Great video. I would definitely recommend changing the transmission as well as the demand drive fluids at the first 25 hour mark. Its important to remove residues and metal filings left behind from the manufacturing process. You would be surprised how dark the transmission fluid will be.
I just bought one yesterday. Other than tires we have the exact same quad and I'm saving this video for maintenance. Thank you so much for letting me know about the grease fittings.its probably going to be needing service in about 2 weeks as I don't actually trust dealers and their "we did maintenance" great work!!!
Just plain thank you great video I tried every oil filter wrench in my inventory and finally called the dealership I bought mine from and I had that damned oil filter off in 20 seconds
Just paid dealer $200 for my first 25 hr service but this will help I’ll do it myself next year. Great vid. Appreciate the explanation and showing good camera work.
@@Channelofdk We used a torque wrench and had it at the correct setting, but I never heard or felt the click and just kept going until I realized I was doing it way too much. We had to use pliers and a screwdriver to get the bolt off, because the threads inside the pan were completely destroyed. The bolt itself was fine though. It sucks, because the skid plate is welded on, so changing the oil pan requires taking out the whole motor. We used a heli coil to try and repair the threads, so I'm hoping that worked. It doesn't seem like it's leaking, but I'm worried that water will still seep through and get inside.
I just bought my first Polaris at Honda east In Maumee ohio and the first checkup at 20 hours was performed , which included a oil change and checking all the other fluids and moving parts. They did replace a sheared pin on my plow the total was $352.00 and said that was for 2 .5 hours of work , seems very high to me especially since it barley had 20 hours on it.
That price is high but not much different than any other dealer you would go to. No need for the dealer on this service, unless you have too much money and too little time.
Don't forget the rear driveshaft zerk fitting. Pop off the oil check door, rotate the driveshaft by moving machine. You will see the zerk fitting, and grease it. Extremely hard to reach, have to pop off panels and footrest. It's a pain on my 21
Man, I have a 2022 sportsman 450, there is a hole on the bottom of the bike under the zerk fitting, I was able to lube mine from the bottom, no need to take anything apart !
Great video. I would definitely recommend changing the transmission as well as the demand drive fluids at the first 25 hour mark. Its important to remove residues and metal filings left behind from the manufacturing process. You would be surprised how dark the transmission fluid will be.
I just bought one yesterday. Other than tires we have the exact same quad and I'm saving this video for maintenance. Thank you so much for letting me know about the grease fittings.its probably going to be needing service in about 2 weeks as I don't actually trust dealers and their "we did maintenance" great work!!!
Very detailed and informative without being too long. Thanks for posting!
Just plain thank you great video I tried every oil filter wrench in my inventory and finally called the dealership I bought mine from and I had that damned oil filter off in 20 seconds
Try strengthening your grip with squeezing exercises.
great video. mine is due soon for its firs 25 hour service and this was very helpful.
Just paid dealer $200 for my first 25 hr service but this will help I’ll do it myself next year. Great vid. Appreciate the explanation and showing good camera work.
I should have done the same, because my rookie ass ended up stripping the threads on the drain pan.
@@delta1525 damn that sucks to hear. Wonder if they use the cheapest metal possible for the bolts.
@@Channelofdk We used a torque wrench and had it at the correct setting, but I never heard or felt the click and just kept going until I realized I was doing it way too much. We had to use pliers and a screwdriver to get the bolt off, because the threads inside the pan were completely destroyed. The bolt itself was fine though. It sucks, because the skid plate is welded on, so changing the oil pan requires taking out the whole motor. We used a heli coil to try and repair the threads, so I'm hoping that worked. It doesn't seem like it's leaking, but I'm worried that water will still seep through and get inside.
I just bought my first Polaris at Honda east In Maumee ohio and the first checkup at 20 hours was performed , which included a oil change and checking all the other fluids and moving parts. They did replace a sheared pin on my plow the total was $352.00 and said that was for 2 .5 hours of work , seems very high to me especially since it barley had 20 hours on it.
That price is high but not much different than any other dealer you would go to. No need for the dealer on this service, unless you have too much money and too little time.
Thanks John,
That was great! everything I needed to know. just got it done. When should I do the demand drive?
what about the diff fluids? i have 2021 it needs at least rear diff new fluid? and couldnt find any nipples on mine. i know where too look now though
great video, thanks for posting!
So easy thanks for the quick run down
Thanks for the awesome video man i really appreciate it. Im not paying 250$ every 25 to 50 hrs
Great video John. Can you do a review of your handbike i see in the background?
Here is a video of that hand cycle, not really a review. ruclips.net/video/LZvOLjmPwDw/видео.html
How did you reset the service indicator?
That is what I was just thinking
Great video. How much was that lift?? $3K
It is actually a Danmar Car lift. 7000 lb. I think they are about $2200.
Thanks for the video it help me a lot
Great video thanks for sharing
👏👏👏👏👏👏👏👏👏
Great video sr, thank you
Don't forget the rear driveshaft zerk fitting. Pop off the oil check door, rotate the driveshaft by moving machine. You will see the zerk fitting, and grease it. Extremely hard to reach, have to pop off panels and footrest. It's a pain on my 21
Man, I have a 2022 sportsman 450, there is a hole on the bottom of the bike under the zerk fitting, I was able to lube mine from the bottom, no need to take anything apart !
Thank you
Shit, I guess I don't have any excuses now....