My friend, I was hypnotized watching your amazing 3 videos where your work gets reflected. I am standing up clapping for the result of your astonish and meticulous work craft. Congratulations and thanks for sharing it
Your next masterpiece will be a great benefit to me. For a long time I want to upgrade my quick saw machine. And please be careful when sawing workpieces. Heart breaks sometimes!
Meu amigo show de bola seu projeto para bancada de Serra foi uma ótima apresentação e muito boa à demonstração valeu e de grande utilidade muito bom mesmo a e expostas as medidas assim facilita muito obrigado
Gracias por enseñarnos a aprender y regalarnos de su valioso tiempo maestro de Aguascalientes México Francisco gamez 👍👍👍👍👍👍👍👍👍👍👍 un abrazo muy fuerte para usted y toda su familia saludos cordiales felicidades es usted genial bendiciones
Parabéns pelo trabalho ! Ótimas dicas. Muito bem detalhados. Uma boa tarde pra você e família. Feliz Páscoa. Abs brother Falando de São Paulo Brasil 🇧🇷🇧🇷🇧🇷
( 14:20 ) This is a genius idea for fine tuning the fence for a perfect 90' to the rail, but the final cinching of those bolts better be done at the final stages when the fence is on the table and with a very long accurate square tool.
Todo muy bien, te felicito, veo toda la herramienta que te has hecho con madera, de a poco té estaré copiando, lo único que me hace un nudo en el estómago, es cuando pasas la mano tan cerca de la sierra...
Добрый день! Прекрасная работа! Меня смущает два момента. 1. Кнопка включения, у вас пила около 2-х кВт подключена через выключатель освещения. рассчитанный максимум на 300 Вт. Магнитный пускатель и пара кнопок обойдутся в 10-15 евро, на фоне общих затрат на проект, мелочь. Но это общее место у домашних станкостроителей, на фрезерные столы и пилы в столах ставить клавиши от освещения. 2. Ось поворотного механизма привязана не к грани фланца шпинделя, а к правой плоскости диска.Если вам придётся использовать диски другой толщины,то ось поворотного механизма окажется внутри тела диска, и все настройки окажутся не актуальными. Левая поверхность диска, независимо от его толщины, всегда находится в одной плоскости, так что логично её использовать как базу. В остальном, продуманность деталей и четкость исполнения выше всяких похвал.
Hi Mr Gokmen.. it is really creative idea... I want to apply that in to my circular saw made from DC Motor 795....thanks for another inspiration... Wish U always success
very interesting and useful video! congratulations! I have a question: does the fence stay parallel being a console? side force tends to bend it. and there is no back support
Many saws are built that way And do just fine. Materials and craftsmanship make a difference, but only testing will tell you if it's good enough. I've seen similar designs with similar materials do just fine.
@@ewdtrey I aßked not for curiosity. I intend to make such a sence. I built a fence with bushings moving on two pipes (from and tear). But the movement is not parallel ((((. Friction in bushings is small but it tilts the fence. I have to adjust its position to the disk manually each time
@@АлексейМаринчев-м1з might need to decrease the tolerance in the bushings so that they are tighter or at least tighten when clamped down. It might also help if you increase the length of the bushings along pipe/fence. Rockwell used to make a nice fence/pipe rail system that always stayed square(parallel to the blade)
@@АлексейМаринчев-м1з on most "pipe" rails the back rail is mostly there to keep the fence close to parallel when moving it. The front rail gives the distance and makes the final adjustment for parallel.
@@ewdtrey I do not have access to rockwell. With shipping costs it may be too expensivefor me. My bushings are tight enough. I used the sliding pair from a hand cutter for ceramic tiles. But the distance between them on a saw table causes asubstential tilt. The ball pairs for cnc machines could be a solution but a console T slider fence seems more suitable for me. I can also use an aluminium T slider bar and track for higher precision
Can you do some extra explanation on the fence clamp? The size? Dimensions? Shape? Position? Maybe in a next video? I have trouble getting this set up. I built the fence!! 👍🏻
4 года назад+5
Draw a circle 42mm in diameter, drill a hole 10mm in diameter 3mm above the center point. You can make the handle in any shape and size.
Good job, well done. One question though. Why not having some fixing on the back side of the table ? I mean just an L-Shape like on the front, but with not specific locking mecanism. It would put the whole assembly in tension, so there would be no possibility for it to move (for any reason). [Edit] Maybe it's just some overthinking on my side [/Edit]
Simple, clearly robust and absolutely functional. Another masterpiece. Thanks for the measurements too. One question, which grade of ply did you use? I imagine it is a hardwood based ply given you tapped into it and the bolts didn't strip out.
4 года назад
Thanks my friend. I used birch plywood, it's so hard and durable.
@abi sen nasıl bir zeka ve hayal gücüsün seninle gerçekten tanışmak istiyorum İstanbulda isen mutlaka yanına gelmek istiyorum ne olur benimle tanış hayran kaldım ağzım açık izliyorum şaheserlerini 😮❤
If only I had 25% of your
- space
- tools
- talent
- imagination
- skills
(- money)
You’re the best! Thank you and stay healthy!
Master piece of woodworking. Every single video is pure gold.
And the people that think differently, we see outside to fight.
I have seen quite some videos about table saw fences. This is my new number one!
Simple yet super Effective and its FREE what more can you ask..good job man..
I have watched many of your videos. the efficiency of your brain and your hands is exceptional.
congratulations
thanks, glad you like it 😊
Fantastic easy, durable and practical build, well done.
Just brilliant. Love your work
Ian, Birmingham, UK
As always, outstanding design. Very innovative craftsmanship! Thank you for sharing with us.
Excellent Work! This is one of the best homemade fences I've seen around. Thank you so much for sharing!
Отличная работа 😀 идея то что надо 👏👏👏 однозначно Like 👍👍👍👍👍......
like always, a very fine job with spendid result! and a very clean worker too!
My friend, I was hypnotized watching your amazing 3 videos where your work gets reflected. I am standing up clapping for the result of your astonish and meticulous work craft. Congratulations and thanks for sharing it
Thanks my friend 😊
Brown nose.
@@ejer. 😂🤣
Güzel ve pratik bir çalışma olmuş elinize sağlık. Fakat anlamadığım bir şey var. Beğenmeyenler ne bekliyor ve istiyor ki?👍
Propably the best setup i have seen so far for a diy rip fence
Ustam eline emeğine sağlık. Mükemmel oldu. Yemin ediyorum Bunun videosunu yapacağını tahmin etmiştim. Teşekkür ederim.
Bravo! Another video packed with useful information and helpful tips! Thanks!
Great job. Nothing else expected.
Как всегда! Очень круто! Очень доступно! 🔥👍🔥
10:04 с флажком, гениально придумал
Ingenious and practical, as always. Thumbs up to crush a troll.
world best home made table saw fence of plywood Amazing
Another great video of Gokmen.Thank you very much !!!
Great work!!!! Thank's for sharing my friend!!! Panos from Rhodes island
Excellent travail et belle réalisation, bravo👏👏. Merci pour cette vidéo avec les dimensions pour la réalisation. Norbert ( France)
the genius of self-construction struck again, always good
O melhor video de uma fence q ja vi, tao bem detalhada e mostrando bem todos os detalhes da construção, parabéns.
Gracias por el aporte y vídeo,como siempre excelente trabajo.....
Excelente aportación muchas gracias, la voy aplicar a mi banco sierra.
Saludos desde Veracruz México
Благодарю Вас. Полезно и доходчиво. Удачи.
The ability to adjust the fence back to 90 degrees is a brilliant addition - Thank you!
Your next masterpiece will be a great benefit to me. For a long time I want to upgrade my quick saw machine. And please be careful when sawing workpieces. Heart breaks sometimes!
Good choice nice information
Meu amigo show de bola seu projeto para bancada de Serra foi uma ótima apresentação e muito boa à demonstração valeu e de grande utilidade muito bom mesmo a e expostas as medidas assim facilita muito obrigado
Herzamanki gibi mükemmel bir çalışma olmuş. Keyifle izledim
Teşekkürler 🙏
Another great job, thanks for sharing Gökmen.👌
Gracias por enseñarnos a aprender y regalarnos de su valioso tiempo maestro de Aguascalientes México Francisco gamez 👍👍👍👍👍👍👍👍👍👍👍 un abrazo muy fuerte para usted y toda su familia saludos cordiales felicidades es usted genial bendiciones
Okey lahat ang mga likha nya.salamat sa pagpapakita ng iyong mga gawa.mabuhay ka.
Parabéns pelo trabalho !
Ótimas dicas.
Muito bem detalhados.
Uma boa tarde pra você e família.
Feliz Páscoa.
Abs brother
Falando de São Paulo Brasil 🇧🇷🇧🇷🇧🇷
Спасибо за видео!! Понятно, просто, надёжно и аккуратно..
Удачи!!
( 14:20 ) This is a genius idea for fine tuning the fence for a perfect 90' to the rail, but the final cinching of those bolts better be done at the final stages when the fence is on the table and with a very long accurate square tool.
Sayin altuntaş bey Bu da esgi işleriniz gibi çok güzel olmuş elininize sağlik zevkle izledik bütün işlerinizde sizin için başarilar diliyorum 👍👍🌹🙂
Çok teşekkürler Davood bey.
Are there plans available for building the combination table saw. If so what do they cost
always a pleasure watching your videos. Хвала
Por Siempre ¡ EXCELENTE ! Gracias por compartir. 🌟🌟🌟🌟🌟🌟 Saludos desde México.
Me gusta ver tus videos son bien didácticos., Pretty cools your videos, I like that. Thank you.
Excelente amigo buen video de la guía paralela te felicito, gracias. Luis de Peru
Прекрасная работа и качественно снятые видео.
спасибо, рада, что понравилось 😊
Ну как всегда, ты лучший!
Super travail, félicitations, j'ai pris des idées.
완전 금손 이십니다.작업마다 감탄 스럽다는 ....
Ficou melhor que as que vem com as serras de bancada. Parabéns
Hay maestros carpinteros que son una maravilla !!!
Un trabajo fantástico 👏👏👏 Gracias
Todo muy bien, te felicito, veo toda la herramienta que te has hecho con madera, de a poco té estaré copiando, lo único que me hace un nudo en el estómago, es cuando pasas la mano tan cerca de la sierra...
Христос Воскресе! Поздравляю с Русской пасхой.
Şansa bak la....... diy table saw fence yazdım senin ki çıktı. 1 saat olmuş yükleyeli birde. Sanki dizinin çıkmasını bekler gibi oldu :D
Merci beaucoup. Bonne année à toi 2021.👍
Absolut Top Fence . Great Job
Feliz y contento porque mi cortadora de mesa no tiene guía ahora ya tendrá, gracias !!!
Yes absolut top fence very good job lovett
good job, well done
Добрый день! Прекрасная работа!
Меня смущает два момента.
1. Кнопка включения, у вас пила около 2-х кВт подключена через выключатель освещения. рассчитанный максимум на 300 Вт. Магнитный пускатель и пара кнопок обойдутся в 10-15 евро, на фоне общих затрат на проект, мелочь. Но это общее место у домашних станкостроителей, на фрезерные столы и пилы в столах ставить клавиши от освещения.
2. Ось поворотного механизма привязана не к грани фланца шпинделя, а к правой плоскости диска.Если вам придётся использовать диски другой толщины,то ось поворотного механизма окажется внутри тела диска, и все настройки окажутся не актуальными. Левая поверхность диска, независимо от его толщины, всегда находится в одной плоскости, так что логично её использовать как базу.
В остальном, продуманность деталей и четкость исполнения выше всяких похвал.
excellent work!
просто в исполнении и надежно в работе. Сам проверил
Very well done. enjoyed the video. subscribed.
Um bom trabalho ,bem executado,bom acabamento 🇧🇷
Awesome. Simple and effective :D
Bel lavoro...un saluto dall'ITALIA BRAVO
Amazing job!
Молодец. Подсел на твои видео.
Hi Mr Gokmen.. it is really creative idea... I want to apply that in to my circular saw made from DC Motor 795....thanks for another inspiration... Wish U always success
Nice diy table daw. I got mine too but still need to upgrade
Excelente trabajo!!!! Saludos
very good project
muito bom seu trabalho , já fiz a serra de fita estou terminando a lixadeira vou fazer a serra circular e a tupia de mesa
complimenti. Ottimo video e eccellente lavoro
hi !!! there is the good work !!!! yeah..........
Beautiful work.
Que ABURRIDO (BORED) VIDEO
greatly awesome and nice👍
What is your table made of? worktop?
Dude you are really super duper awesome. You can out run Bosch, Dewalt, Makita....
thanks, glad you like it 😊
*Good job 😉*
Good job brother
Fantastic video, really clear. The best one of its kind I’ve seen, I’ll be using this to make mine.. instantly subscribed.. well done & Thanks..😄😉
Brilliant video thanks, can you tell me where you sourced the metric/imperial sticky back tape please
Thanks. I bought it from Aliexpress
Como siempre, excelente!
Thank you for this video. Also all sizes. Compliment. Regard Modesto
thank you ,sederhana dan mudah di fahami teman.
Big precission! 👏🏻👏🏻
Bravissimo 👍🏻👏🏼👏🏼👏🏼
Common man, eliminate the mundane fluff like screwing in every screw and spreading the glue! I do appreciate the brainstorming, though.
very interesting and useful video! congratulations! I have a question: does the fence stay parallel being a console? side force tends to bend it. and there is no back support
Many saws are built that way And do just fine. Materials and craftsmanship make a difference, but only testing will tell you if it's good enough. I've seen similar designs with similar materials do just fine.
@@ewdtrey I aßked not for curiosity. I intend to make such a sence. I built a fence with bushings moving on two pipes (from and tear).
But the movement is not parallel ((((. Friction in bushings is small but it tilts the fence. I have to adjust its position to the disk manually each time
@@АлексейМаринчев-м1з might need to decrease the tolerance in the bushings so that they are tighter or at least tighten when clamped down. It might also help if you increase the length of the bushings along pipe/fence.
Rockwell used to make a nice fence/pipe rail system that always stayed square(parallel to the blade)
@@АлексейМаринчев-м1з on most "pipe" rails the back rail is mostly there to keep the fence close to parallel when moving it. The front rail gives the distance and makes the final adjustment for parallel.
@@ewdtrey I do not have access to rockwell. With shipping costs it may be too expensivefor me. My bushings are tight enough. I used the sliding pair from a hand cutter for ceramic tiles. But the distance between them on a saw table causes asubstential tilt.
The ball pairs for cnc machines could be a solution but a console T slider fence seems more suitable for me.
I can also use an aluminium T slider bar and track for higher precision
perfetto gran bel lavoro bravo
Can you do some extra explanation on the fence clamp? The size? Dimensions? Shape? Position? Maybe in a next video? I have trouble getting this set up.
I built the fence!! 👍🏻
Draw a circle 42mm in diameter, drill a hole 10mm in diameter 3mm above the center point. You can make the handle in any shape and size.
Gökmen ALTUNTAŞ thanks
@ thank you!! I am up to 8:07 in the video and got stumped wondering what radius ... now my question is answered!!
Excellent! I had to subscribe.
Thank you.
well done!
very steady success always
very nice , But I would like to ask about the table top. Is it plywood and you paint it or what? if you can make a video about it that will be great
Excellent!! 👍
Good job, well done.
One question though. Why not having some fixing on the back side of the table ? I mean just an L-Shape like on the front, but with not specific locking mecanism. It would put the whole assembly in tension, so there would be no possibility for it to move (for any reason).
[Edit] Maybe it's just some overthinking on my side [/Edit]
Simple, clearly robust and absolutely functional. Another masterpiece. Thanks for the measurements too. One question, which grade of ply did you use? I imagine it is a hardwood based ply given you tapped into it and the bolts didn't strip out.
Thanks my friend. I used birch plywood, it's so hard and durable.
@abi sen nasıl bir zeka ve hayal gücüsün seninle gerçekten tanışmak istiyorum İstanbulda isen mutlaka yanına gelmek istiyorum ne olur benimle tanış hayran kaldım ağzım açık izliyorum şaheserlerini 😮❤