DIY: Loud Bluetooth Speaker
HTML-код
- Опубликовано: 11 сен 2024
- Homemade portable bluetooth boombox
20w speaker: bit.ly/2JwX0Ic
BT module: goo.gl/sPKZUB
or bit.ly/2Vb7Qbj
52mm radiator: bit.ly/2XB27Mv
4S PCB: bit.ly/2NHOgV2
4S meter: bit.ly/2xERm1c
Power jack: bit.ly/3a5hGTx
18650 Batteries: goo.gl/ksddQG
or: goo.gl/iS1MTW
18650 Holder: goo.gl/rFrv2S
or: goo.gl/QNiQUh
Drill Bit used : goo.gl/jmh3AP
or: goo.gl/VpJbLE
-2 inch 4ohm speakers, 52mm radiators for extra bass power.
-Width 27cm, height 6cm, depth 5.5cm.
-Painted with black mate spray can.
-Schematic at 6:54.
Copyright free Music list:
[Royalty Free Music] Trip KV
ZAYFALL - Dream to live [Official Music]
RetroVision - Hope [NCS Release]
Max Brhon - Humanity [NCS Release]
Coopex & NEZZY - You And Me [NCS Release]
Raiko - Lightning Child (feat. Remi Willow)
Raiko - Revenger [NCS Release]
Max Brhon - Humanity [NCS Release]
( 4S 30A 14.8V Li-ion Lithium 18650 Battery BMS Packs PCB Protection Board Balance Integrated Circuits
SANWU® TPA3110 DC 10V-25V 2x15W Dual Channel Wireless bluetooth Audio Power Amplifier Board For 4/6/8/10 Ohm Speaker
4S Single 3.7V Lithium Battery Capacity Indicator
HXAMP Round Woofer Passive Radiator 35.5MM 52MM 62mm 67mm 75mm Bass Vibration Resonance DIY For Home-made Low frequency 2PCS
Full Range Speaker 2 inch 4 ohmm )
How to make a compact loud boombox with big bass, Start to finish full video
#DTekDIY
Links, music names and more infos in the description :)
I need help I want to build this in the pic into a portable speaker with bluetooth
I have 3 6 watt, 1 5 watt and 2 3 watt speakers
I would like the battery to last as long as possible
and would like to put lights in the change with the beat
I've never done this before
give me a $100 budget and a under $100 budget example parts
hope you can help
if I can I'd like to use all the speakers but if you think the 3 six watt speakers would be loud enough I'll trust your judge meant
Can I Buy This speaker....... price??
Homemade wooden speakers are very beautiful .
I have a clip to make a speaker with a jar is also very interesting
super sound clarity
I really enjoyed watching
Absolutely Brilliant ✨ ✨
Thank You so much 😉
Tanks
great work.
i really enjoyed your video except where to much ads on this video
How long can it play with a full charge??
Your speaker videos are awesome 😎😎😎😎😎
thanks
Very good sound.
4:33 is cool ❤️
ah ah tanks
The kool thing about this was the use of passive radiators.
super
Great speaker!keep it up!
Your videos are awesome, please think about a diy sound drum speaker if possible next time👌✌👍
If you would know something about acoustic shortcut then you would not put passive radiator on the same side and nearby as loudspeaker. This is not good for bass.
I really enjoyed watching! Keep on doing such videos! But Is it possible to add an aux in jack?
yes it is, but with a different audio module
D-TeK Thank you for answering
Nice speaker, but you need some rubber feet/pads on the bottom to stop it from sliding!
Plus, I'd also get that soldering iron/tip replaced (why such the angle?) and I'd also avoid those cheapo looking 18650 cells.
Круто получилось !
Согласен
Very good
Hi DTEK, I assembled my speaker using your video. Mine was left with some "defects." My notes: 1) I used MDF (04:28), despite painting with a previous base, the finish was horrible. 2) I have had some reboots in the sound system, when there are somewhat high peaks (not too much), I tried to add resistances but completely overshadowed the sound. I removed them. 3) The battery charge indicator (03:18) does not work properly, it always shows all the blue bars and the red frame around it, whether or not they are fully charged. 4) I did put the sticky legs (08:28). 5) Sound with balanced bass and treble. 6) Passive radiators (00:22) do not have the movement seen in your video (08:49). What did I do wrong? 7) I have not established battery life, but I dare say no less than 8 hours at medium volume. 8) Use another amplifier board, apart from the bluetooth it has auxiliary input and throws 30w according to specifications. 9) I asked for 30W speakers but they sent me 20W :-( 10) To be more compliant, I'm going to move the components to a new pine wood box, I thought that maybe unpainted looks good, but changing the way of assembly the box in order to avoid seeing many "junctions". I have not got an LED equal to or similar to the one you have set (08:13). The LED that I have put on it is too bright, obviously I put a resistor to prevent it from burning. Thanks, I like its sound and more than agreeable. Also, I remembered some electronic bases.
Hello, i´m going to try to help:
1) I just sand it and aplly a few light coats of spray paint can, betwen coats i sand it a little bit after aplying a new coat, its important to do light coats for an smooth result, i didn´t sand the last 2 coats and the final coat i sprayed from a bigger distance to give a homogeneous look.
2)With this amplifier module i never had any problems even in max volume, maybe your lithium bateries are with a bad discharge power.
3)Maybe you choose the wrong indicator, in this case i´m using an 4s indicator because i´m using 4 lithium batteries.
4)After the video i put it too.
5)So you choosed a different amplifier, i choose this one because its a very ballanced amp but you have hundreds to choose, you said before that the amp starts reboot at high volume, that happens when its not receiving the amount of voltage/amps needed.
6)If the passive radiators are not moving could be that your case is not complety air tight and a minimum amount of air is excaping , press one of the radiators down, if the case is airtight you will see the speakers moving up and remain in the same position untill you take your finger, if you press and the speaker goes up and then start to go down is because you have an air leak, check also the polaratie of the speakers, if one of them is reversed wiring they are going to cancel the movement as one moves foward and the other backward at the same time.
10) about the led i have used the boards led with an clear piece of plastic to reflect the leds light, its hard to see 7:44 but that piece of plastic is right on the top of the led of the board.(can check this video ruclips.net/video/qyhK7YHiFyo/видео.html at the minute 16.28 you will see same "technic")
Hope my comment helps ;)
Sounds like it wasn't fully sealed. Did u use a sealer on the back panel like he did?
Also, better to use veneer but if not, when u paint only halfass coat it then wait 20 min and lightly coat again. Much better to miss places on a single pass cause itll cover next coat.
Огонь! 👍👍👍
Worlds fastest hand sander!!! 😮😮😮
hi! Could you post links to connector and button for battery charge level check.
Hola. Cuanto costaría si te pido que me hágas el mismo altavoz?
Nice video this time. Did you use 15 watt speakers?
tanks, 20 w speakers
Por favor, ¿qué tipo de madera usas? No puedo establecer (parece pino) ... y con qué material cubres la caja. Ya ordené las partes :-)
Edman Vega I used to use MDF when I built subwoofer boxes
Top!
good design but lacking an adherent foot
True !
Good design? It just look like a black brick
Enjoy the video brother
Nice bass niqqa😂
how can I install USB charging module with this method along with power jack ? Please reply me
Alguem sabe o nome dessa brocs que faz o buraco do altip galante
How much you want for that speaker ?
100$?
Can 3inch speaker will play loud ??
💓❤💓..👍👍👍👍..keep it up bro
tanks
Koi giveaway kejiye na sound ka
Winner a JBL extreme super speaker eres un genio
thank you d-tek
tanks, glad you liked
What charger are You using to this speaker?
What is the wood you are using?
Its an premaid box that i resize and reshape, its made from plywood and pine.
@@DTeK thanx a lot
The main frame is pine, I calculate thickness of 8 millimeters, right? For the covers, front and back, I think you can use MDF instead of tripay. I planned to use MDF for everything. I just have to find the right thickness, what do you think? I already have the parts, I'm only missing batteries, cables, paint and some other things.
great video, but why did u use 4x3.7v batteries if you could have easly gone for just 3x3.7v?
Some 12v amps need more than 12v to operate without distortion. Depends on the specs.
How long should a charger be to be able to charge the batteries?
to charge it? its an 16.8 volt litium charger
Já mandar você fazer um pra mim, mas você não é brasileiro.
Te quedo bien chido
Bhai sell bhi karte ho Kya
I was always curious if those circle cutting jigs worked for people using a hand drill.
Bahut must
Керемет👍
Can I buy this speakers?
Can I Buy this speaker
Me podrás hacer uno con pantalla
ตัวนี้ขายเท่าไรคับ
Which charger do You use to charge these batteries how many volts?
Use a charger with 16.8volts
A cuanto lo vendes $$
zajebiste daj jeszcze jakieś wytłumienie
Quanto custa
What's difference between TP4056 and your Lithium 18650 Battery Protection Charger BMS PCB Board?
The one that i used is a 4 cell protection board with balance function (4x 18650), the tp4056 is for a single cell use (1x18650).
@@DTeK can't you use LM2526 Buck Converter cum Step Down module with your Lithium Battery Protection Charger Board for more precise voltage settings in order to safeguard with additional protection?
8:19 song?
All the links and music names in desciption :)
Too much electronics crammed inside, no room for the drivers to do their job well. The frequencies they can reproduce must be pretty limited in the bass and it must lack decent high frequencies as well. And it sounds overall well ... crammed and muddy.
It sounds nice, i could have added some tweeters, but overall these speakers have a good frequency range, like all of my builds its the real sound from the speaker and not an mutted speaker editted in the video editor with a song added after :)
need some rubber feet lol
true, its fixed already ;)
Hello bhai mare pase 4 ohms and 12 W na 2 speaker Che to kayu module use karvanu
Bhai ye google mein paste kar
"AIYIMA 15W*2 Bluetooth 4.2 Amplifier Audio Board Stereo Two Channel Amplificador AUX Wireless Bluetooth Receiving Modification"
Bas volume full mat kario.
Hello tell me the size of your column
hello, all the details in the video description
@@DTeK ok thanks
Sell karte ho to
I wait buy
You should have putt rubber feet on it so it wouldn’t move around
Do you want giveaway this product If yes please donate it to me
1 где блять резиновые или силиконовые ножки?
Их блять нет
@@kurda1062 😂😆 тогда пускай на полочке дома играет
Их блять тяжело приделать?
@@ruslanzot1714 да😆😂
Непроще два динамика і одна басивна мемьрама
Пассивные динамики должны быть по площади равны площади динамиков)
Тогда можете объяснить что тогда в tronsmart force
Там пасивка меньше чем динамики
Если кто-то скажет что дело в весе пасивки или мягкости подвеса то будете себе противоречить
Нахуя мембраны коньченые в колонки
А какие надо?
NO AIR HOLE NO BASS AT ALL I GIVE YOU DISLIKE SORRY BUT TRUE NO BASS AT ALL
Fake sound
What charger are you using to this speaker?
Notice how his batts went in spring loaded holder? Their most likely rechargeables he takes out and charges in a stationary charger
16.8 V lithium charger