OVERSEEDING IN 3 STAGES, THIS IS THE REAL TEST!! & THE JOB I WISHED I NEVER STARTED!!!
HTML-код
- Опубликовано: 9 сен 2024
- In this video we put our new Rakeman 3000 and APV broadcaster to the test on paddocks that got really badly cut up last autumn, will overseeding replace ploughing?? And i tackle a job that should of been simple but really tested my patiences..
If you enjoy our video's then why not hit that Subscribe Button
Give us a like and comment at will
You can also follow us on
Instagram: / ifarmwefarm80
Facebook: / ifarm-wefarm-101507381...
You can also check out our new website at
www.ifarmwefar...
Donate Paypal paypal.me/IFar...
Jefferson 160A inverter welder
Online Store www.mccabefeed...
We purchased our Rakeman 3000 and APV broadcaster off
Lakeland farm Machinery Castleblaney Co.Monaghan
/ lakelandmachinery
For the kit i use you can purchase them
here, it won't cost you any more but it will support the channel.
Camera's
GoPro Hero 9 amzn.to/36CmKQF
GoPro Hero 8 amzn.to/2HYBnU0
Canon M50 amzn.to/34qUtJW
Drone's
I've been using drone's for over 20 years and i've had them all, these are the best.
DJI Mavic Air Original: amzn.to/33DNj5X --- Used in this video and highly recommended.
DJI Mavic Air 2: amzn.to/33Fqwa9 --- Faster, Better battery, Range and Image Quality.
Camera Mounts
Most of my outdoor Shots The Magnetic Camera Mount: amzn.to/3ko1Ngx
For my in cab chat's The Suction Cup: amzn.to/3javS1F
Used in all my video's "Simply Brilliant" The 3 way selfie stick: amzn.to/3o2wKc2
For them hard to get shots The Flexible Jaw Mount: amzn.to/2He69s7
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
Best part of a Sunday morning 👍👍👍
A great watch of a Sunday morning.
For sure! I am learning so much about grass and pasture land. Adrian, you made me smile for sure. That bolt was REALLY worn. I can see why you had to get out the big hammer.
Thanks for sharing what it takes to establish a really good productive pasture. Hope to see the end result soon.
I was doubtful if the harrows were heavy enough for that field but, as usual, I was wrong. Fine job as always also that tanker was a brilliant upgrade to a sensible size 👍. Always look forward to your Sunday videos 👍
So was I at the start, if I lowered that harrow even further it would rip up a lot of soil, 2 or three runs would be like reseeding
Brilliant video Adrian can feel your frustration at end of the video that's machinery for ya 👍👌💪
Keep up the good work that's a good tanker u got keep up the good work on ur RUclips channel and the vidoes they are very good
U have to paint trailer red, love ur massey
My mate Dave's done it a few times 🤣🤣 Silly Dave 😜🤣🤣 Great video, thanks.
Beautiful pups. You're in their realm. 😁😁
I fully agree on you comments on the Amazon spinner.. Great machine only complaint is that it never empties completely ☹
Well done on the videos... keep them coming
worked with a mechanic one time one off his favourite tool was the persauder ie slege hammer.i like ur two health&safety officers adrain 😀😀😀
love how hudson is speaking to you bless him
I am always so impressed at how clean and tidy you keep your farm. On the other side of the spectrum is Tom Pemberton . Although there was a moment a few weeks ago he was cleaning out the big shed but right at the last bit he didn’t go that extra inch with the pass that makes the difference and now it doesn’t look like it has been touched.
I know he watches your channel and maybe it is influencing him into realising that the first big clean is then followed by much easier .
Often wonder how he passes his farm assurance inspection with the place looking like a tip
The Pembertons run a great show, I personally know Tom and I can tell you one thing, he’s a great worker. Wait to you see what’s coming up on his farm very soon. Thanks Helen 👍
@@IFarmWeFarm Oh I follow him too and know he’s a great worker and the plans for the new shed and his presenting job . I have joked to him about cleaning and he has mentioned how clean yours is and has plans .
I know you know tom and I thought you had seen he was wanting to get like yours .
@@willmoore3790 It doesn’t look like a tip .
@@willmoore3790 His place isn’t a tip .
Yours is the only farming video that I watch without another app going at the same time. In other words I actually pay attention to yours.
Spring tine harrow. Thanks.
Rakeman 3000, basically called a spring tine grass harrow
@@IFarmWeFarm Thanks so much. You put out great videos.
Great video, love the channel. Love the massey!
I like the phrase "working words"
Made me smile! How brilliant!
Another great video,absolutely no idea why there’s numbers of thumbs down,Honda engine may have hair line crack around it,buy a new one,you have a lot of work too relying on it,keep old one back for spares.
Remember thumbs down doesn’t mean they didn’t like it 😜. Thanks mate
Nice one Adrian , nothing like a bit of hardship eh 😜
Well done great video 👍 allways great to watch on Sunday morning
Great video you’re the man to change them pins.
Absolutely love this channel if only could be on everyday 😀 any jobs going 🤣 keep up the good work 💪
We have a 6tone fraser 45 years old and never a part replaced except a rim and a tire it has super singles but they are cracked but still last year it moved 100 tones of soli on are 4340 zetor
Great video nice 👍 looking job always be safe working on a trailer Adrian 👍👍🇬🇧🇬🇧🏴🏴🚜🚜👩🌾👩🌾
Genial Video enhorabuena desde TractorPasion (web y revista de maquinaria de españa)
Hi Adrian when I go doing that job I spread soiled water the evening before and it will soften the top of the soil and make your job easier.
That’s a good idea and would work well, I forgot to say on that video the ground was rock hard which doesn’t help. But it done really well cause that was very rough. Thanks Tim
Be worth having a look at the MicroBull tacked loader, be a handier yoke round than the little scraper. Bit of a difference in price though...
Great video Adrian looking forward to the next one
That’s why the fenced Downing Street stop farmers getting mixed up with slurry valve after driving there
Great video good see trailer sorted you speak sense 👍👍👍
have same welder love it the grass harrow is doing good job
Great video ideal for the Sunday morning entertainment. 👍
Put some patio cleaner on the sides of the trailer workes wonders
Could have used a Sawzall and cut on inside of frame
Spot on sir. Thanks alot.
That Abbey 2000 gallon tanker looks well on the 6470 👌
Just started to watch your videos mate. And what a joy it as been, awesome mate, all the best, Martin from sunny Devon
Get a new one and fix the Oder one and have a back up yard scraper
Adrian, we had a 902 amazone before
You can adjust the shutters so they spread evenly
One side is either opening too much or not enough, a bit of adjust on the threaded bar should sort it
Leave the field for silage if you could. Would really thicken up. Brilliant video 💪🏴
Yes that works well
Great video. The dogs are beautiful.
Great work Adrian keep up the great work 👌👌👍🐄🐄🐄🚜🚜🚜
You could get 50 ewes running around on that ground for the months November December and January they do some job on ground I put some of my ewes away to winter grazing and it suits me and the host farmers
Problem there is keeping them in the field, my land although well fenced wouldn’t be able to contain sheep unfortunately
Thoughtly enjoyed this video. Me personally would of got the pins machined to add grease points on them to future proof the pins for a little longer 🙂
Great video Adrian lots of jobs done 👍
If it is possible some tractors have lockable spools
If I was you adrian I would buy a new petrol yard scraper because if u buy a new engine it could do the same thing and the rooting off putting the engine in
Don't let your trailer down at high reves
Great video, still cold here and still getting lot of frost in mornings. Hope weather isn 't affecting milk production too much.
I often find if your at a pig of a job and nothing works no matter what you try then walk away.... Have a cup of tea or a smoke or best of all a pint and you you come back to it the solution presents itself. 😉
I actually did just that, very wise words 👌👍
Good video Dave, lots of stuff on it
Very Enjoyable look forward to next time😎😎
Hoping you get some time to enjoy the bank holiday weekend Adrian 🍻 slainte 🏴
go raibh maith agat 👍
Mighty work with the reseeder Adrian, valuable asset for sure but to be fair as you rightly said a tool for the modern progressive farmer !! Regards the pins for the tipping ram......PMSL......nasty bas***ds to change but a grease nipple and a strong pin and bushing set up are a must....it's wherevall the weight and force is after all.....stay safe amigo.!!
Good job with the ram. Better doing it that way as if you applied the gas torch on it could have ended up heating the ram and burning out the seals
Great video Adrian, its not the size of your hammer, its how hard you swing it lad!
Great video 😀
Always look forward to your video’s Adrian. Cracking channel
Great interesting video again 😀
Nice trailer. Will be nice when you give it some love and a coat of paint.
445/45r19.5 👌
Stage 2 is always the stage of regret for starting the job as you know you've already gone too far to turn back
That’s Stage 5, it’s never a good idea to record that 😜😜
If you hit 2 stage 5's a week youre in trouble
@@johnmcgee9159 where did he call me out? News to me
@@johnmcgee9159 have you really got nothing better to do than look through comments for mine 😂 I'm honoured that you care for me so much ❤
@@IFarmWeFarm I was wondering when dear old John mcgee would be back. If ya click on the link it will bring you to georges video from 10 months ago, I left a comment there because he was revving the living fuck out of the pump and had 4 ~15ft pipes connected onto each other (if my memory serves correctly) I asked him why doesn't he back up all the way and it would put less pressure on the pump to draw it that far and also said you mustn't care about the pump the way you are revving it (which i meant in a humorous way but he didn't see it that way) he pinned the comment and said about how I get the privilege of being pinned for knowing so much about vacuum pumps
Thats basically it 😂
(Looked back through the video and it was 3 20ft pipes)
Pig slurry, you cant beat it - im sure i mentioned this last year
Yes it’s great but in small amounts, it can leave ground wet as it kills the worms if overdone
Great video as always 👍
Great video as usual. Farmer Phillips demoed the amazon fertiliser spreader you mentioned if you want to see what they thought of it .
Loving the vids adrian
Good show
Yeehaw
Gerry on the digger 🤔@gerry6420 coming with the mcCualy low loader and the 6930
No not him lawd
Different Gerry, would make a good video if it was though, Take him for a spin on a real tractor 😜
@ifarmwefarm I'll need to bring ye both on a real tractor 'no gem like a tm' 😂💎🚜
The bigger the hammer the easier the job.🇮🇪🚜☘️⚒️
That's my thinking too,just swing a bigger hammer at the problem, I had a famous 14lb sledge when I worked on the sites,never failed to move what I wanted moved. 💪
Regarding the super singles on the trailer Adrian, they aren't as reliable in the bog as a set of doubles 👍😂😂
Bigger Hammer I like that.
Hello from Brazil/Curitiba. The result was good? I hope so.
How many gallons to the acre are you putting on with the slurry tanker>?
About 1 thousand per acre
U should’ve put something rlly strong underneath the trailer and used the ram to bend the pin back
A ram wouldn’t have the pull Back strength, that bend came from lots of heavy loads over a long period of time. Thankfully all’s well that ends well, I like giving myself hardship 🙈😉
When there is something is wrong just get a sledgehammer or what we do if we can is use the loader 😂😂😂
Flotation tyres over supper single
Great tune on the slurry part! 😂
Syn Cole - Music keeps me dancing, if anyone’s wondering!
Great video lad 🤙
Adrian could you do a video on your process of ai from the cow getting drafted all the way through to her getting served ?
I’m sure you have a great system for it
Adrian it’s not the size of the hammer it’s the way ye swing it
True 🤣
@@IFarmWeFarm Oh my! So it is hammers we are talking about, are we?
Spray WD40 oli over ur fertiliser spreader when it's dry after washing. Save the machine.
I use diesel and oil mix, that sower is 12 years old so it’s doing a good job 👍
What seeds are you sowing and how many pounds to the acre are you putting seed out?
Great video as always, quick question where did u get your power washer and attachments for cleaning down your machinery, also what foam do you recommend
I got my washer in John o’connells Baileboro, years ago. It a TX 12-100. There pricy but worth it. You can get them in most good hire shops.
I keep changing my foam and never pass to much remarks on the brand. Buy in in 5 gallon drums. Most Co.oops and auto shops will have that 👍
You need to make T-shirts 😀"Not working out? Just use a bigger hammer" Thanks for the laugh. I need to overseed too. Using a spring tine harrow and a broadcast seeder is brilliant. I thought I would have to buy a no-till seed drill. My ground used to be part of a dairy (closed on the 1970s) and the ground is still high in phosphorus (low nitrogen, so wanting to overseed with a bit of white clover - will be a horse pasture - and mixed grasses). Do you have any issues with excess phosphorus from spreading dairy slurry?
No actually our land was low in phosphorus on our last soil test, PH was between 5.3/5.8. So we are liming our land this year. I would worry about nitrogen levels, just get the P & K correct. A high phosphorus level can leave cattle lacking in Copper so watch out for that one. Rare though
It looked to me like the ram was too long for the trailer? I was thinking if you lifted the body a bit more the pin would come out.
I goty boots of them
Did u change one of the leads out of the welder. I have the same welder and theres a different thing for holding the rods
Yes I always upgrade to a heavier duty earth and rod ends, the cables are the same. There not expensive and stand up to way more abuse.
What is that little gas cylinder heater you used there and would you recommend it for heating for small jobs like seized lift arms, plug in a roller seized etc
It’s just a hand held gas torch, most hire shops or Hardward stores should have them, there very handy but not as hot as the larger bottled gas. Still great for small seized bolts and stuff like thst
If you see this was the overseed a sucess
Looking back at your videos .. why don't you look at a kid 9ft topper..thay r good for the money.
No would never go with a topper again once we have the disc mower. Massive difference in grass growth and thickness
Hi Adrian, do u know the way u said before it takes 35 cows to pay a man is that if u have 50 cows and does it include everything else like fertilizer and nuts or does it just pay one mans wages
No I have a family and bills to take care of too which requires full time commitment. There’s so many factors involved like weather and market prices too so it’s impossible to really answer that question as everyone’s different. I’d hate to see the man with 50 cows or less disappear, the next 10 years will be very important
@@IFarmWeFarm yes my dad agrees the small man is more important then the big man
any update on how this worked out
Can’t wait to see the result in grass reseeding ,how long do you have to wait for results ? Great 👍 video as always
Need rain a heat badly.
@@IFarmWeFarm Wish I could send you some of our early temperatures-it was over 90 degrees F in my car yesterday in central Florida and it is only the first week in May.
We’ve a tipper trailer like that, but like u said it has super singles and there is one major flaw that we have learned the hard way 😅, that is when on Unlevel ground the trailer is way more inclined to Tipp over as when the weight goes to one side it is a lot of pressure on one tire.
That’s true, it is a plus there. Ah it’s grand but they can drag a lot of muck out on the road which is frustrating at times
Have you used the seeder b4. Fine lookin job
Ever use the Guttler or sms for reseeding?
No never used them products Ritchie
C'mere...... forget the farming, that's just work. Who's cutting your hair for ye above in Cavan? 🤣🤣🤣
The other half at the min, just have to approach her when she’s in a good mood 🤣🤣
Youd be better with flotation tyres
👍🏼👍🏼
Good video Adrian, be interesting to see how the field turns out. Watching from my hospital bed, got abscess in my back from a broken air seat in my digger🙄 hope the case is alright, haven’t seen her in a while.
Ah crap, wish you a speedy recovery. Not a nice place to be anytime. Case is great but if to get a new clutch fitted soon hopefully