LX200 Main PCB Repair C8

Поделиться
HTML-код
  • Опубликовано: 18 янв 2025
  • НаукаНаука

Комментарии • 6

  • @jbar6618
    @jbar6618 3 года назад +4

    When my control panel cap blew I went ahead and replaced all. I found the easiest way with less risk of damage was to wrap the cap with tape and then crush it with needle nose pliers. I next trimmed the remaining leads, leaving enough length for me to solder the new cap to. Where the head room was limited I laid the new cap on its side. I replaced all of my caps in a few hours and never risked damaging the pcb.

  • @sweillerYT
    @sweillerYT Год назад +1

    Can you show on a small video what you would have done if the new caps were tantalium ? Like showing in great detail where is minus, plus ... Thanks

  • @vitalieBu
    @vitalieBu Год назад +1

    How about the rest of similar Capacitors? There are 9 of them on main board. Would you recommend changing them or they are not at risk ?

  • @AstroDude500
    @AstroDude500 2 года назад

    C8 has blown on mine also.

  • @mcsew2k
    @mcsew2k 2 года назад +1

    This cap should be replaced before it catches fire.