Buying a CHEAP Cat skid steer, sight unseen, online. Will it run in Minnesotas Winter? 4 k
HTML-код
- Опубликовано: 24 янв 2020
- I bought a Cat Loader, Sight unseen, from an online website, had it transported up 1300 miles, just to have it get stuck on the trailer. This Loader seemed too good to be true. It was a 2018 Cat 259D with 747 hours, priced at $40,000-about $28,000 less than a brand new one. But it was in Mississippi. About 13 hours away. They claimed everything was fine with it. But it had never seen a Minnesota Winter. They hauled it up here. But will a Mississippi MUD cat start in a Minnesota Winter?
Awesome Amazon Tools below:
Igloo trailmate: amzn.to/2UBVYPW
Ego snow blower: amzn.to/2C62ya4
Crescent wrench pass through socket set: amzn.to/2EjfLh8
Milwaukeetool packout: amzn.to/2EfXhy8
Striker trilight: amzn.to/2Pxehln
Bosch impact set: amzn.to/2LdNb28
3m work tunes: amzn.to/2Ee9t2w
Makita Chainsaw: amzn.to/2PyDEmU
Dewalt mitre saw: amzn.to/2QMndrU
Heres the best prices on Some of my favorite Amazon tools:
Dewalt concrete saw: amzn.to/2FsxsNE
Fiskars axe: amzn.to/2DIsieP
Gear wrench Speaker: amzn.to/2Lbhl6l
Get 10% of Jobber software here: getjobber.com/im/dirt-monkey/
Makita Power shaft Multitool: amzn.to/2DroIowShock strap: amzn.to/2KoEAth
Milwaukee tools heated coat: amzn.to/2r164fr
10% off Kujo shoes here: www.kujoyardwear.com/?promo=10...
Diablo Metal cutting blade: amzn.to/2Kan8bE
ISO tunes
ISOtunesAudio.com?rfsn=1826204.613aa5
Milwaukee tools Air Compressor amzn.to/2EfYCoP
Winter equipment-Best cutting edge ever:
winterequipment.com/shop/contr...
Igloo trailmate: amzn.to/2UBVYPW
Ego snow blower: amzn.to/2C62ya4
Crescent wrench pass through socket set: amzn.to/2EjfLh8
Milwaukeetool packout: amzn.to/2EfXhy8
Striker trilight: amzn.to/2Pxehln
Bosch impact set: amzn.to/2LdNb28
3m work tunes: amzn.to/2Ee9t2w
Makita Chainsaw: amzn.to/2PyDEmU
Dewalt mitre saw: amzn.to/2QMndrU
Warning- If you buy from one of these links I may make a small commission. 
Развлечения
![PADDINGTON IN PERU - Official Trailer [4K] - Paddington Bear is back!](http://i.ytimg.com/vi/lKgitu25ZAg/mqdefault.jpg)
Yes, comparing the three: buying, leasing, and renting would be useful.
I know Bobcat had a great lease deal recently. Payment was almost the same as buying it and you can buy it out at the end.
Nicholas K I’m pretty sure cat has a lease to rent deal to I’m also pretty sure they do it with money towards renting machines with them
yes please do a comparison
I would also change that oil again in couple hours after seeing how old it looked and there is alot of oil that sitting inside the oil cooler and head that does not drain when changing it.
agreed
At that amount, I think I would spend the extra 20 grand and get a new one and not buy someone else’s headaches
That's why I never buy a used vehicle of any kind.
@@robert9595 I am thinking about getting a used Skid Steer, but I proabably only use it 30hrs a year. Doesn't seem worth spending $60K for a new one for my use.
Love this guy’s attitude. Not scared to take a risk, keeps things in perspective and enjoys life. Good role model.
That dude that you bought that skiddy from sucks at operating, and also him slamming that bucket all the way to the stops just shows how much respect he has for machines
He's their lowest paid dummy that got to take a road trip.
I would love to see a video about buying vs leasing vs renting!
All of my friends that where renting a skid steer never became A thriving company they were all one hit wonders , no one says everything has to be new ,but you need skid steer ,mini excavator, a good size wood chipper and decent dump truck ,trailer ,used equipment is half price you just have to be thorough, I did lawn maintenance it paid for all of this equipment in five years and then the next 25 years is downhill your reputation is being able to execute immediately after phone call ,you’ll be busy forever don’t let anyone tell you otherwise ! You’ll be working while the other guy is at the rental shop making a reservation for a piece of equipment
If only there was a way to take a picture or 40 and send them electronically so Stan could have seen what he was buying. A video of it cold starting and running would have confirmed it runs. If only...
A timely and worthwhile video . Yes , cost of operation comparisons are always useful for the occasional user and professional .
I like how Stanley builds up his help on camera. Stanley’s positive vibe stands out on YT.
Love the "I Dream Of Jeanie" reference. I concur! 😂
Yes. I would like to hear the pros and cons of renting,leasing and buying equipment.
Appreciate you and all your videos! I may explore some your courses soon. You put me onto snow wolf in 2015 and I finally bit the bullet on some of their tires for my S300 2 speed Bobcat. I'd argue a 50% traction improvement and a scraping capacity that prior to those tires simply wasn't possible. I then found a guy that builds angle blades in my neck of the woods with an 8 spring 2-5' cutting edges that individually trip. Freakin awesome! Thank you for bringing all these videos and the latest greatest goings on where you're at both professionally and personally. Mostly professionally but the personal side is definitely there. Thank you!!
Thank you Joshua !
Yes absolutely make a video on the business pros and cons of leasing renting and buying. I'm just getting started and I enjoy learning from you Stan!
Thank you James !
Yes buying, leasing renting definitively interested tip see the comparison. Thank you Stan. As always great video
Appreciate that Martin, thank you !
When I saw the chunks in the black oil that was game over for me ! 😬
Yes please. Compare the build/buy/lease/rent options. Thank you for making these videos, Stan. God bless!
Hi there Steve from Australia, we just did what you have done and got a second hand cat 257D with 313hours on the clock for $70,000 and after working out we saved 26,000 on buying new,when we got it home it needed a full birthday,just full of mud in the engine bay and I've started to touch up the paint here and there to make it look cleaner,love that you went to cat for parts and just like here thay always have everything I ever ask for with out weighting,my wife and I have been implementing all of your videos,even the old one to our business and in the last 2months she's been telling me to have a day off....thanks Stan all the way from Australia
Hey thanks, awesome to hear all of that, everyone needs a day off !
It's crazy that you made this video right now. For the last month I've been searching all over the country for a used Cat or Bobcat skid steer. On Friday I settled on two different Cats and one Bobcat and haggled down to the best price on all three. All three are 2016's. The Bobcat has 750 hours the Cats are both right under 1000 hours. I've watched auctions, even bid a couple of times, called dealers and called other people. The point is, I've done a ton of research on used skid steers so I am familiar with what you can get out there at what price. You got a pretty good deal considering it is a 259D, a freaking 2018, under 800 hours with enclosed cab and tracks. Looks fully loaded. I too would be a bit disappointed in the damage/scratches and general maintenance of the machine. For a 2018 with that many hours it should be fresher. Considering what I've seen out there (there are plenty of options in this price range for a machine just like that) I probably would have sent it back and searched for another one. However, it's one thing to say that and then have the machine sitting right in front of you and be that close to finishing the deal. You certainly didn't make a bad deal.
I was running a machine exactly like that one, about the same year, for a company and it wouldn't start without a jump, even with a new battery. Cat man showed up with a ground cable, replaced the ground cable and fixed the problem.
This machine was practically new and they knew the ground cables were faulty. In my experience this is something Cat is guilty of, knowing of faulty parts but never saying anything, hoping it will not be an issue until it is out of warranty. I have had this problem with them before with my new equipment, and also with new parts for older equipment.
Dito: ha...bought fairly new Daewoo skid steer years ago. Had starting problems. Spent $1200.00 over the course of a yr at different shops. Ground cable looked nice but it was faulty. On a hunch I used tracer wire to ground engine to frame. That 8 yrs ago....stll running good.
I have run into that as well, except they did the repair out of warranty for free. I took machine to them. If they came to machine I would have paid for a service call.
They have been outstanding on service exceeding my expectations since 2004.
The prices of parts is an issue with a bitter flavor to me as well as their charges to rebuild hydraulic cylinders is outrageous ( by this I mean more than 4 times the price of their competitors).
This video took me back, in the early 90's I worked for a company out of the cities, we del with Zeigler Cat exclusively! Great memories. And yes, if the price was right I would probably take a chance just like you did.
Hey Stan..love your videos. I'm Steve from Yarmouth Nova Scotia and have done thousands of hours of snow removal AND dirt work in these 259D machines. The cab comfort is second to none and I do love the pilot controls. Not as quick as the old style Bobcats for doin "tricks" I'll say..but still pretty responsive. Track sag should be about 2 inches ( middle roller measured from bottom with track off ground). I just guess when adjusting myself...but obviously too tight is worse than a lil loose. Your guy said something was missing when looking by the door but wasn't sure what...it's the serrated step that helps with entry and exit. You'll wanna put one if them back on. These machines work VERY well...and like I said..Cab comfort is very hard to beat. The heated air ride seat is straight out of a Cadillac Escalade Lol and with the smooth and easy pilot controls..it's a dream to operate for hours on end. If ya half way look after it..it'll give ya lots if hours trouble free. Only thing I find seems to fail often..is the sensor for auto bucket level ( if equipped ). Any questions...just ask..I've put thousands of hours in these. TC. Steve Muise. Yarmouth Nova Scotia Canada
One more thing....they have an electronic quick connect AND a hydraulic one for releasing buckets) attachments. IF yours is electric.. be aware.. they lock up and click in winter ..and will do it always no matter the temperature if you hold switch Too long either releasing or unlocking the attachment. This is the plastic ( yes. PLASTIC) gears inside the motor stripping. It's a bad design and it's around 600 bucks for a replacement motor and shaft. The Hydraulic one is a FAR better set up. Don't know WHY the other set up even exists.
I never saw the air filter come off, if she's choking that can change alot in the way she runs.
Yes, would like to see videos on the differences in “purchasing vs leasing” equipment; even if it’s a “dry” topic.....still is information ppl can use & learn about 👍🏻
Agree w/ you that this is a little “beat up” for a 2 yr old machine; but it does run, work, & the price was pretty good.....so, I’d be happy w/ it (plus, can always put some extra money into it, if wanna fix those “issues”).
Lastly, not sure if “deal is done” & money already exchanged.....but maybe see if can get $400 more off since put that into the machine before got off trailer, just a thought.
Cheers✌🏼
Yes I agree I'm sure some small companies would be keen to know the comparison Cheers
Yes,.. I have the same 259D for my fence company, rubber tracks tend to wear out fast when used on asphalt or cement, you can also adjust the tracks by pumping some more grease in the grease sert .. congrats on a good buy, it’s a wonderful work horse..
Those Milwaukee sockets with the flats also are nice because they won’t roll away
Missing a step up front there in front of the door. And watch those headlights. They’ll burn you. We switched over to led.
I got on youtube tonight for a comparison of the three. And watched this video as I was trailing off and BAM! You got me right back there lol. Please do!
Yes that would be an awesome episode! Buy versus rent versus lease
love my little machine, i currently weld on those track roller frames in the assembly process
Cat is offering 0 percent financing on there new skid steers if I would have done the math on that before buying used.
0% interest is just a gimmick. They just add that cost into the price for gullible people like you.
@@cyberblock7619 exactly.
Buy one get one free. But what the gullible fail to see is the mark up on that bought item to offset the loss of revenue for the "free" product.
Another thing, Full synthetic is a marketing gimmick, there is no such as "full synthetic" because synthetic oil...is synthetic...man made lol. You can't man make more than a man made product lol.
The experience you had in parts at cat is why I own cats from sales to service I have never had an issue. The other night we had one of our machines stolen and couldn’t get into our remote app at 10:00 at night our cat dealer was tracking the machine for us we got the machine back in a few hours after noticing it gone. They have opened up their yard on a Sunday so we could check out some machines for a snow lease. I have never had service remotely close to what they have done for us
Hey Stan. I'm a Minnesota guy living In Waukegan just north of Chicago. I just recently started watching your channel. I'm a bit older than you(66) but still going strong and enjoy work every day. We provide many of the same services but i primarily work for a Habitat for Humanity affiliate as their construction manager. We build homes with volunteers in all phases of residential construction. I do the excavating, concrete, carpentry landscaping as well as home design and have a warehouse where we penalize houses.. To put it in simple terms "I was Born to Build" and seems like you are very much the same. With regards to your question regarding buying, leasing or renting. This year I bought a new GEHL RT 215 for tax reasons. IRS 179 deduction that allows me to write off the full value of the equipment this year. This is available until 2023. I have done this once before and wrote off the total value of a used Kobelco ED180 excavator. Everyone's tax situation is different and that will determine the best way to get the equipment they need and use the available tax laws to help reduce the cost of ownership. If you depreciate your equipment to zero it will become profit when you sell it.
Have you discussed the benefits of buying used vs new? Radial lift machines vs vertical lift machines? I have seen the wheel vs track video and I have both.
Stan, I appreciate all your videos, and it's great that you're trying to teach people. A video about the pros & cons of the different equipment purchasing options for a business, would be very helpful.
Thank you , I really appreciate YOU being here and watching!
Yes would really like to hear about the difference buying, leasing , and renting. Was just thinking about this s few days ago!
Thanks Carrie !
A good wash inside and out, new decals and repainting the back door and she will look pretty good
@Stanley I thought those tracks were going to jump right off! Holy moly.
I would have been really frightened by the condition of the oil. Also, the sprocket was VERY worn.
CAT dealers are the best, they have parts availability better than any other dealer.
The oil that come out of it 😂😂, and yes the tracks look pretty loose 😝🔧🔧🔧
That oil was horrible. That machine must have been a rental and got beat on daily or something
I think the guy knew he had a fish on the hook when Ol Stan rolls up with his hat on backwards lol.
You can lead a horse to water but can’t force it to drink.
You won’t be disappointed I plow with a cat 262D and I absolutely love it
Watching your videos sometimes makes me homesick for the south of the river burbs.
Its loud enough that my closed captions register the sound as "applause" .
It’s not grouser those are triple flange idlers. They make single, double and triple idlers. Grousers are on the top of metal tracks.
😂
I seen your comment 10 seconds in and had to watch to see wtf you we’re talking about lol. They do make single, double, and triple pad grousers. But that’s def not what he was talking about in the video lol
Grousers lol
Dave's scared !
I almost had to write comment but thankfully you already did.
Yes a comparison video would be great! Another great video!
Yes I would love to see and video on renting, owning, or leasing out equipment
Thanks Joshua !
I would like to hear the pros and cons of all 3, I think it would be interesting
Would have passed on that one. Age, hours, physical condition and drain oil scream NO!
Age and hours? This thing is basically brand new as far as age and hours. However, I totally agree that it is way too beat up and the fact that the oil hasn't been changed tells me all I need to know about how it was maintained...it simply wasn't. That would scare the hell out of me. 750 hours and no oil change, wow. I imagine that skid steer is going to be full of issues over the next couple of years.
Yep it was trashed out by renters, that didnt care, i wouldnt give over 35-K
@@suburbanhobbyist2752 that's the point. It is very new with low hours, but it's condition is that of an older and higher hour machine. That oil looks like it may have never been changed. Would never chance it on something lime that especially with having to put different tracks on also.
U guys have no clue, oil in bottom pan was from there as the kid said, tracks is a couple hr job. He can sell that machine in summer and make money. It's a cat!
@@kwmiked no, the chunks were in the pan, but that oil was still tar Black. This begs the question of whether it was ever greased or how often. Doesn't matter if it is a Cat if it was not take care of. . . .ASV is better anyway😊
Definitely want to see a video about your experiences with renting vs. owning vs. leasing!
The flat sides on the sockets also help to keep them from rolling away on uneven surfaces.
You can’t go wrong with cat as long as you have a good dealer. My cat dealer here in southeastern PA is great that’s why I have so many cats. The serial number on the side tells me it was probably a rental machine that’s why it’s so beat up. By the way you probably already figured it out but the whole radiator on top lifts up to give you better access to the engine
He didn't say he had much Cat experience and I'd suggest he get the manual set
either digital or online especially the machine maintenance/service one.
We run large Cat excavators to unload marine river barges.
Very nice big iron.
I really love my cat 259D bought it new. For me if you are going to use it every day buy it, especially a track loader. Crappy operators just don't clean out the tracks after each day and try run it like a wheeled skid. Rent if you plan on abusing it or do not need it a lot. This machine has a great motor the C3.3 it actually is a Kubota v3307 motor similar to the one in a s-250 or 300.
Some things you should know I wish someone told me day one. Put the cat guards over the hoses to final drive motors. If not, turning on a potato sized rocks or concrete can really cause a problem that the track undercarriage needs to come off to fix. With any track loader you want to try your best to turn like your on a dozer and avoid zero turns if possible. Also reduces track guide and undercarriage wear and bringing unassay debris into track system. That electric actuator to attach bucket keep that clean and lubricated and all associated moving parts. I run mine with a 1 yard most of time helps keeps debris from getting behind the bucket. Hope you have good luck with it, I love mine.
Hey thank you and thanks for sharing your experience !
No problem like the vids! Was going to add that leasing to buy is a double edge sword not sure its a good idea for most. I did that once pampered it like I owned it, at the end I did not have the money in the bank at time of lease end and I could not get the credit to buy it out in the end. But could get credit to buy a new one. Recommend buying used/new or renting monthly pay for pick up and drop off . Also is subjective what is normal wear and tear at the end of a lease and fees to fix if they come up with stuff.
This is good stuff, seriously enjoy videos like this.
Thanks Dan !
Nice, a couple of complements and he does all the dirty work.
Yes I wanna hear the advantages of buying leasing renting 👍
Thanks Patrick !
Right (New Track) looks & sounds loose.
With how bad the engine compartment & oil where, makes me "a bit Leary" if ANY PREVENTATIVE MAINTENANCE was ever done... Greasing is my MAIN CONCERN!
Especially if the Track Tensioners haven't been charged with the proper grease.
I used to use a couple Toro Dingo (20 &25hp) that I was hired as the Mechanic, sadly my Boss never allowed enough time for proper repairs, until I was hired! What a CHORE! Great machines though!
Take care,
🤓 -Thomas
Western Washington State
Ya I hate running equipment without have time to maintain them we have stuff breaking all the time and they wonder why it cost 3 to 5 k to fix it because no one maintains them
Looking forward to the video where you explain the benefits of renting, leasing and owning equipment.
Keep up the good work.
Thank you !
Leasing vs buying vs renting, very important business information for guys that are starting up! Information on topics like that, while possibly less entertaining is much more valuable!!! Do it!!
Thanks for the input Brandon !
I haven't seen the whole video yet. 13:11 seconds into it I say send him home with that thing. Now I've seen the oil that came out and think you should run them out of our state!
Haha, here in southern Arizona on the farm that machine would have that dirt build up in one day.
Haha I like in my we have a geal and a bobcat they have had dirt and manure on them like that since day one on the farm
Yes, a video discussing the pros and cons and tax advantages of buying, leasing, and renting would be an awesome informative video.
Thanks Gregory!
I run cat 140-160m graders everyday. love the joystick controls
Those numbers that are stenciled on the machine usually mean it was in a rental fleet.
good eye. rental: new operator every week, don't care at ALL. I've seen 1700 hours on oil from local bobcat dealer rental fleet, then they sell it as maintained in hosue loollllll
There's a reason he's wearing sunglasses. He's putting on a poker face.
No, he's just the lowest paid dummy they could afford to have gotten rid of for a day or two.
Who looks like total stoner
Yes, a video on buying, leasing, renting would be great! Thanks.
Thank you !
Excellent video! I almost shat myself when you said you got a free hat. That used to happen 25 years ago. Not these days. Cat Rocks...
Thank you !
Hey Stan its Rocco from R &J Property management here in Connecticut I'm glad you did all of those things to make sure it was running properly good luck with it always enjoy your videos there appreciated so please keep them coming thanks your friend Rocco from Connecticut . Stan change the ground cable from the battery should fix having to jump it.
What part of Connecticut are you from?
@@pedroalvarenga1600 Hartford area
I would be interested in a video about the differences between owning, leasing and renting
I usually go with a lease if I can't afford the payment on new.
On used equipment your monthly payment is usually more than leasing, or buying new. Higher interest rates with less months.
I look at the size of my monthly operating cost in case things go sour or long winter months. If I can buy or lease a new machine with a warranty for a less monthly cost over buying a possible piece of crap that cost me down time, repair cost, and more per month for payments, I will go new.
If you have cash that is a different story, but down time and repair cost still is a factor.
You can have the stuff for about six hundred bucks a month
I can confirm. Beater trucks are the best way to learn how to turn wrenches. Exactly what I did.
Would love a video comparing the three. Thanks for making these videos!
Thanks Jason !
Buy service and parts manuals, change hydraulic oil and drive motor oil, check antifreeze strength and DCA levels, and change engine oil and filter again at half the recommended interval, cause it looked like it had never been changed and adjust those tracks. Sounds pretty solid otherwise. Good luck.
Thanks for the comments Dean !
Fletch would check the Fetzer Valve!
Just get me some ball bearings and some Prestone. No, make that Quaker State.
Yes, please,
Do the video on the advantages or draw backs of Leasing, vs Buying, vs Renting a Track Steer. Thank you.
Yes do the comparing video for buying vs leasing and rental. Thanks for the great videos
Thank you Jonathan !
yes I would still take it to Cat for a once over, cleaning, another oil change after it got hot. They see a lot of Cats! 40k ain't peanuts but better than 65. The 2 speed is great.
This tracksteer was clearly submerged in mud for an extended period of time.
It’s prob just rice paddy mud the environment down here is a lot different from up north. With that said rice paddy mud is often 14-18 inches thick
@@blackw0lf993 yep, we've got a wheel skid steer and it's never been submerged in mud but man after our last job it was absolutely full of dirt just because of the dust condensing, mud/dirt thrown up.
@@BlackHawkBallistic Hell I live in Kentucky and we bought a real old one, A gehl I think. Not sure what size or anything. Cheap old that works. But two weeks after we bought it, I had to use it to move a jet sky to the river because we was flooded in . Went to just river front to an island in just a two days. Anyways got it stuck in the mud for about an hour or so. Thing has mud all thru it. Didn't hurt it just muddy. Got a 4x4 truck stuck first 🤣🤣🤣. Fun times
Naw just used
Cool to see you stop in at Ziegler. Thats where I work! Nice Video!!
Cool, thanks for watching Sam !
I had a pair of 2018 Cat 299D2 XHP’s I purchased them new in 2018, they each ran right around 340 hours per month doing chore related work, scraping alleyways, pushing feed and a little snow in the winter. I had planned to run them for 16,000 hours to recoup their cost. Didn’t happen! Finally gave up on them each around 3800 hours. I ended up getting a pair of Case 321F wheel loaders instead. Hands down better machines and just as versatile plus tons more operator visibility. Price wise they were ballpark with the Cats even.
Yes. Im very interested in the asv.
I'm hoping to buy an asv in the next month
@@andrewstratton806 ran and owned bobcat all my life. Ive use a lot of different skid and track loaders. Im very impressed with wacker neuson small frame at this point in time. The one I really interested in is the asv.
Time to service the hydraulic system. Itd be worth a full fluid swap and filter change.
Especially after runing a mower in the south
Cat recommends several different fluids. 0w-40 crankcase oil is good from -40 to 104 Fahrenheit.
I would agree, but I would also replace the whole with the broken hose wrap first, one damaged hydraulic hose from a tree limb might not stand up to too much sub zero ice winter
A video with the difference between buying, renting and leasing would be great. Also some demos for a mini digger to replace the bobcat.
Nice machine, congratulations and GOD Bless you too!
Thanks so much!!
That machine is a cat rental that’s what the numbers on the back of the machine are for
That number doesnt imply a rental. "FTL15257" is not a rental number, it is the serial number of the machine. Dealerships often place the serial number in a convenient location. This makes it much easier to find (when your lot has 50 machines for example), and it makes it easier for techs to look up information.
Its a no brainer. I would pay the price for the new machine. When you buy a new machine you have a warranty and peace of mind. Then you can sell it down the line for 40K plus.
seems to make sense... the last guy did that, no maintenance costs obviously and no matter what his workers do, it's warrantied... so he hires guys like the one we get
The JCB skidsteer with the telescoping arm would be perfect for moving back snow piles.
I have a teleskid. It is not reliable. Side door entry and extendable boom are awesome but my Bobcat S130 is tougher in every way. Jcb parts come from the UK. It was in the shop for 3 months waiting on parts. Unacceptable. I just bought a T770. Jcb is for sale if anyone wants it.
YES, YES, YES. Anything to get a tax break. Good vid. I watch these to learn stuff. A lecture now and then is not a problem.
Awesome, thanks for watching !
Buying, renting, leasing. I wanna see it. Looking to buy some old beat up equipment to get me started in this game, I think if I can find some cheaper equipment I can fix a little I’d be able to make higher profit margins to get moving faster. I still need to learn about things like insurance and taxes. Right now I’m just hustling
Start a channel so we can join ya on the journey.
@@valleytractorservices9310 I agree starting a channel would be awesome. I so would subscribe. Also by being subscribed to Mr. Stanley is the best step any wanting to do this kinda work can do. Even tho I don't know you iam already proud of you for taking the first steps on what you need to do. Hope you have a wonderful and blessed weekend and coming week. Sending love and hugs from the central coast of Cali.
Yes bro, buy used. Few jobs and itll pay for itself.
I'm in a similar boat, on the mine services contracting side of things. I just picked up what amounts to a new old stock (11 hours) 1-yard underground loader for $9k yesterday, and a beat-up older one with a seized engine for $4k. On the open market, everything is worth around $60-70k; it cost me $16.5k. It's definitely going on my channel.
I bought a used cat 257b in 2004. It has over 8000hrs. It’s paid itself off and profited me millions. We do concrete so it’s not used as intensely but is a great machine. If your going to buy used get pre emissions.
its a shame to see high quality equipment being treated like that..
Fingers crossed that it's a good'un. Yes, a comparison would be interesting. Keep well, keep safe
I'm a fan of your videos and have actually learned some things from them and we always keep up with all the new videos, but this one I have to finally comment on and disagree with some of the comments you made. I own a trail building business based out of Austin Texas we do jobs all over the United States, I can take our machines from 100ﾟ weather to 0ﾟ within 12 hours and they will start fine run fine batteries have no issues, It hasn't been out of the 20's all week on our project in Missouri and I don't need a block heater for My 2019 Kubota U17 excavator or my 2018 vermeer CTX 100 skid steer. They start right up no issues. Keep in mind all the jobs are various times lines, sometimes a machine will be one a project for months. So I believe it all depends on how the machines taken care of, how often and well is maintenance done and how often is machine used. Ours never sit still so that may be a factor. Just wanted to put in my opinion on it. Keep up the awesome videos.
Cheap and $40,000 should never be used in the same sentence.
not familiar with construction equipment ??
The thumbnail says 4k
Lol
Bro 40 k is cheap for newer equipment, but Kubota right now is like expensive as hell 😂
It says right on the side of the machine Thompson Caterpillar with a rental number FTL15257
Hey Stan, all three comparison would be a great video. Keep on keepin on!!
-Cory
Will do Cory, thanks for watching !
You got a great deal little scratches main thing no rust plenty of mud. Thanks
Thanks Nick !
Why does Stan have his hat on backwards?
Did he lose a bet?
He doesn't know any better haha
He’d have gotten up the snow!
You can fix that Cat up really nice over time!
It’s warmer
Do another oil change with warm engine so you would get all the crap out.
yeah. prolly change oil pretty quick and then at half intervals for 3 changes, and then go full interval after that. engines run $7k installed for reman around here.. oils cheap, and filters
Yes, would love to hear the advantages and disadvantages of all three
Thank you!
Yes - That would be a useful comparison... It will help company owners make the right decision for their situation...
That was some nasty looking oil. You're going to need to change it again just to clean that crankcase out. Best of luck with your new purchase.
$40,000 is a lot for that I just bought a 2019 john Deere 317g with 140 hours and a warranty for $35,000
Whats the new price on that machine?
Deere and cat aren’t the same. It was a smoking deal, he can run that 2-3 years and still get over 35k if he treats it better than the goofball he bought it from
Deere is garbage conpared to CAT
Deere ctl are better than cat imo. Coming from a guy who has owned 8 different cats and currently owns 3...
Green Giant 60ish new depending on options
Yes that would be a great video. It would be very helpful to know the advantages and disadvantages of the three.
I don't think that you could make a dry video. 😀👍
Final drive lines love to go out in those machines but it looks good