646&keywords=pica%2Bink%2Bmarking%2Bpen&qid=1609365294&sr=8-1&tag=googhydr-20&th=1
So how does the surface of the osb effect your cuts? I'd be worried the wood might catch on it or snag.
do you find you lose much height off the blade with the OSB board top for the saw?
Hi Shaun, i lose 10mm of hight because of the osb. But i never use the full 90mm of hight anyway. Because the tablesaw is not powerfull enough for that! So no i don't find i lose hight 😄 thanks for watching 👍
Ziet er goed uit! Waar heb je die zaag vandaan als ik vragen mag?
Bedankt! Marktplaats :) tweedehandsje. Maar volgens mij heeft powerplus dit model ook in het assortiment!