Fugalite Bio on Terrace Area

Water-based hypoallergenic resin for waterproof, stain-proof, silk-effect
grouting of vitrified tiles, natural stones and glass mosaic. Ideal for use in
GreenBuilding.
Fugalite® Bio is dermatologically-tested, with the result as hypoallergenic
according to a skin tolerance medical experiment conducted at the University
of Modena and Reggio Emilia dermatological clinic. Available in 12 natural
shades inspired by the collections mainly used for making contemporary
ceramic coverings. Guarantees the aesthetic and functional continuity of
grouted surfaces.
FIXING RANGE / Fixing ceramic tiles and natural stone
Use
Waterproof grouting of joints from 0 to 5 mm with high chemical and mechanical resistance and a high level of hardness. Bonding of
glass mosaic.
Materials to be grouted:
- vitrified tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic, of all types and formats
- natural stone, recomposed materials, marble
Flooring and walls, for internal and external use, domestic, commercial and industrial applications and street furniture subject to
permanent or occasional contact with chemical substances, in environments subject to heavy traffic, swimming pools, thermal water
baths and fountains, heated floors, also in areas subject to thermal shock and freezing.
Field of application Directive CE MED
Environmentally compatible grout and adhesive ceramized used as adhesive and/or as sealant between tiles.
Maximum mass per area 1475 g/m2
Thickness as adhesive layer 0.9 ± 0.1 mm
Thickness as sealant between tiles 3.9 ± 0.1 mm
As finishing material for all exposed interior and concealed or inacessible surfaces. When intended for bulkhead and ceiling, the product
may be applied to any non-combustible support having a thickness equal or greater than 10 mm and a density ≥ 656 kg/m3
. When
intended for decks the product may be applied to any metallic support, any non combustibile support an any material having low flame
spread characteristics.
Do not use
On joints more than 5 mm in width, on porous flooring for which more specific or alternative chemical resistances are required compared
with those listed in the chemical resistances table, to grout elastic expansion or fractionizing joints or on surfaces that are not fully dry
and subject to moisture rising.
PREPARATION OF SUBSTRATES
Before grouting joints, check that tiles have been fixed correctly and are anchored perfectly to the surface. Surfaces must be perfectly
dry. Grout joints in accordance with the recommended waiting time indicated on the relative data sheet for the adhesive used. For mortar
substrates, wait at least 7 - 14 days depending on screed thickness, ambient weather conditions and on the level of absorption of the
covering and the surface. Any water or moisture rising can cause vapour pressure to accumulate, which may in turn loosen the tiles
on account of the complete non-absorbency of the grout or of the tiles themselves. Joints must be free from any excess adhesive, even
if already hardened. Furthermore they must be of an even depth for the whole width of the tile covering, thereby ensuring maximum
chemical resistance. Any dust and loose debris must be removed from joints by carefully cleaning them with vacuum cleaner. The
surface of the coating material to be grouted must be dry and free from dust or site dirt; any residual protective coatings must first be
removed using specific products.
Before grouting joints, check if the tile surface can be properly cleaned, as porous or highly micro-porous surfaces may make cleaning
difficult. It is advisable to perform a preliminary test on tiles not to be laid or in a small, concealed area.
SHELF LIFE
It is recommended that the packs are stored at +20 °C for two days prior to use; higher temperatures increase the hardening speed,
while lower temperatures make the mix hard to lay and slow down setting.
PREPARATION
Mix component B with a trowel, pour it all into the bucket of component A, making sure that none of component B is left in the tin.
Mix the two components using a low-speed helicoidal agitator until a smooth, even coloured mixture is obtained.
Mixing by hand is not recommended. The mixture remains workable for approximately 45 min. (value calculated at +23 °C, R.H. 50%).
APPLICATION
Fugalite® Bio must be applied evenly on the tile covering with a hard rubber trowel. Grout material has to be completely filled between
entire joint areas, the application has to be done diagonally with respect to the joints. Remove most of the excess grout immediately
using the trowel, leaving only a thin film on the tile.
CLEANING
Preparation
1 First cleaning with rubber trowel: once the joints have been filled, remove
any excess grout that is left on the tiles immediately with the rubber trowel
(working diagonally).
2 Cleaning: prepare the tray with clean water.