Plasma Cutter PARKSIDE PPS 40 B2 (149€) - Unboxing and Test
HTML-код
- Опубликовано: 10 сен 2024
- Unboxing and testing the cheapest plasma cutter I can afford. Bought it in LIDL(Slovenia) for 149€. It's suprisingly good... for the money. All you need is an air compressor and you're set to go. LIDL's plasma cutter will easily cut steel to 6 or maybe 8 mm, thicker than that I wouldn't recommend. I also tested cutting aluminum, brass and stainless steel(INOX). Enjoy!
Хобби
If you want to make a donation or sponsor a video, you can contact me here: sponsored.unboxing@gmail.com
ruclips.net/video/7yZIVz6yNxM/видео.html&ab_channel=abdeNour
@@abdenour3209 vreau sa cumpar
Cum se face comanda
How match
I bought one of these today and I am amazed at it's cutting performance for the small size and price, making it very portable and useful for running on a small generator or inverter out in the field.
Worthy of note: My variant has an 'integrate' air compressor, some models don't. I paid £149.99 and in my humble opinion, it's worth every penny, for an impulse purchase from Lidl. They're going pretty quickly too and they have a limited amount in stock per outlet. Thanks for sharing this video, it helped in my decision to purchase one. 👍
Check out this channel and subscribe if you like it: ruclips.net/channel/UC1ycLijbbz1xgnxJCO1ipug
2
E ds aqua
Show de bola
Q on
Que tiempo de trabajo tiene esta maquina que enseñas en este video gracias
My latest unboxing and test of PARKSIDE tool: ruclips.net/video/i6N-mkOv1-w/видео.html
Хоть бы объяснил,какой ток и давление на каждый размер...И этот аппарат+ компрессор потребляют много тока,а вы подключили в смотанный удлинитель,цел остался или провода поплавились внутри катушки?
اني من العراق
@@user-wf7yq2xs2l спасибо,классный комментарий...
Hi
@@adhinarayana6428 هلو
Вот каким должен быть обзор !!! Чётко по делу и без лишних базаров!!!
Иногда и комментарии нужны...
Кто-нибудь отберите у Него резак , а то он начал полезные вещи портить.
😁
😂👍
Я только начал. Следующее видео будет очень интересным.
😂
@@MakeAndTest здравствуйте, ну и как аппарат? Хорошо режет?
Thank you for this detailed video - showing the steel thickness before each cut is really helpful
I'm glad someone appreciates this. Watch my latest video of another plasma cutter!
@@MakeAndTest Thank You as well, I got this plasma cutter solely based your video. Lidl was selling it now for 169€ and I don't need it for more than maybe couple times a year for small things, and for that price it is more than I ever need. When commonly in other stores the models starts at 450€ up to 700€ for cheap models, that is too heavy price for capability get metal cut for required shape when it is so.
This is one of those things I don’t need but really want lol, and for that price it’s very tempting..
lol go on dude treat yourself same here
You'll be surprised how useful they can be. This unit is a bit 'hit & miss' on thicker material, but on stuff upto about 5mm mines been brilliant, especially if you lash up a few jigs, such as ones for cutting circles and tracking templates. I've turned an old gas cannister and a sheet of metal into an R2-D2 log burner which sold for about 8x the cost of the plasma cutter and welder so left me with the units for free and about £500! It's also been useful for modifying an old set of gates and literally saved me days (not to mention effort) on my ongoing campervan conversion project. I've been nothing short of amazed by the quality for such a low price!
@@steveflatman oh dude that's such a great idea for a project ! I may have to have a crack at making one myself ! :D
@@Ryderman2000 The campervan or the gas bottle R2-D2?
@@steveflatman the R2-D2 gas bottle project. I heard they make good pot belly stoves, and ornamental pig garden decorations haha
You just made me buy a plasma cutter for reason
You did the right thing
What's the price 🤔🤔
@@shivarajuns3679 its in the title, €149
Wow the quality of this unboxing is incredible. 😂 The way you slide everything out of the box and the camera angles
رايد بلازما اشكد السعر
Did you connect the machine to an air compressor? That's it?
Nice video. But I'd like to know what settings you used for the various thicknesses. What amperage, air pressure.
I don't know but i love welding.
Never done single welding in my life.
try weld you will love it
you must try 👍
It works much better than I expected! I hope my local Lidl here in the US will sell those soon!
Have you purchased items from Lidl before Lee? Here in Ireland there are some great bargains to be had. I bought a mig welder from Lidl for €99, it is amazing.
Thanks for the video! I just bought one of these, but hadn´t been able to test it yet.
5:00 you cut too fast, the sparks must go down because when they go up the material does not cut well and can destroy the nozzle in the cutter.
I think I destroyed the nozzle yeah. Will try better technique next time.
Aparatul are nevoie de butelie de gaz,oxigen,argon? Este de uz caznic si/sau industrial? Se poate intrebuinta ptr.lucrari de intretinere? Pret
Резачек держи перпендикулярно. Где будешь резать помаж маслом или любой смазкой И сопло тоже. И не спеши. Заметишь разницу.
Thank you for your advice.
Силиконовая смазка подойдёт?
@@555GROB555 да, но само сопло надо чаще смазывать. Отработка дешевле😁(как то двусмысленный ответ получился)
@@user-py8ll3vc7i благодарю за подсказку!!!
@@user-py8ll3vc7i ну да, сопло лучше смазывать....
Добрый день, данный плазморез довольно интересный, подойдёт для автослесаря так и для домашнего использования, отрезать лист, трубу! А насчёт того, чтоб смазывать маслом поверхность или колпачок (защитный экран) не рекомендую! Да, первое время колпачок не прелипает но современем налипают окалины и есть возможность привариться до металла, знаю по личному опыту, работаю боле 5 лет на ручном плазморезе HYPERTHERM PAWERMAX 105!
Hello my friend
We asking where we can buy this machine and it is need aircomperson or no need
Waiting your urgent reply
Now I will have to buy one next time i see it, Thanks!
На 10ти милиметровом листе спешил ( полного продува небыло) с такой резкой будут сопла и катоды сгорать
Не сопла а аноды...
@@user-lm9xe3oc9t вот именно, что в такой плазме сразу СОПЛО прогорит и, будет резать в бок
@@Masterognennogoshva Согласитесь,сопло в аноде?
@@user-lm9xe3oc9t В катоде
@@gorin4999 не правда ваша,катод это штырь( если его так можно назвать), а АНОД наконечник с соплом...
brate, jel moze da radi sa onim "kofer" kompresorima? koliki pritisak vazduha zahteva?
I want One and Will buy as soon as arrive at Lidl Portugal. Thanks for the video and explanation tought was more complicated but seems just need compressed air
Why am I watching plasma cutter videos? Well anyways looks like it turned out ok for at home stuff. Kudos. 👍
Go slower on 10 mm plate, and add description on 5:45 that you actually cutting aluminium pipe, a lot of people dont know that plasma can cut it... good video. That plasma cutter can cut stainless steel 10 mm thick, and 12 mm cast iron as well...
Thanks for the tip. I tried to make the video without talking so that anyone can understand it not just us western people who speak english. I'll try to make more informative tests and reviews. I'm not a native english speaker so it'll sound i little bit off. I really appreciate your feedback. It helps me a lot.
Can I cut 6mm thick stainless steel sheet with it.? Please reply?
Super video.
Alles gut dar gestellt.
Ich habe mir vor zwei Tagen den Nachfolger gekauft.
Ich war schon am überlegen es wieder um zu tauschen weil ich mir nicht sicher war, ob das Gerät was taugt.
Jetzt behalte ich es.
Diese tolle Video hat mich jetzt überzeugt.
Danke für das Video
👍✌️
€119 in Lidl in Ireland, bought it but havent tried it yet.
Hi Enjoyed your video. Are the cuts you make testing the tip on the actual workpiece or are you holding it just a fraction above with the support of your hand? Thanks for helping.
Симпатичный и дизайнипроодуман и комплектующие неплохие ..видно что аппарат руками сделанный
Thank you for detailed presentation. It would probably do better on thicker material with bigger compressor, it seems to run out of force.
Все понятно. Где то навыков не хватает не беда. А вот ролик 8мм испортил. Блин. Аж сердце кровью облилось.
Ролик жалко.не продувает метал не правильно держит но ничего научится
One question. Plazma always need a extra air generator? Its not posible that you buy a plasma on the 220 with a air generator inside. I need something like these if you know that kind of variante please tell me. I need to cut a old cistern but i dont have air compresor and i don have 380 plug. Thanks for the answers. ✌️
I don't know of any brand that makes a machine like that. But I would buy one if I knew it existed.
I have tested the parkside perforator, it just worked 2 days. I bought a bosch, 3 years after, I still use it....
I bought a parkside perforator 8 years ago and it still works fine.
Only its box has broken.
Dear is the cutting torch tip touching the work piece?
Yes
Классная вещь.
Во сколько обойдётся?
Is machine ko lene ke liye kya karna padega home delivery a Jayegi aur iski kimat price RS
What kind of gas did you use? Gas or oxygen?
Just compressed air from air compressor.
Are you holding the nossle against the metal? And does it work out of box or does is it need a bottle of gas to work?
air compressor
Нищтяк! Появлось новая мечта
😩
In 1cm width, you has a very high speed of cutting viewing sparks. You have to have a right angle of gas and sparks.
"The arc should exit material at a 15-20 degree angle opposite the direction of travel"
Between -75º to -80º if you consider 0º the horizontal and -90º the perpendicular to the floor. Never sparks should go over 0º, the speed is to high.
Nice to see the different thicknesses. Thanks. Very instructive. Good to have a feel for the limits. The one thing I wonder about those Parkside tools is support, though. I looked for consumables (tips etc) for one of their welders and could not find anything. Is it better for the plasma cutter? If so, where do you get them? If not, are all those tools just expendables and throwaways when you need parts?
I have the same problem. I cant find the tips. Someone said that they found them in some random online shop from china... Gotta do some more internet searching.
Just look up parts for AG60 plasma torch. They are the exact fit.
Is there any gasless version ot plasma always requires a bottle of gas?
OK! What was your verdict and how thick was that rusty plate you cut through???
11 to 12mm thick. I couldn't do it. But someone mentioned it might go if you use pure oxygen instead of just compressed air. And if you lift the torch 1mm off the surface. I'll try someday and let you know.
@@MakeAndTest user error! You go too fast and not steady movement!
What is the voltage? 10 kilo generator will run or not? And what country is it made in?
3 дня спустя: срезал последнюю батарею и выход канализационной трубы, дорезаю отверстия в ложках, спасите меня...
Very good review, clear and concice, no words needs
just one word: WOW !
hi, will it work with Parkside Portable Compressor PKZ 180 C4 ?
Thanks for great videos
I don't have the answer to that. Ask the store where they sell it.
Looks like a nice machine but can't find online
Hya mshin chi kimmt kiti kuthe milhel mshinche nav Kay the kalava
Спасибі за обзор.Якщо є можливість зробіть обзор аккмуляторного інструмента
ruclips.net/video/i6N-mkOv1-w/видео.html
What price
@@MakeAndTest щщщл
KAKO DA KUPIM OVAJ APARAT O
I IDELI ONAJ MANOMETER SA PRIKLJUCKOM IZ APARAT MOZELI DA VARI KOJI GAS KORISTI
В Германии в Lidl продают инструмент этой марки позиционируется как бытовой но в сравнении с нашей китайщиной которой торгуют в фикспрайсах и других торговых центрах конечно парксайд выглядет достойно. вроде как французская марка.
У поляков в Лидл тоже есть.и цена божеская.
В Лидл во Франции есть он тоже. Вопрос тем кто имеет его - расходники на него где брать - сопла, электроды ?
Pouvoir acheter un découpeur plasma chez Lidl parce que c'est pas cher, c'est sympa pour les bricoleurs, mais où trouver les pièces d'usure ensuite, sachant que buses, électrodes et tuyères peuvent se dégrader TRÈS vite?
J'imagine qu'il ont un site internet ou tu peut les acheter ou alors amazon
Интересно из под компрессора воздух используют или кислород?
kompressor
Макни в отработку! И продуй кислородом.....
I just saw a vid about the same cutter. The man demonstrate that it cuts 10 mm steel . Not so easy but he had a whole selection . Seems good enough . Are the power cables capabel for 40amp ? Reinhardt
Привет сколько стоит этот плазморез?
179€
Какой компрессор для него нужен?
@@MrPos007 4-4,5 bar
How much is that price/cost?
У меня такой же. По кузавщине вообще кайф.
За скоко и где брал?
@@user-ru5cr1ob7d в южно сахалинске, а привазили с кореи.
@@user-ru5cr1ob7d Jiangsu Boda Plasma is the biggest Hypertherm OEM manufacturer from China. we make upto 600 cutting machines (including the gantry, cutting table, rails, dust connectors)per year. for more details, Please contact benny.wu@bnkmachinery.com
Do you recommend this plasma Cutter? or any one used it. please advise ?thanks
السلام عليكم من فضلك المكينة موجودة في تونس أو في الخارج
LIDL
Mustapha Mohamed ابحث في بنقود
@@sharzanco سوم موجود في تونس
where is the product, what price, buy it from Indonesia where ????
Never saw that tool for sell in my country. Too bad. What country are you?
Germany.
I see a lot of Parkside stuff in Aldi food stores in Germany of all places. Not the ones in the US though.
Merlin Cat Parside is the Lidl brand for tools
WOW I didn't expect it to be that good.
You don't need to clean your steel. That's half the point. Sometimes with the earth, yeah, but it will cut through paint and dirt easily enough.
Thanks for the advice. :)
Isme kon se gas use hoti h aapne video m nahi dikhaya
Where can I purchase a machine like this please comment back thank you very much very nice it works very well
I bought it in Lidl
Salut salut
S'il vous plaît quel compresseur dois-je utiliser pour un poste cnc plasma de 50A
At least 200l, maybe more.
Quanto custa a máquina?
До 10мм сталь берет. Просто, а какой смысл что он на плите уголок срезал😊 если продольный рез не получается?
You have to wait the arc to cut before to go forward!
प्लाज्मा कटर मशीन कितने प्रकार के होते है, इससे कटिंग के साथ साथ और क्या वर्क कर सकते है । जैसे - दो वेल्डिंग किये मेटल को अलग कर सकते है? कितने मोटाई तक असानी से कटिंग कर सकते है? कृपया बताऐ ।
salut t as buse ne doit pas toucher le métal , 1 ou 2 mm
Thank you for advice. I will try next time.
@@MakeAndTest de rien autrement tu vas en user beaucoup des buses
Very good product from lidl.. I'm from greece
Плазменный станок с программным управление м вот это дело было бы😁
это было бы прекрасно
This tool is only for cutting metal ???? Does it work for welding ???
only cutting
Amazing, but still do not have medicine
For coronavirus...😅😅😅
Yes, it's called Nigella Sativa or Black Seed Oil. It's not only for Coronavirus.
У меня в гараже стоит профессиональный резак, новый продать не могу. 👍👍👍
parkside впринцепи неплохин интсрументы, у нас в англии этот бренд продаеться в обычном продуктовом магазине Lidl, это впринцепи немецкий бренд
is there a link to buy this welder from Amazon ?!
Brutaaaalll!!! Quiero uno 😭😭😭😭!!!!
Ребят подскажите, прогревать метал до красна можно этой штукой?скажем так старое заржавевшие резьбовые соединения.
Банкомата и сейфам хана!!!
Ага-нужен ещё -генератор,прицеп,компрессор!!!
Ye plasma track body me kam karega Or kitni price h oxijan ki jaroorat to nahi padegi
really cool laa plasma machine what price boss. greetings to meet me from Indonesia. greetings 1 hobby
Sayang produk merk ini ngg ada di Indonesia 🇮🇩
Price is 8n description
Скинь ссылку где купил. Какие требования к нагрузке на сеть (сколько ампер) и к компрессору (давление и производительность)?
www.lidl-shop.cz/PARKSIDE-Plazmova-rezacka-PPS-40-B2/p100279837?mktc=shopping&gclid=Cj0KCQjw6sHzBRCbARIsAF8FMpWzI-FI0WCwBRprdxQB5Tq72_F4q-ReQOujPcNAKPYUZoJ_8iHQ_tgaAud2EALw_wcB
200evro
É os bicos de cerâmica há para manutenção
Choose it but where got it ?
I bought it because it was so cheap. Still have it in the box 😅
Where did you find it?
Do you want to sell it? 😁
выходят что для резки нужен только компрессор и данный резак? я уже купил себе сварку от парксайда за 100 бачей, такой себе полуавтомат без газа, очень крутая за свои деньги.
Ein super Gerät, ich habe den Plasmaschneider auch im Einsatz (sieht man auch regelmäßig in Videos auf meinem Kanal). Viele Grüße Nico von Nico's Projects
You always cut. Doesn't merge with it?
Я так понимаю металл должен быть чистым , даже покрашенный не возьмёт или ржавый.
Берет ржавый
Крашеный не резал
What is the voltage? 10 kilo generator will run or not?
Donde se.vende y cuanto cuesta
LIDL 149€
This plasma cutter machine is super.and you will mention the price hp and their address
Сам аппарат ???? А вот рукавчик то надо прикинуть ...
Bonjour , je souhaiterais acheter votre "coupeur" à 149 Euros .Pouvez vous m'indiquer la marche à suivre . Ou dois-je payer ?
Блин ролик зачем испортил , чем он тебе не угодил ??? Такая хорошая деталь была !!!!!
Is the machine can be use for welding purposes?
no. But I will be unboxing ona that can weld soon. subscribe