Personally, I think what you had already done with the bumper was fine. With the addition of an LED strip it would’ve made some for cool sidelights while maintaining the look
Where the metal rod is, it's a perfect place for led housing. It would look really really good. But whatever you decide on, i'm sure you will make it look fantastic anyway. Wishing you all the best man. 💃
Be careful when widebodying the car because id i remember correctly you barely managed to squeeze the car inside the garage because of how wide the car was… just a friendly reminder ❤️
If your planning on having the rest of the kit 3d scanned. Maybe you could perfect one side of the bumper. Have that half scanned and on the computer they can flip and join the model so its 100% symmetrical.
It's a good idea man! I might give that a go, the only thing that might prevent it happening is funding as the 3D scanning and printing is pretty expensive now I've looked into it 😅😭
So i booted the game up with the xbox 360 models so the details are a bit sharper and that bit you cut off from the bumper looks like a rectangular metal tube. It does not sit flush with the front of the bumper nor is it bent to follow the curvature of it either. It just looks like it goes inside both sides of that gap diagonally (when looking from above) and there's the mesh behind it. The finish does not seem to be chrome, just a flat metal, although i am not sure if its meant to be chrome or not given the limitations of the game at the time. So up to you how want to tacklet it, its just a pair of straight tubes that are somehow stuck inside both sides of the gaps they're in, like its trying to pretend it is a single support beam across the whole bumper. In hindsight, could have kept the bits you cut off, trimmed it to shape to resemble it and just sprayed a matte silver finish when painting later on
I was going to suggest he get the game but if you've already got it installed on PC with high res models you should take some screen shots for him, would only take 5 minutes. Maybe paint the car a bright colour so it shows all the detail, or a video of it spinning 360.
have you thought about getting the raw 3d model of the whole bodykit straight from the game? it could've been used as a proper mold. cars in most wanted were laser scanned so it shouldn't be that far off the real car, all it would need is some smoothing in 3d software.
Today was a fun day and i booted the game up and did close inspection by debug cam and it is a metal piece for the missing place i can send the pics if you want to
Ура новая серия, как же я ждал ее бро. Выпускай чаще видосы, можно вообще сделать по типу, моя жизнь, и снимать каждый день что происходит и как, ну или 2 видоса в неделю
Personally, I think what you had already done with the bumper was fine. With the addition of an LED strip it would’ve made some for cool sidelights while maintaining the look
I think I am going with the LED light strip. It should look good 👌🤞
@@blacklist_danI came here to say a nice led light would look good there.
Where the metal rod is, it's a perfect place for led housing.
It would look really really good. But whatever you decide on, i'm sure you will make it look fantastic anyway.
Wishing you all the best man. 💃
Thanks for the input mate, after reading your comment I've now brought led lights for it! Hopefully it looks good 😅🤞
@@blacklist_dan Amazing!
No worries!
Good luck bro!
Awaiting your next upload 😎
A light strip there in place of the missing bumper piece would look really cool
uh yeah that would look good!
Be careful when widebodying the car because id i remember correctly you barely managed to squeeze the car inside the garage because of how wide the car was… just a friendly reminder ❤️
worst case he can kick down the wall :D
Like @AdamBilacsics said, we can always kick down the wall 😂😂😂
Best of luck for getting the other side done its been great to watch the progress even throughout this video
Thank you man! I appreciate the support! 💙💯
Your attention to detail is something else 😏
It'll look as in the game i've got no doubt, congrats to your work 🔥
Keep it going mate 💪🏻
Thank you for noticing man! I do try my best and I hate doing things half hearted. It's got to be perfect 😁👌 thanks again 💯
If your planning on having the rest of the kit 3d scanned. Maybe you could perfect one side of the bumper. Have that half scanned and on the computer they can flip and join the model so its 100% symmetrical.
It's a good idea man! I might give that a go, the only thing that might prevent it happening is funding as the 3D scanning and printing is pretty expensive now I've looked into it 😅😭
@@blacklist_dan yeah cost is always the issue. Look forward to seeing what you come up with.
Good video bro
Keep em coming 👌
Cant wait to see this completed
So i booted the game up with the xbox 360 models so the details are a bit sharper and that bit you cut off from the bumper looks like a rectangular metal tube.
It does not sit flush with the front of the bumper nor is it bent to follow the curvature of it either. It just looks like it goes inside both sides of that gap diagonally (when looking from above) and there's the mesh behind it.
The finish does not seem to be chrome, just a flat metal, although i am not sure if its meant to be chrome or not given the limitations of the game at the time.
So up to you how want to tacklet it, its just a pair of straight tubes that are somehow stuck inside both sides of the gaps they're in, like its trying to pretend it is a single support beam across the whole bumper.
In hindsight, could have kept the bits you cut off, trimmed it to shape to resemble it and just sprayed a matte silver finish when painting later on
I was going to suggest he get the game but if you've already got it installed on PC with high res models you should take some screen shots for him, would only take 5 minutes. Maybe paint the car a bright colour so it shows all the detail, or a video of it spinning 360.
i feel just a simple lip on the bottom of what you already have might be an easier alternative.
Yeah it could be but I'm going to be so annoyed with myself if it isn't done right 😅 I have no excuse when there's a picture of it as reference 😂
I'd class the white bit on the front bumper as part of the livery. It's just wrapped white 😊
have you thought about getting the raw 3d model of the whole bodykit straight from the game? it could've been used as a proper mold. cars in most wanted were laser scanned so it shouldn't be that far off the real car, all it would need is some smoothing in 3d software.
I love your build Dan! Keep at it mate!
Thank you, I will do! 💙💯
Where can I send you the video about that part and bodykit from the game? My favorite series, keep up the good work bro! Greetings from Türkiye :))
Today was a fun day and i booted the game up and did close inspection by debug cam and it is a metal piece for the missing place i can send the pics if you want to
Nice
0:41 the face says it all
😂😂😂
Don't forget my flexible filler trick too 😉
I will never forget that trick, it's helped me out a few times now 😂😂
It's not a bodge it's an improvised solution 😂
😂😂😂👌👌👌 ahhhh your a bodge technician aswell I see 😂
Ура новая серия, как же я ждал ее бро.
Выпускай чаще видосы, можно вообще сделать по типу, моя жизнь, и снимать каждый день что происходит и как, ну или 2 видоса в неделю
I'm happy you're enjoying them! I will try to post more but it is hard to do when I have to work a normal job as well 😔
Hey dan, I was thinking, how about using nfs mw 2005 soundtracks for the background music in your videos?! Would be pretty awesome imo
It's a brilliant idea, I'd love to do it but I will get copyrighted for it, the last thing I want is a copyright strike against my channel 😭😅
Are you looking for a artist to make the side graphics/decals? I know a cousin of mine who's into making vector graphics
Young, when is the next video.
I'm working on it as we speak 😉👌
@@blacklist_dan I'm waitig.
it looks like a light and not a metal piece
@mk5_angel она так же делала из пены монтажной 😂