Cheers for taking the time to chuck these videos together mate, and keeping it authentic with no bullshit. True representation of what we get up to in the shed, struggles of ability and what gear we have available and it's so relatable. Love to see how your adapting and gotta give yourself plenty of credit as doing a killer job! Keep it up bro
Appreciate the quality, honesty and no fuss style of your videos Timmy! Don’t even own a Ute and I’m invested in watching yours come along because you make them so relatable, without leaving out details 🤙🏼
Nothing better than watching some quality Timmy content on a Sunday morning, rippa job fella , remember everyone is human and make mistakes besides your workmanship is top notch 👌
More awesome content. You've done the right thing to walk away from the problem and return to it with a rested mind, fresh energy and consultation with peers. Add in the filming aspect - you're nailing it. Looking amazing!
Yeah dude I’m not very good at walking away to be honest, my usual go to is to keep at it until I’ve really dug myself a hole haha. But tried to walk away and relax and ask for help, and I’m glad I did. Filming is tough dude, putting yourself out there but I enjoy it 🙏🏻
Sunday morning watching this build. Love the custom approach, and you attention to detail, even if it means redoing a job. Great work ethic mate. TC Boxes for the win.
It really does dude, more than people even realise haha. Especially then to film and edit and upload and what not. It’s a bunch of work for sure but I love it
Just found your Chanel and enjoyed this video, will definitely be going back to the start. Love that you walk away to think through the problem when you stuffed up and gave yourself a chance to come up wth the right solution. Young folk should take note to that!
Thanks brother, appreciate you man and yeah I think any smaller might have been a bit pointless so hopefully it still wheels okay being a bit bigger 👍🏻👍🏻
A tip I got from a powder coat shop on fixing weld or grind defects is to use JB weld and apply it like its bondo/ bog to smooth it out. Give it a good sand/ gentle flap disk afterwards and it will look perfect.
Yeah I have thought about that, and like I think I saw Sam Eyles use like a metal tech filler before too? But also like at the end of the day this thing is gonna get whacked against every tree from here to the tip so I need to manage expectations a bit too haha
Great work, really like what you are doing and hearing your thought process and yes it takes a little bit of extra time in the video but that's ok. the way you are doing the bar work around the canopy, really nice idea.
Killing it mate, both with the fab and the content It’s been said time and time again You, tjandmac, uncle pooly and TT are at the peak of aus 4wd youtube
Love your work mate. Great idea putting the cage around the canopy. I've seen a lot of guys ding them. I imagined doing a similar thing to protect doors, then remove them once on the black top.
Sick video mate! One thing to help with the low spots is instead of having just the sanding pad put a piece of a scotch pad or just something as a buffer. It helps and it's a cheap and easy solution!
Yeah definitely 100% I just don’t think I have the patience, like you at least have to begin with a sand pad to bring the weld down, and then I should probably move to a orbital or something. Thanks for the tips mate 🙏🏻
Great work. Planning and design are as important as build. Again great work. When you discount your ability, don't underestimate your determination to achieve the result you want. Really nice build mate.
Yeah for sure dude, I always struggle to explain because I don’t actually mean to fake modesty or put myself down either it’s just like real type thing, appreciate it dude 🙏🏻🙏🏻
Gday Timmy, awesome to hear TC Boxes have jumped on board, there bloody popular now and seen quite a few down my way, I felt your pain when you worked out there’s was a mistake with the mount and nice way of working around it, top job mate, cheers
Oh dude absolutely killed me haha. Yeah I’ve always liked TC boxes, super affordable and simple, no BS. As I say I was already bending up my headboard to the shape on their website before I’d even ordered it. 😅
Mate your attention to detail is 👌 But it's the classic tale of 'many artist are their own worst critic' Non the less it's coming together nicely! Keep layin down the bead 🤙
Thanks so much dude, this one tested me for sure, and as I get closer to finishing it the stakes get higher if I screw something up, but you’re right I’m super critical of my work, particularly like when putting it online and that. But yeah appreciate the kind words 🙏🏻
I just love the videos you post... every bloody video is full of info without all the mumbo jumbo bullshit 😂 also I'm sure we can all agree that a proper functional tray is better then a tray built for looks that isn't usable
I really appreciate that mate, especially considering I actually think I start waffling on a bit haha, but no complaints yet to talk less so I only tend to cut the useless waffle. And yeah I tried to have a blend of nice looks but functional, so keen to see it done sick of staring at it in the shed haha.
That weather we had was fucking wild, I run a bale away business in launny and we’ve carted away 15t of tree heads already. I stopped calculating trunks and big limbs 🫠 Anyways, another wicked video mate. It’s gonna do a lot for all the young blokes out there when you go through it all step by step and work through the problems. Was good seeing the big GQ around town too 🤙
Oh wow you’re joking? I know dude dead set there is 5 routes between me and my mates place and 4 of them had trees over them a few weeks back, was absolutely insane, I’ve never seen winds like that in all of my life here in tassie. That’s what it’s all about my man, I really really really love sharing, and hope it helps some people. Thanks for watching 👊🏻👊🏻
@@timmyhasheart nah dead set, we tallied up all the receipts from the tip and it came in at 15.3T, I’ve taken 12 car trailer sized loads ( stacked 4 ish logs high) of limbs ect out to the farm, I don’t even think the west coast cops it that bad. it was interesting drive through the tracks in the plantations this weekend with all the downed trees. you keep producing the goods I’ll keep supporting the Local legend 💪🤘give us a bloody patreon or something already 😉
Awesome vid again, Timmy. New name for the channel..."Timmy's BigCartel"...Great Easter Egg Bro. Hahahahaha 😂😂. Spent the day working on my GU. Your stuff is great. 👍 👌
Another way of doing your rear headboard mounts could of machined a solid mild steel crush tube with thread, drill in into the RHS combing rail and welded it from the top in and bottom would be super solid and strong as hell 👌
Timmy - stop apologising. You'd have to be of the most "real" presenters. Luv the work, and luv the "real life" F up's involved, and how you recover from. Great work and keep up the ep's. Have never seen the bar across the mid of a canopy, with fold away. Will be keen to see how this works real life. Maybe setting a new trend
bloody oath she looks mint, can't wait to see the GU on the highway more often, also can't wait to see what trips you'll go on with her, anyway amazing video as always mate, keep up the great work legend 🫡
I can't believe you had to go to the states to buy the roll cage joiners. As a machinist with his own lathe and mill I think I may have found something to make at home.
Haha yeah I tried to find some locally, and honestly didn’t even think to have some custom made these were just available online, the cambergs I just got from Kinsela but these ones in particular I miss spoke they’re actually roll cage hinges, not joiners. Cheers 👊🏻👊🏻 next time might have to get you to whip some up 🤣
Na so I built the first tray which was 50mm wider, then I put 2 lights on it and it looked stupid so I changed to 3 lights because the space was large where the lights went and the space needed to be filled.. Which looked great I liked it, but then as time went on I realised the whole tray was just too wide all in all. So I sold it and started again, and in the second tray, I made the light area narrower in order to fit a drawer in the centre and so I could no longer fit 3 lights 👍🏻
Thanks so much mate 🙏🏻👍🏻 I don’t actually but it would be awesome to know, I know with the last steel tray I built it was 2.5t all up and that was using thicker steel, I’ll weigh it during engineering so I’ll be able to know the car weight at least
Dunno if it would work but .... slot each side or the RHS leaving the top surface original, slide the plates in from the side and weld them in from each side so the plates sit underneath the top surface of the RHS then drill and tap down from the top and into the plate to leave a flush surface for the roll bar to mount to. ???
Yeah dude that’s a brilliant idea, dead set Kistler said a similar thing, slot it in from the inside, and 6 holes drilled above and plug weld from the top and sand flat, and I should have listened but I didn’t really understand the suggestion until I was like finished haha, appreciate the suggestion dude that’s a great idea
Looks tuff as, did you think about mabey drilling to oversized holes straight through the rail getting some crush tubes machined to fit in and a thread tapped in in them and them just tig them top and bottom so there fush ??
Brooooo that’s a brilliant idea.. I had considered crush tubes going all the way through but then having a nut on the bottom, but then you’d see the nut and the tyre might flex into it, then Kinsela also suggested having a counter head bolt go from the bottom through to the top and have the nut on top, but never considered having a threaded boss.. I should come and ask my audience more often haha. Been a couple of good suggestions in here. Appreciate it man. 🙏🏻
Absolutely aware of that haha, no one calls it SHS but, even my fab mates we all just call anything with 4 sides RHS, appreciate the feedback but hopefully you can look past it cause never gonna be able to retrain my brain I’m afraid 🤣
Hey Timmy the builds looking sick, just wondering what the 5 link is like to drive on the road? I love the adjust ability and flex they give but don't want to sacrifice on road feel a lot.
Thanks mate 🙏🏻 I never did a RUclips video based solely on going to the cape, I did do a video early on that included some of the trip I did with mates. The video thumbnail is “not your average rig rundown” and it’s a life story of the GQ. But I started doing RUclips after that trip so didn’t really film it
@@timmyhasheart might have been on tylers channel. But I swear ive seen it. The white wagon. Done every hard track up and back down the east coast. you and tyler in the high country on your way home. Allgood. Keep on living the dream brother. Love the content every week
I do love and trust rivnuts, a lot.. but yeah maybe not for something that I’d like to hold up to tree strikes and side impacts and holding my spare etc. also have to think about safety on the road like I’d never want anything coming off and hurting anyone, but they probably would do the job, until they didn’t haha
Yeah not a bad idea just a little annoying like if I wanna remove panels to access exhaust or batteries or something hey, the foam strip worked alright on my first tray 👍🏻👍🏻
Fuck, you took that well, from not wanting to do it, too having to and getting burnt in the process, to find out you messed up a measurement, I would have never looked and that tray again and been a complete sook 😂 real life shit this I why I watch, another banger video 👌👌
Oh mate trust me there was some tantrums and a couple of mates copped full sook mode over the phone haha, namely Matt and Drew 😂 3 solid screw ups in like 1 process, wasn’t happy, appreciate it dude 🙏🏻
@@timmyhasheart I feel like Drew’s the lowkey superman behind the scenes that can fix stuff 😂 we all need a mate like that 👌 the kingcrome drill bits have got my tick too 👍🏼
@jackholliday5236 yeah I did see that, fkn love pooly so bad man absolute legend, yeah it’s not the winch I have but I did suggest it, he was basically looking for the quickest low mount on the market, I’m keen to see how it goes!
Yeah dude for sure, it’s hard not to go a bit silly with details when you’re posting it to thousands but haha. But I get what you’re saying, don’t worry it’s still gonna get smacked against rocks and trees 😂😂
Hey mate quick question, is it worth adding that roll cage joiner on an angle slightly so the bar that protects the canopy will fold upward on the same angle as the head board? To save it getting in the way when it’s open, or will that not work? Love the videos man
My bad haha, the bar that you’ve got going along the canopy doors with the roll cage jointers (that you imported)yet to go in, that will swing out to access the canopy, if it can swing upwards to keep out of the way when your in the canopy
@@liamburgess6608 yeah I thought that’s what you meant, so there is only 40mm of canopy wall thickness, and if I had it go straight up, then at a minimum, in its complete upright position it’ll be the thickness of the tube which is 48 so it’ll impede the door, but you’re right it would be way better swinging up, I’ll have a play with it I might be able to latch it in some way to have it stay out of the way on any angle 👍🏻👍🏻
@@timmyhasheart ahh yeah that makes sense, kind of governed of the tube thickness, no worries mate looking forward to what you come up with, learn a lot from your videos man, love the content
@liamburgess6608 I truly do appreciate the ideas and input also man always open to it so always sing out if you have ideas like that they’re all welcome 🙏🏻
Like the videos but ive stopped watching all of them and started picking and choosing vidoes to watch The band name dropping is annoying And the loud music is annoying aswell
That’s alright man that’s the way RUclips should work I appreciate you just tuning in to the ones you wanna watch 🙏🏻🙏🏻 And thanks for the music feedback, it’s tough I get so many compliments on it but then lately the odd one or two that don’t like it, I kinda just try make stuff I’d watch but also obviously want it to be enjoyable for others too. Hard to please all the viewers, we’re all so different. As for the band name stuff I dunno what you mean if you could explain? Thanks for the feedback dude 🙏🏻
@@timmyhasheart yeah I really liked watching the videos before kingchrome and the other sponsors come on board it seemed to explode over a few months going from Aussie arvos type videos to no wasted weekends videos Don't really know how to explain it in a comment Just my opinion your track videos I allways watch them
Na dude all good I honestly appreciate the feedback, I do need help from brands to keep videos coming out and keep parts coming in etc, and builds moving along. Being a dude with a day job, mortgage, 2 cars, expenses etc. it really helps having a hand from brands. I do legitimately only work with brands I’d either use anyway, or was using already, I’m a long time customer of road runner, Kincrome, superior, would hate to know my total spend at these places haha and while being in the background and what not I do try to only talk about them when I think it’s relevant, but I also understand where you’re coming from. I do look heavily up to Mac & TJ & Pooly etc. too so I guess that comes through in my editing style. But appreciate you like the trip videos cheers dude, there will be more of those coming soon. 👍🏻
Another banger brother bro I has the best idea you should make welding jackets like hoody jumpers bro. And put your brand over them to sell or any welding company's out their looks to sponsor our boys @timmyhasheart would be mad as poor fella hahhaha your a legend keep up the good work
Hahaha not a bad idea, hurt so bad but it was my own fault I should have been wearing a glove, but wasn’t even welding I was just grinding, not paying attention to where my sparks were going 🤣
@timmyhasheart true that bro hahahaha we have all been once or twice hahhaa. And 💯 you should start doing mad merch drops I don't normally bye anything like that butt if u did I would get something again love your content keep them coming
I like patrols when timmy builds them 🥰
Haha ditto for cruisers my man 🙏🏻🙏🏻🙏🏻
Cheers for taking the time to chuck these videos together mate, and keeping it authentic with no bullshit. True representation of what we get up to in the shed, struggles of ability and what gear we have available and it's so relatable. Love to see how your adapting and gotta give yourself plenty of credit as doing a killer job! Keep it up bro
Definitely some struggles been had out there and the cameras been switched off haha, appreciate the kind words mate stuff like that keeps me going 🙏🏻
@@endotasweegin6613 100 percent
Love the use of the cage door bar swing aways to protect the canopy dude.👌
Thanks brother, had to get the idea out of my head, probably more practical to replace a door but it’s been fun to learn at the least haha
Appreciate the quality, honesty and no fuss style of your videos Timmy!
Don’t even own a Ute and I’m invested in watching yours come along because you make them so relatable, without leaving out details 🤙🏼
Appreciate you dude thank you 👊🏻👊🏻
Trays coming along nicely. Always look forward to updates.
Good improvising with the rear bar muck up👌
Killed me dude haha, cheers 🙏🏻🙏🏻
Well done Timmy and as always you persevere through adversity. Thanks for sharing. Cheers
Trying mate! Cheers 🙏🏻🙏🏻
Nothing better than watching some quality Timmy content on a Sunday morning, rippa job fella , remember everyone is human and make mistakes besides your workmanship is top notch 👌
Trying my best dude! Appreciate the kind words thank you 👊🏻
@@deanwass5058 100 percent
Looks great Tim. Always appreciate how you give your rational for the decisions you make. Really helps in understanding what you are doing. Cheers.
That’s awesome mate thank you, until someone tells me to shut up I’ll keep waffling on 🤣
@@timmyhasheart Waffel at your leisure!!
More awesome content. You've done the right thing to walk away from the problem and return to it with a rested mind, fresh energy and consultation with peers. Add in the filming aspect - you're nailing it. Looking amazing!
Yeah dude I’m not very good at walking away to be honest, my usual go to is to keep at it until I’ve really dug myself a hole haha. But tried to walk away and relax and ask for help, and I’m glad I did. Filming is tough dude, putting yourself out there but I enjoy it 🙏🏻
Sunday morning watching this build. Love the custom approach, and you attention to detail, even if it means redoing a job.
Great work ethic mate. TC Boxes for the win.
Thanks so much dude appreciate it 🙏🏻🙏🏻
awesome work Tim, the bar work around the canopy looks great, a lot of thought goes into these builds top work Tim
It really does dude, more than people even realise haha. Especially then to film and edit and upload and what not. It’s a bunch of work for sure but I love it
Just found your Chanel and enjoyed this video, will definitely be going back to the start. Love that you walk away to think through the problem when you stuffed up and gave yourself a chance to come up wth the right solution. Young folk should take note to that!
Appreciate that mate thank you and thanks for going back to check out the earlier stuff 👍🏻😅
Looking good Timmy, canopy looks like the perfect size as well, fits what you need without taking up all the tray space.
Thanks brother, appreciate you man and yeah I think any smaller might have been a bit pointless so hopefully it still wheels okay being a bit bigger 👍🏻👍🏻
A tip I got from a powder coat shop on fixing weld or grind defects is to use JB weld and apply it like its bondo/ bog to smooth it out. Give it a good sand/ gentle flap disk afterwards and it will look perfect.
Yeah I have thought about that, and like I think I saw Sam Eyles use like a metal tech filler before too? But also like at the end of the day this thing is gonna get whacked against every tree from here to the tip so I need to manage expectations a bit too haha
What a build love it in my eyes almost the perfect tuff tourer. Good to see some one genuine and honest about skills and mistakes 👌👌
Thanks heaps my man, will always be totally honest about mistakes and learning opportunities dude! Only way to be 👊🏻👊🏻
Great work, really like what you are doing and hearing your thought process and yes it takes a little bit of extra time in the video but that's ok. the way you are doing the bar work around the canopy, really nice idea.
Cheers mate appreciate the feedback! Thanks for watching 🙏🏻🙏🏻
Timmy, this video, like all of your videos, shows that your chanel is one of the best out there. Keep up the amazing work.
Thanks so much mate, trying my best 🙏🏻👍🏻
Killing it mate, both with the fab and the content
It’s been said time and time again
You, tjandmac, uncle pooly and TT are at the peak of aus 4wd youtube
Legend mate thank you, an honour to be on that list with those boys, love em all 👍🏻👍🏻
Love your work mate. Great idea putting the cage around the canopy. I've seen a lot of guys ding them. I imagined doing a similar thing to protect doors, then remove them once on the black top.
Thanks dude!! It started out as a good idea but it’s kinda haunting me now haha, probably easier to just replace canopy doors 😂😂
Sick video mate! One thing to help with the low spots is instead of having just the sanding pad put a piece of a scotch pad or just something as a buffer. It helps and it's a cheap and easy solution!
Yeah definitely 100% I just don’t think I have the patience, like you at least have to begin with a sand pad to bring the weld down, and then I should probably move to a orbital or something. Thanks for the tips mate 🙏🏻
Great work. Planning and design are as important as build. Again great work. When you discount your ability, don't underestimate your determination to achieve the result you want. Really nice build mate.
Yeah for sure dude, I always struggle to explain because I don’t actually mean to fake modesty or put myself down either it’s just like real type thing, appreciate it dude 🙏🏻🙏🏻
I'm loving your channel Timmy, you are a craftsman and it shows. Keep up the great work!
Thanks so much dude 👊🏻👊🏻👊🏻
Gday Timmy, awesome to hear TC Boxes have jumped on board, there bloody popular now and seen quite a few down my way, I felt your pain when you worked out there’s was a mistake with the mount and nice way of working around it, top job mate, cheers
Oh dude absolutely killed me haha. Yeah I’ve always liked TC boxes, super affordable and simple, no BS.
As I say I was already bending up my headboard to the shape on their website before I’d even ordered it. 😅
I learn more every time I watch your videos mate love it, thank you 🙏
Love to hear it mate thank you 🙏🏻
@@timmyhasheart you’re gonna cost me a fortune 😂😂😂
Looking good Timmy.👍 Build is looking smick. 💯
Cheers brother 🔥🔥
Them kincrome step bits look impressive
Yeah they work awesome dude, super impressive I usually melt them 😅
Bloody good job of fitting the plates in 👍
Cheers dude, took its toll on the old melon I tell you that now 😅
@@timmyhasheart 👍👌
Mate your attention to detail is 👌
But it's the classic tale of 'many artist are their own worst critic' Non the less it's coming together nicely! Keep layin down the bead 🤙
Thanks so much dude, this one tested me for sure, and as I get closer to finishing it the stakes get higher if I screw something up, but you’re right I’m super critical of my work, particularly like when putting it online and that. But yeah appreciate the kind words 🙏🏻
I just love the videos you post... every bloody video is full of info without all the mumbo jumbo bullshit 😂 also I'm sure we can all agree that a proper functional tray is better then a tray built for looks that isn't usable
I really appreciate that mate, especially considering I actually think I start waffling on a bit haha, but no complaints yet to talk less so I only tend to cut the useless waffle. And yeah I tried to have a blend of nice looks but functional, so keen to see it done sick of staring at it in the shed haha.
That weather we had was fucking wild, I run a bale away business in launny and we’ve carted away 15t of tree heads already. I stopped calculating trunks and big limbs 🫠
Anyways, another wicked video mate. It’s gonna do a lot for all the young blokes out there when you go through it all step by step and work through the problems. Was good seeing the big GQ around town too 🤙
Oh wow you’re joking? I know dude dead set there is 5 routes between me and my mates place and 4 of them had trees over them a few weeks back, was absolutely insane, I’ve never seen winds like that in all of my life here in tassie.
That’s what it’s all about my man, I really really really love sharing, and hope it helps some people.
Thanks for watching 👊🏻👊🏻
@@timmyhasheart nah dead set, we tallied up all the receipts from the tip and it came in at 15.3T, I’ve taken 12 car trailer sized loads ( stacked 4 ish logs high) of limbs ect out to the farm, I don’t even think the west coast cops it that bad. it was interesting drive through the tracks in the plantations this weekend with all the downed trees.
you keep producing the goods I’ll keep supporting the Local legend 💪🤘give us a bloody patreon or something already 😉
Quality content Timmy!!
Least you were honest about making the mistake with the cage mate..
You are only human bloke 👌
Always mate! This one just screwed with me over and over again, was tough 😅
Been waiting for a new GU ep to drop 🤙🏻
I’ve been struggling to find the time to work on it! Hopefully be able to put some work into it soon
@@timmyhasheart all in good time mate. Every video you put out is well worth the watch 🍺
Looking good
See you in the next one 👍
Cheers bro 👊🏻👊🏻😅
Awesome vid again, Timmy. New name for the channel..."Timmy's BigCartel"...Great Easter Egg Bro. Hahahahaha 😂😂. Spent the day working on my GU. Your stuff is great. 👍 👌
Haha first one that got to the end clearly 😅
Another way of doing your rear headboard mounts could of machined a solid mild steel crush tube with thread, drill in into the RHS combing rail and welded it from the top in and bottom would be super solid and strong as hell 👌
And that way ya not cutting any section out of the RHS and welding a huge section in
Yeah boi, cheers 👍🏻👍🏻 was mentioned in another comment haha it’s a great idea
There’s no doubt about you Timmy you definitely think of everything and then boom oh no 😢
You won’t go back after you’ve had a canopy 👍🏽
Haha ahh well we got there in the end, home stretch! Then engineering, then trips 🥵
NEW TIMMY VID!!!!!!! SUNDAY IS SAVED!!!!!! Another cracking vid mate, trays looking fukn nice as, cant wait to see in all done.
Thanks heaps mate 🙏🏻🙏🏻 same here 😅
Nice work timmy ripper job!
Thanks so much Mac, appreciate you mate 👊🏻
Timmy - stop apologising. You'd have to be of the most "real" presenters. Luv the work, and luv the "real life" F up's involved, and how you recover from.
Great work and keep up the ep's. Have never seen the bar across the mid of a canopy, with fold away. Will be keen to see how this works real life. Maybe setting a new trend
Haha righto dude thanks, and yeah was just an idea I wanted to get out of my head so gave it a go, will see how it comes out
It’s not about your cock ups, it’s about how you fix them.
The sign of a tradesman 👍
Fair call haha, thanks mate
Looking good mate, the canopy turned out great. Quick question, where are you gonna mount the spare tyre?
Thanks so much mate 🙏🏻🙏🏻 I’ll have a spare mount integrated into the rear tube hoop 👍🏻👍🏻
You are bloody clever mate!
Thanks mate, good mentors I think 👍🏻👍🏻
awesome vid, im 17 and urs vids are great inspo for my gu build!
Awesome dude thank you, cheers for watching 🙏🏻
bloody oath she looks mint, can't wait to see the GU on the highway more often, also can't wait to see what trips you'll go on with her, anyway amazing video as always mate, keep up the great work legend 🫡
Yeah she’s shackled to the shed now until it’s tray is painted and all the engineering is done but I’m so keen to take it on it’s first trip 🙏🏻
@@timmyhasheart any idea on where the first trip will be to? 🤔
@@NotARUclipsrAtAllabsolutely no idea mate haha, probably some hidden gems in Tassie to iron out some creases and then maybe the mainland
@@timmyhasheart hell yeah, that's what we love to see
Wicked channel Timmy😎👍
Thanks mate 🙏🏻🙏🏻
Favourite RUclipsr Timmy !
Cheers dude 🔥🔥🔥
Imperfections are just character building
That’s it mate! 🙏🏻
Fantastic, the good stuff does take time, looking good. What CAD are you using out of interest?
Thanks heaps mate, I borrow my mates computer to use it I can never remember haha fusion or something? If you hit me on insta I’ll try find it
I can't believe you had to go to the states to buy the roll cage joiners. As a machinist with his own lathe and mill I think I may have found something to make at home.
Haha yeah I tried to find some locally, and honestly didn’t even think to have some custom made these were just available online, the cambergs I just got from Kinsela but these ones in particular I miss spoke they’re actually roll cage hinges, not joiners. Cheers 👊🏻👊🏻 next time might have to get you to whip some up 🤣
@@timmyhasheart haha all good mate. I actually don't live to far from Kinsela (about 45 minutes) so I might whip a few up and get in contact
Thanks Timmy. Just wondering, any concerns about branches getting stuck between the bars and the canopy and maybe damaging it?
I hadn’t really considered it but definitely had it happen on the GQ, might be a deal with it when it happens job 😅
Awesome vid dude, I thought u went to 3 tail lights on this tray instead of the 2 like the last back your back to 2 again ?
Na so I built the first tray which was 50mm wider, then I put 2 lights on it and it looked stupid so I changed to 3 lights because the space was large where the lights went and the space needed to be filled.. Which looked great I liked it, but then as time went on I realised the whole tray was just too wide all in all. So I sold it and started again, and in the second tray, I made the light area narrower in order to fit a drawer in the centre and so I could no longer fit 3 lights 👍🏻
Great episode. Do you know what the final tray weight ended up?
Thanks so much mate 🙏🏻👍🏻 I don’t actually but it would be awesome to know, I know with the last steel tray I built it was 2.5t all up and that was using thicker steel, I’ll weigh it during engineering so I’ll be able to know the car weight at least
Dunno if it would work but .... slot each side or the RHS leaving the top surface original, slide the plates in from the side and weld them in from each side so the plates sit underneath the top surface of the RHS then drill and tap down from the top and into the plate to leave a flush surface for the roll bar to mount to. ???
Yeah dude that’s a brilliant idea, dead set Kistler said a similar thing, slot it in from the inside, and 6 holes drilled above and plug weld from the top and sand flat, and I should have listened but I didn’t really understand the suggestion until I was like finished haha, appreciate the suggestion dude that’s a great idea
Looks tuff as, did you think about mabey drilling to oversized holes straight through the rail getting some crush tubes machined to fit in and a thread tapped in in them and them just tig them top and bottom so there fush ??
Brooooo that’s a brilliant idea.. I had considered crush tubes going all the way through but then having a nut on the bottom, but then you’d see the nut and the tyre might flex into it, then Kinsela also suggested having a counter head bolt go from the bottom through to the top and have the nut on top, but never considered having a threaded boss.. I should come and ask my audience more often haha. Been a couple of good suggestions in here. Appreciate it man. 🙏🏻
@timmyhasheart my pleasure mate, it's what coment sections are for bouncing around ideas ! Keen to see the tray in paint going to be mint !!!
Hay Timmy
Its SHS not RHS.
Stands for " Square hollow section.
Sorry to pull up on this minor detail.
Love your content
Absolutely aware of that haha, no one calls it SHS but, even my fab mates we all just call anything with 4 sides RHS, appreciate the feedback but hopefully you can look past it cause never gonna be able to retrain my brain I’m afraid 🤣
@timmyhasheart
RHS stands for "Round hollow section.🤙
Hey Timmy the builds looking sick, just wondering what the 5 link is like to drive on the road? I love the adjust ability and flex they give but don't want to sacrifice on road feel a lot.
Honestly man I don’t take enough notice to tell you, the road is just a way to get Offroad haha
Another wicked ep in the shed. Quick one mate. How do i find your early GQ vids when you went solo to the cape. Cheers
Thanks mate 🙏🏻 I never did a RUclips video based solely on going to the cape, I did do a video early on that included some of the trip I did with mates. The video thumbnail is “not your average rig rundown” and it’s a life story of the GQ. But I started doing RUclips after that trip so didn’t really film it
@@timmyhasheart might have been on tylers channel. But I swear ive seen it. The white wagon. Done every hard track up and back down the east coast. you and tyler in the high country on your way home. Allgood. Keep on living the dream brother. Love the content every week
Yeah that was me it was my red and gold wagon it’s that video I explained above 👆 👍🏻😂
@@timmyhasheart thats the one cheers timmy. 🍻🤘
Canopy looks good. Have you payed Pooly yet?
Thanks matey 🙏🏻🙏🏻 paid Pooly? Wdym for the lights?
hey mate with mounting the rear bar, how come you didnt just drill 2 holes into the rhs and nutsert it?
I do love and trust rivnuts, a lot.. but yeah maybe not for something that I’d like to hold up to tree strikes and side impacts and holding my spare etc. also have to think about safety on the road like I’d never want anything coming off and hurting anyone, but they probably would do the job, until they didn’t haha
Hey Mate, looking the goods. What size is your shed?
9x12 pretty sure mate
3M heavy duty double sided tape 👍 it won’t come off
Yeah not a bad idea just a little annoying like if I wanna remove panels to access exhaust or batteries or something hey, the foam strip worked alright on my first tray 👍🏻👍🏻
@@timmyhasheart yeah that’s true, did you just foam the rhs
Yeah on the first one, haven’t done this one yet, works well too cause it kinda takes up the gaps that the head of the rivnuts leaves 👍🏻
Fuck, you took that well, from not wanting to do it, too having to and getting burnt in the process, to find out you messed up a measurement, I would have never looked and that tray again and been a complete sook 😂 real life shit this I why I watch, another banger video 👌👌
Oh mate trust me there was some tantrums and a couple of mates copped full sook mode over the phone haha, namely Matt and Drew 😂 3 solid screw ups in like 1 process, wasn’t happy, appreciate it dude 🙏🏻
@@timmyhasheart I feel like Drew’s the lowkey superman behind the scenes that can fix stuff 😂 we all need a mate like that 👌 the kingcrome drill bits have got my tick too 👍🏼
@@timmyhasheart btw uncle Pooly just put out a vid and his just installed the winch you have and gives you a shout out, fucking killer winch tho 👌👌👌
@jackholliday5236 yeah I did see that, fkn love pooly so bad man absolute legend, yeah it’s not the winch I have but I did suggest it, he was basically looking for the quickest low mount on the market, I’m keen to see how it goes!
@@timmyhasheart yeah that’s true I didn’t even click, I’ve watched your winch videos though your is king hahah
Bro!! Nice editing with the music. ❤❤
I disagree that music is unbearable to me, i fast forward it. I would rather listen to a drill or grinder.
Haha thanks mate, and sorry Craig - can’t please everyone I just try making something I’d watch, but cheers for the feedback dude 🙏🏻🙏🏻
@@timmyhasheart No worries.
Don't be so hard on yourself! Remember it is a 4wd and not a show car right?
Yeah dude for sure, it’s hard not to go a bit silly with details when you’re posting it to thousands but haha. But I get what you’re saying, don’t worry it’s still gonna get smacked against rocks and trees 😂😂
Hey mate quick question, is it worth adding that roll cage joiner on an angle slightly so the bar that protects the canopy will fold upward on the same angle as the head board? To save it getting in the way when it’s open, or will that not work?
Love the videos man
I’m not sure I know exactly what you mean, but I’m open to ideas like I might just need it explained differently haha appreciate it dude 🙏🏻
My bad haha, the bar that you’ve got going along the canopy doors with the roll cage jointers (that you imported)yet to go in, that will swing out to access the canopy, if it can swing upwards to keep out of the way when your in the canopy
@@liamburgess6608 yeah I thought that’s what you meant, so there is only 40mm of canopy wall thickness, and if I had it go straight up, then at a minimum, in its complete upright position it’ll be the thickness of the tube which is 48 so it’ll impede the door, but you’re right it would be way better swinging up, I’ll have a play with it I might be able to latch it in some way to have it stay out of the way on any angle 👍🏻👍🏻
@@timmyhasheart ahh yeah that makes sense, kind of governed of the tube thickness, no worries mate looking forward to what you come up with, learn a lot from your videos man, love the content
@liamburgess6608 I truly do appreciate the ideas and input also man always open to it so always sing out if you have ideas like that they’re all welcome 🙏🏻
Looks good as. The tube work makes that tray nothing about it I don't like
Thanks so much bro, appreciate it 🔥👊🏻
Just bog it before u paint mate
Haha I might if it wasn’t being bolted to - it would just crack and break off I reckon, she’ll be right, I can try to get it better next time 👍🏻👍🏻
Like the videos but ive stopped watching all of them and started picking and choosing vidoes to watch
The band name dropping is annoying
And the loud music is annoying aswell
That’s alright man that’s the way RUclips should work I appreciate you just tuning in to the ones you wanna watch 🙏🏻🙏🏻
And thanks for the music feedback, it’s tough I get so many compliments on it but then lately the odd one or two that don’t like it, I kinda just try make stuff I’d watch but also obviously want it to be enjoyable for others too. Hard to please all the viewers, we’re all so different.
As for the band name stuff I dunno what you mean if you could explain? Thanks for the feedback dude 🙏🏻
@@timmyhasheart yeah I really liked watching the videos before kingchrome and the other sponsors come on board it seemed to explode over a few months going from Aussie arvos type videos to no wasted weekends videos
Don't really know how to explain it in a comment
Just my opinion
your track videos I allways watch them
Na dude all good I honestly appreciate the feedback, I do need help from brands to keep videos coming out and keep parts coming in etc, and builds moving along. Being a dude with a day job, mortgage, 2 cars, expenses etc. it really helps having a hand from brands. I do legitimately only work with brands I’d either use anyway, or was using already, I’m a long time customer of road runner, Kincrome, superior, would hate to know my total spend at these places haha and while being in the background and what not I do try to only talk about them when I think it’s relevant, but I also understand where you’re coming from.
I do look heavily up to Mac & TJ & Pooly etc. too so I guess that comes through in my editing style. But appreciate you like the trip videos cheers dude, there will be more of those coming soon. 👍🏻
@@timmyhasheart great response man
20:12 great work for a solution
I was stressing mate you’ve no idea haha, glad it worked out though
10:37 ouch. But worth it for the look.
Yeah nasty as, healed up alright though bloody painful at the time haha
Another banger brother bro I has the best idea you should make welding jackets like hoody jumpers bro. And put your brand over them to sell or any welding company's out their looks to sponsor our boys @timmyhasheart would be mad as poor fella hahhaha your a legend keep up the good work
Hahaha not a bad idea, hurt so bad but it was my own fault I should have been wearing a glove, but wasn’t even welding I was just grinding, not paying attention to where my sparks were going 🤣
@timmyhasheart true that bro hahahaha we have all been once or twice hahhaa. And 💯 you should start doing mad merch drops I don't normally bye anything like that butt if u did I would get something again love your content keep them coming