Don't cool it first... put the bottle in the hot water for a couple of seconds, then run just a little cool water over the scratch. It will pop apart. Use a propane torch to to smooth the edge, and allow it to cool slowly.
Lollipopx girl16 I do, mostly to critique how people do things I already know how to do better. However, I do find a few that teach me better ways, and I appreciate & adopt them. CRH I just find entertaining for his presentation.For what it would take to get good enough at the technique shown here not to waste a lot of $ & get cut a lot, I think I'd rather learn to BLOW glass!
Even though the first bottle was not perfect, you probably could have used pliers to snap off the remaining piece cleanly, then wet sanded the entire cut area. You do realize the abrasive paper you used is not wet/dry paper. Using regular sandpaper with water will make all the abrasive fall off in no time. The clear spiral glass was very nice.
I've worked with stain glass in the past and was going to say your first attempt could probably be saved because it is scored. You just need stain glass pliers. Probably not the official name but you can look it up. Love the swirled glass. Great ideas!
I like how you show the bloopers kind off like when it doesn't properly succeed, that's why I love this channel as for it shows that everything won't go perfect at first unless you keep trying
These are awesome glasses If you soak a cotton wire in gasoiline, bind it across the bottle, light it on fire keep it sideways and turn so the fire touches all around the cutting line. then put the bottle in a bucket of cold water, the cold makes a perfect cut in the bottle.
This also works by wrapping a cotton cord around a bottle, make sure it goes even around the bottle and has a firm knot. Then soak the cord in benzine, alcohol, acetone, nail polish remover or other flammable solvents you happen to have at home and light it on fire. Spin it a little around while the solvent is burning. When the flame is almost burnt out, cool the bottle quickly with cold water. Now you should be able to pull the bottle into two even cut pieces.
At 0:18 "Just Google it on Amazon, EBay, Whateviar" At 4:41 "Now Luke like awesome dis glass Luke like" At 5:02 "Crazy Russian Hiker Facebuk" At 3:04 "Feldoff" At 3:46 "Luke is not polish yet" At 0:35 "Hold up tightly my butthole"
Please leave him alone he is Russian he doesn't speak good English he is way smarter ,interesting,and fun than you. You are just jealous of his popularity and subscribers go to someone else's channel and do that or you could go in a corner and cry
Finally a life hack I already knew about! My dad has a bottle cutter and he made me a couple of these from beer bottles. Pretty cool, but honestly I never drink from them. They're just displayed on a shelf.
+I'm Elif - well I em no crazy nor russian either, but I too can gev tips foor life hacks. So if yu cannut buy bottle cutter, just drop eh rope in oil then tie it eround ze bottol, and light it on fire for eh fiu sekends. Then drop deh bottol in veery cold woder (with ice in it or somefeen) and it shuld cut itself purfictly at the part where the rope wuz tied. Oll yu haf tu doo now is rubbing every sharp bits of glass with sandpaper, and BOOM ! Yu gat yur glass done from deh bottol. Pritty koo', huh ?..
You can do it by puting a rope around the botle burnit up leav it burn and imidiatli put it in ice cold water the thermic choc willl cut the hotle wher the rope was surounding tue botle (sorry form my lauzy english ^.^)
Your videos are amazing man, found your channel today and went through it watching so many of your videos. Sometimes people would kind of critisize you as your English is very good, just not 100% but you're an amazing youtuber. Keep it up! :)
Awesome video! Just a little suggestion of a method I've used before :D I tied a rope around the bottle around the point where I want it to cut off.... Then pour vodka (or any alcohol I believe) and light it up.... Do this out door though.... And stand back.... About 10-20 secs later it should just pop off.... Let it cool, then sand it like you did :D
An easier (and more fun) way is to take a hair tie and douse it in rubbing alcohol. Then, put the hair tie on the bottle where you want to make the cut. Light the hair tie on fire for about 10 seconds and then (while still lit) submerge the glass in ice cold water. The drastic change in temperature splits the glass wherever the hair tie was. And then sand it down and you are ready to go!
uneven washing with hot/cold makes it crack unevenly, recommend you use 2 bucket hot/cold water and dip the wine bottle head in and out. Btw, without bottle cutter, you can use thread wrapped with alcohol to burn a similar circular line and dip into cold water to crack it, u will get same results without paying anything.
Hey crazy Russian hacker you can also cut a bottle with string acetone & cold water. Tie the string around where you want to cut after soaking it in acetone, then light it on fire & keep spinning it so the fire burns it evenly until it goes out. After that put in a bath of ice water & the stress from the temperature Chang will cause it to crack where the string was. Warning the bottle may implode or shatter if heat isn't distributed evenly. I hope you can do a video on that someday you are really cool & keep it up.
I seen one where he ties string around it and puts the string on fire and then just puts it under cold water and it comes apart. I like that glass that is all swirled up haha. Great hack.
I found an easier way to cut it is to give it one pass on the bottle cutter(don't cut over lines, just once), get some boiling water, pour it slowly on the cut while rotating for about 10-15 secs, and then immediately pour or dowse in cold water while rotating. I have about a 9/10 success rate with this method.
easier way to break off the glass: use a rubber hammer. that's how we did it in art class when we made stained glass. that little defect could have been broken off that way. you don't SMASH the thing with the mallet, you gently tap-a-tap along the scored line and then it just breaks right off.
try the brazilian style, put some water at the point that you want, and put a cotton string outside at the same water height, tie the string and burn it. The string will burn and the glass will cracked at the water height, so smooth the edge with fire its a good idea.
There's an easier way to do this! Take a string, soak it in 91% isopropyl alcohol, tie it around the bottle at desired height, light it on fire. Let it burn for a bit, then extinguish it by dipping into cold water. The shock of the temperature change will break the glass evenly along the string. Then sand it down to make it safe
It's generally easier to cut all the way around the bottle once while applying a lot of pressure, then use a lighter to heat all the way around the crack. Immediately afterwards, dunk it in water with ice and it should crack cleanly. o3o It's also faster if you're making more than one at a time.
Of you could do it the simple way.... Soak a piece of yarn in a flammable liquid. Then tie is around the desired spot. Making it as straight as possible. Light the yarn with a lighter. Then quickly put the bottle in ice cold water. BOOM! I'm surprised he didn't show the more common method.
Dude ur so fkn awesome i always watch ur vid in night time cuz i always get bored and almost fall asleep at ur vids! Ty man! U should make this a lifr hack and call it "Hiw to sleep better"
If you cant find a bottle cutter, you can use a string thats dipped in oil snd light it up on fire for a sec, then dip it in ice cold water, then it should split the bottle in half on where you put the string
"google it on Amazon"
- CrazyRussianHacker 2015
Is it weird that I actually tried to so it
Do*
LMAO
Suffy Wuffy OMG JUST REALIZED THAT HAHHAHA
Suffy Wuffy Bhaha! Omg I just realized he said it!! xD
Don't cool it first... put the bottle in the hot water for a couple of seconds, then run just a little cool water over the scratch. It will pop apart. Use a propane torch to to smooth the edge, and allow it to cool slowly.
I used your technique and my mom is now gurgling her own blood in her mouth from the glass shards.
Jared Garrison Nice!
Jared Garrison i devised my own technique, i did it all the CRH way but it broke so i got one out of the cupboard instead and i was done!
askjerry Dammit I tried again and when I used the blowtorch it heated up to quickly and now my dad has glass in his eyes.
askjerry eather or i don't see a big deal with come first lol and torch might overheat the glass and crack it.
3:46 "Luke is not polished yet."
Loooool
He said "Darker look is not polished yet"
***** haha Luke
Jack Kluchinski yea but it sounded like he said Luke
Haha😂
Safety is number one priority , touches blade
bigGisnumber1 he is not gonna lose his hand for touching a blade -.- damn children
No. Its not programmed to just cut glass. It doesnt have a mind of its own. I dont see how it can only cut glass...
bigGisnumber1 "glass blade knife" can't cut skin..
Who else remembered ThreadBanger? 😂
Me
When I saw this video I thought "what did rob do wrong?"
Omg me
Who needs fire just go and buy yourself a bottle cutter
Rob always cuts himself
"We're basically cutting it with science" -CrazyRussianHacker 2k15
😂
Bruh I think you mean 2015 not 2K15
For SCIENCE!
"K" means thousand so 2k15 is just another way of saying it 😂
bhavjot cheema "K" Means thousand.
99% of the people watching this dont even try doing this
[WaCp] TheFighterFox How can you be so sure your statistics are correct?
oh please did you try it? mostly like 20 people try this out of all the people watching
I tried this this
I tired this too!
Me to
Under 301!
Fast ,think of a poem...
Roses are red,
Kylie Jenner is blue,
You have one mama,
I have two.
I fucked that up
Felix Schoe Not funny.
Hahahahaha
So basically your moms are lesbians?
Gia Giarod no its not thou don't know
Ben Wheeler you don't know
Who else just watches DIY videos for fun and they don't actually make anything? I know I do...
I do... and I am not ashamed to admit it.
Regina Ashurova I do :)
Mbruh dont expose the secret
Lol i do
Lollipopx girl16 I do, mostly to critique how people do things I already know how to do better. However, I do find a few that teach me better ways, and I appreciate & adopt them. CRH I just find entertaining for his presentation.For what it would take to get good enough at the technique shown here not to waste a lot of $ & get cut a lot, I think I'd rather learn to BLOW glass!
"Look like awesome this glass look like"
-CrazyRussianHacker 2015
5:21 "Fill up my glass with my Breverage" I assume your "Breverage" will be Vodka xD
Lol XD
Even though the first bottle was not perfect, you probably could have used pliers to snap off the remaining piece cleanly, then wet sanded the entire cut area. You do realize the abrasive paper you used is not wet/dry paper. Using regular sandpaper with water will make all the abrasive fall off in no time. The clear spiral glass was very nice.
You can also fill the bottle with hot water, then pour the cold water on the outside
what... I just picked up that same bottle cutter and have been using it today. Good timing!
Lol just like me!!
Lol same here
Whaz up ebryboday? Welcum back to m labatore
Doth thou's mother know that thou's grammar is poppycock?
Wher seyfty is number one pioriti :DDD
Go home Linda! You're drunk!!
I didn't come down to the comments section just to see weak pull out game
Linda Kwon "now look like awesome this glass look like" 4:42
I've worked with stain glass in the past and was going to say your first attempt could probably be saved because it is scored. You just need stain glass pliers. Probably not the official name but you can look it up. Love the swirled glass. Great ideas!
Hi (Sorry for bad Russian)
?
Gia Giarod !
XD 😂😂everyone on the internet now.
***** HAHAHAHA so true!👍
Tehzombie1337 certainly
Wow. This guy really loves bottles...
CRH:How to make a glass out of a beer bottle
Me: cool cool
CRH: So what you need is a bottle cutter
Me: *facedesk*
I like how you show the bloopers kind off like when it doesn't properly succeed, that's why I love this channel as for it shows that everything won't go perfect at first unless you keep trying
4:41
"Luke like awesome this glass luke like"
-_CrazyRussianHacker_
These are awesome glasses
If you soak a cotton wire in gasoiline, bind it across the bottle, light it on fire keep it sideways and turn so the fire touches all around the cutting line. then put the bottle in a bucket of cold water, the cold makes a perfect cut in the bottle.
It's 1am here in Germany and I am watching a Russian man saying boom and shows us how to make drinking glasses. K.
This also works by wrapping a cotton cord around a bottle, make sure it goes even around the bottle and has a firm knot. Then soak the cord in benzine, alcohol, acetone, nail polish remover or other flammable solvents you happen to have at home and light it on fire. Spin it a little around while the solvent is burning. When the flame is almost burnt out, cool the bottle quickly with cold water. Now you should be able to pull the bottle into two even cut pieces.
Kids in Africa could have eaten that bottle...
They still can
Anas .R Or drank the water he wasted...
=(
I like how you keep posting so often, keep doing what your doing, your videos are also really cool and interesting!
At 0:18 "Just Google it on Amazon, EBay, Whateviar"
At 4:41 "Now Luke like awesome dis glass Luke like"
At 5:02 "Crazy Russian Hiker Facebuk"
At 3:04 "Feldoff"
At 3:46 "Luke is not polish yet"
At 0:35 "Hold up tightly my butthole"
Please leave him alone he is Russian he doesn't speak good English he is way smarter ,interesting,and fun than you. You are just jealous of his popularity and subscribers go to someone else's channel and do that or you could go in a corner and cry
This is amazing. 😂
I died when he said hold tightly my butthole
Although, he makes grammar mistakes,he still has about 4000000 subscribers.
+Hello Kitty that's why he has so many subs because he is funny and a really cool dude and even better now he has a funny dog👻
Finally a life hack I already knew about! My dad has a bottle cutter and he made me a couple of these from beer bottles. Pretty cool, but honestly I never drink from them. They're just displayed on a shelf.
Yeah because everyone will buy a bottle cutter just to make a glass
Check out a you tuber named threadbanger and watch this video
Already subbed to him:)
***** it would be recyled anyway...
+I'm Elif - well I em no crazy nor russian either, but I too can gev tips foor life hacks. So if yu cannut buy bottle cutter, just drop eh rope in oil then tie it eround ze bottol, and light it on fire for eh fiu sekends. Then drop deh bottol in veery cold woder (with ice in it or somefeen) and it shuld cut itself purfictly at the part where the rope wuz tied. Oll yu haf tu doo now is rubbing every sharp bits of glass with sandpaper, and BOOM ! Yu gat yur glass done from deh bottol. Pritty koo', huh ?..
I'm Elif you can make them by just wrapping a piece of rope soaked in alcohol and lighting it up. then just put it in cold water
4:43 "naw Luke like asum this glas Luke like"
Nailed it
Try it with a lightbulb?
No?
I like these longer videos better than the really short ones that you do.
You can do it by puting a rope around the botle burnit up leav it burn and imidiatli put it in ice cold water the thermic choc willl cut the hotle wher the rope was surounding tue botle (sorry form my lauzy english ^.^)
You dont get such a clean cut though
Steven D Bos yes that works too. i did a video of that a while ago :)
Wow. I love this. Cool glasses from bottles. I really like that clear one you had and the blue.
0:35 "Hold up tightly my butthole." ~CrazyRussianHacker
When ever I hear
"Wassupeverybadyanwelcomebacktomalaboratory where safety is number one priority"
It makes my day haha nothing better
"google it on amazon"
Your videos are amazing man, found your channel today and went through it watching so many of your videos. Sometimes people would kind of critisize you as your English is very good, just not 100% but you're an amazing youtuber. Keep it up! :)
pls tell us how to make DIY C4
put four carbons in a pan
Get 4 Gas Tanks, and light it with a match. Then you get red explosives.
DIY C4??
I call it an Improvised explosive device?
Allahu akbar
David Mystic + 10 internet score
orrrrr you can go to a store and buy the cheapest glasses there for like two dollars.... but I like the idea
Cool you recycle and yoyr voice is nice
the whole time i was waiting for him to say"perfect for dogs too" and to bring out his huskies
peety amayseen hoh?
Super Johnny It seems you have upset a lot of people on the Sataru Iwata death page...why is that?
Jordan Jones lel
Super Johnny Who is lel? is that a friend of yours?
Its funny how a lot of people are complaining about him and his projects in the comments. This an awesome DIY too!
Awesome video! Just a little suggestion of a method I've used before :D I tied a rope around the bottle around the point where I want it to cut off.... Then pour vodka (or any alcohol I believe) and light it up.... Do this out door though.... And stand back.... About 10-20 secs later it should just pop off.... Let it cool, then sand it like you did :D
I like the clear, rippley one, awesome!
Probably my favorite DIY ever that is awesome
An easier (and more fun) way is to take a hair tie and douse it in rubbing alcohol. Then, put the hair tie on the bottle where you want to make the cut. Light the hair tie on fire for about 10 seconds and then (while still lit) submerge the glass in ice cold water. The drastic change in temperature splits the glass wherever the hair tie was. And then sand it down and you are ready to go!
This is actually such a cool and useful project, great vid as always Taras
uneven washing with hot/cold makes it crack unevenly, recommend you use 2 bucket hot/cold water and dip the wine bottle head in and out. Btw, without bottle cutter, you can use thread wrapped with alcohol to burn a similar circular line and dip into cold water to crack it, u will get same results without paying anything.
Those look just as good as the ones in the store.
It works better to "turn towards me" when blade is towards you as well. This causes more pressure to be placed on the glass while cutting.
Hey crazy Russian hacker you can also cut a bottle with string acetone & cold water. Tie the string around where you want to cut after soaking it in acetone, then light it on fire & keep spinning it so the fire burns it evenly until it goes out. After that put in a bath of ice water & the stress from the temperature Chang will cause it to crack where the string was. Warning the bottle may implode or shatter if heat isn't distributed evenly. I hope you can do a video on that someday you are really cool & keep it up.
That is super neat! I better try that. Thank you for the awesome video
"Look like awesome this glass look like" -Crazy Russian Hacker
Can I just say I love you mr russian hacker. Your so creative & fun to watch. Love the bottle idea!
Crazyrussianhacker i love your life hack and experiment videos. They are fun to make
Plz dont stop :DD
I seen one where he ties string around it and puts the string on fire and then just puts it under cold water and it comes apart. I like that glass that is all swirled up haha. Great hack.
Nice good thing I have a bottle cutter it's good to know that there a very good purpose for it.
I really liked cutting bottles before but what i like even more is cutting them WITH SCIENCE!!
"It look like awesome, this glass look like."
Thats actually really cool 😌
Really good video. Will try this out with your string and fire technique.
I found an easier way to cut it is to give it one pass on the bottle cutter(don't cut over lines, just once), get some boiling water, pour it slowly on the cut while rotating for about 10-15 secs, and then immediately pour or dowse in cold water while rotating. I have about a 9/10 success rate with this method.
You are so creative!!👍👍👍👍👍👍
Aloha Talas, your new glasses can also serve as a Tea candle holder. It's very pretty when lighted.
easier way to break off the glass: use a rubber hammer. that's how we did it in art class when we made stained glass. that little defect could have been broken off that way. you don't SMASH the thing with the mallet, you gently tap-a-tap along the scored line and then it just breaks right off.
That was actually pretty cool
try the brazilian style, put some water at the point that you want, and put a cotton string outside at the same water height, tie the string and burn it.
The string will burn and the glass will cracked at the water height, so smooth the edge with fire its a good idea.
"I'll show you how to cut a bottle[...]."
"Use a bottle cutter!"
NO WAY! I DIDN'T EXPEXT THAT. WOW!
about the polishing part, if you go in complete figure 8's, you'll have more even pressure and a better sanding experience all around.
Keep up the good work!!
There's an easier way to do this! Take a string, soak it in 91% isopropyl alcohol, tie it around the bottle at desired height, light it on fire. Let it burn for a bit, then extinguish it by dipping into cold water. The shock of the temperature change will break the glass evenly along the string. Then sand it down to make it safe
I cut several bottles after watching your video. Sent a pic to your facebook. Thank you for your videos!
It's generally easier to cut all the way around the bottle once while applying a lot of pressure, then use a lighter to heat all the way around the crack. Immediately afterwards, dunk it in water with ice and it should crack cleanly. o3o It's also faster if you're making more than one at a time.
Of you could do it the simple way....
Soak a piece of yarn in a flammable liquid. Then tie is around the desired spot. Making it as straight as possible. Light the yarn with a lighter. Then quickly put the bottle in ice cold water. BOOM!
I'm surprised he didn't show the more common method.
Dude ur so fkn awesome i always watch ur vid in night time cuz i always get bored and almost fall asleep at ur vids! Ty man! U should make this a lifr hack and call it "Hiw to sleep better"
If you cant find a bottle cutter, you can use a string thats dipped in oil snd light it up on fire for a sec, then dip it in ice cold water, then it should split the bottle in half on where you put the string
The thing is that if you drop that, it will break quite easily, but the ones that are made for long term use drinking glass, don't break easily.
Good call on washing it before using it. I would've just drank from it and ruined my throat. Very cool hack
Great Video ! Thanks for sharing !!
I seriously love this guy 😂❤️
Omg those cups do look kewl :)
In America Google Amazons you.
In Soviet Russia Amazon Googles you.
Thanks! That seems like a great gift idea. I just won't sand them down
"Now look like Awesome this glass look like" 4:43 WTFF? 😂😂
Nice. Gotta try this one day. Thank you
I enjoy your videos… you are an awesome guy! Thanks my friend!
Very cool. Thumbs's uppp.
You are great!! Gongrats from Brazil
U could cleanup the top part and use it as a funnel!!!! 👍
4:43
"Now it look like awesome it look like."
-CrazyRussianHacker 2015
I feel like I could do this as housewarming gifts.
That so cool and creative!
love your DIY videos
ThreadBanger you NEED to try this again!👏
If you don't break the top part you can use it as a nice wine glass. Bit big for that purpose, but perfect for alcoholics.
Man that glass thing is cool you are so awesome I always watch your videos
All these people hating on him for his accent, but can you speak a different language? If you say yes, you're ashamed of people hating.
I'll keep this in mind for the next glass shortage.