Raspberry pi 3.5 inch LCD screen | review| setup| installation driver
HTML-код
- Опубликовано: 10 сен 2024
- It is a tutorial video to set up & install the driver for the Raspberry pi 3.5-inch touch screen LCD module.
it is a very easy method for beginner raspberry pi users.
You can buy this 3.5-inch LCD module from here -
www.sunsky-onl...
----------------------------------------------------------------------------------------
This product is sponsored by sunsky-online.com
----------------------------------------------------------------------------------------
More details & download rpi lcd text file - goo.gl/3r7tCU
********************************************************************
Please subscribe my channel to support me
- goo.gl/ChgNrn
Like my facebook page - / trv85
********************************************************************
5min and my LCD was up and running - Thank you! (I just uploaded your text file to G-Drive to get it to the Pi, worked as well)
Could you for example play RUclips videos on the LCD screen?
@@Keircomb181 it can do whatever a screen can do
@@wipalo.the.artist so would it be possible for someone to explain to a novice when you buy one of these : how it gets charged, & how it could be configured ? Thanks
@@Keircomb181 I don't think we're talking about the same things... This is about hooking up a touchscreen to a raspberry Pi
@@wipalo.the.artist ok I’m building a sort of model of a pub & would like to have a small screen projecting some videos from RUclips, 2-3 inches long. What would be the best way please ? Thank you.
Hi there,
You sir are a legend.
I can not believe how many videos, downloaded instructions etc i have gone through to try to get this 3.5" touch display to work on my Raspberry Pi 3B.
I finally found your video.
I noticed some of the command prompts and thought , mmmm here we go again.
Well i aploagise because, your very simple and to the point video worked straight away.
I thank you so very much.
Your brilliant.
I shall be using your channel from now on, no need to go anywhere else.
Thanks again.
Kind Regards
Dave.
I've struggled on my own for hours and you just saved me in minutes. Thank you for the great video.
worked just fine on raspberry pi 3 B. Thanks a lot for the video, dude!!!
My Grandpa got me this for christmas. very simple And useful video.
RegularlyDumb same haha but mine dosent work somewhy
He got you the video. Nice pa
thanks info. i just got my kit today thank
hey, I also want to use ultrasonic sensor for my project, is it possible to use it with the display?
Hi, the touch function with the pen its not working
Thanks friend.
This is best vídeo about LCD drivers installation.
Thanks for the demo/tutorial. Very helpful. I liked the music, too. :)
hello i'm interested in something but i don't understand it. should i have raspberian installed for retro pie
Does that screen works with android on pi 4?
Thanks a lot man, you really did help with the LCD
Does this work for raspberry pi zero 2w???
I got a pi 3b with a ups hat and a 3.5 inch screen and its gonna run android is the process the same? Use the terminal in raspian? Im new to this stuff
my LCD was running as i pluged it on the rasp but the touch isnt working....how to fix?
Saludos. Necesitamos configurar la pantalla LCD 320x480 y no lo logramos .... De que forma podría ayudarnos ? Tenemos los driver y no funciona aun así. Help
Is there any way to program it for everytime I connect the HDMI, the lcd turns off and the image is sent to the monitor or tv, and when I pull it off, the lcd gets back to work? Btw... I'm not using a Raspberry pi, but a Orange pi PC, hope it works the same.
Bro, you are a God. Thank you. So much.
i have a screen like yours and a raspberry pi 4 model b ram 4 , and its not working for me i have tried everything -_-
I did this but the screen went all white, but touch still works?
Oof it literally turn my HDMI monitor in the 3.5 inch screen resolution, But my 3.5 inch screen still blank rip.
How to do you turn the LCD back again though lol
It's work with rpi 4 b model?
"need to update touch configuration]" what does that mean!! dpkg frontend lock is locked by another process
helpppppp
I have 1.44" lcd hat, will that git code work with that too?
do we need do use balena etcher to save file in sd card?
Followed your steps I'm getting picture but only getting the retropie command prompt emulation station still appearing on TV screen
Like I plug it in nothing but white screen pop up on the raspberry pi
Thx for the amazing video
Just wanted to know of it will work on the pi 4
Ayuda a!!! Help!! Necesito ayuda hice todos los pasos que indica y no cambia de hdmi a lcd
Can it use in micro bit ?
Does it work on RPi 4? I tried to make it but didn't work. I only got a blank screen. Just in case do you know how to set it on RPi4?
tried everything and never worked with my rpi4 model b
4:36 can you adjust the resolution on this lcd screen? most apps and settings cannot be apply/view when the window is larger than the screen.
yes.... resolution can be adjusted
@@technoreview85 Yes... but how?
mines stops on " [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket."
Me either !!
same here
Can we remove the Android display and put it in the Raspberry Pi
will this screen also work on arm windows 10?
Thanks for the video.
Can we use this screen as a continuous changing display?If yes.how?
how about on raspberry pi 4?
I have a question. Could I power this if I used like a portable battery pack of some sort or whatever?
Yes...you can use power bank
How many mAh does it have to be. Or what's the max voltage I can put to it?
Any power bank which has 2 amp out put
Does it work on Raspberry Pi 4 version??
after install driver lcd is same white
showing ( Started Tell plymouth to writh out runtime data....
started update utmp about system boot/shurtdown........)
plz hlp
Only rasbian os or can i install android
Hey how do you do it how do you get to the screen
This is a great masterpiece. I bought it too. Cheap places are amazing.fave fun anyway!!
Plz tell how to add microphone and speakers to it
You can use usb audio card or usb mic & built in 3.5 mm sound out
it's not working , and i cant use my monitor it's only the coding to start
Can we use the monitor after installing drivers on LCD ????(pls answer)
No you can't use together but after use second code you can use hdmi then lcd will Stop
I use the raspberry pi inspection camera for my colonoscopy clinic
LCD still show a white light, and now neither my hdmi ports work. Can't do anything now.
Even I'm facing the same issue. How did you correct it?
Please help me out!
Useful video
Thank you friend
In case 5e link isnt working the code is:
sudo rm -rf LCD-show
git clone github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show
That did not work for me. It just freezes up the computer at the Rainbow screen. Does the same thing on older and newer versions of updated Raspian----don't do this.
Can you make other video and show how it works on android please
Worked with me but touchscreen not working....
The music reminds me of the Country Bear Jamboree
Is the pi connected to display via hdmi as well??
No it is not a hdmi display. Working with gpio pins
Will this work with rasp 2
I tried this and it did not work on a pi 2
yes it works
@@nunocosta1060 i have tries with many installations but not working!!! please help now .
@@vermalife85 What is your screen version? my was (broke the screen) Kedei version 5.0 from 2016/03/01 (if is the same i can send you the drivers)
Do you know how to rotate the display?
Is necesary to do this all time you plug it or only once?
Only once....
The display works with finger touch?
yes....
i can use ILI9486 320X480
This is not a low cost monitor as it should be.
You can also adjust the resolution to match the screen size. Otherwise excellent video!
just bought my first kit and really would like to know how to change the resolution to fit the 3.5"screen
@@balloonaticsdelft2763 Do everything he shows in the video. Then just go to the display settings and choose the right resolution so it would fit the screen
@@MarksTravelAdventures, for some reason it will only let me set 640 while box says 320
(feel like i lived in a cave :-P )
Joss Gandos broh
Does it work on retropie
No, I would buy an hdmi screen
Who is experi low frame rate?
That is a matter of the LCD you bought
Anyone knows the framerate of this lcd?
Its frame rate is low. Workable but not enough for gaming
@@technoreview85 gotcha. I was looking to play ps2 thru HDMI. Do you think it can handle the console?
Can this be installed with android
VEL MURUGAN Yes there is an Android Version for Raspberry pi
the screen works but the pen doesnt
Screen dies after 5mins then have to reformat my SD since the displays are switched. Not worth the risk.
Same here its just showing me a screen white
for windows iot
Bro can you make one for me iwill pay you
BOOT LOOP MY RPI3
2018-06-27-raspbian-stretch
Tontec 3.2 inch LCD for RPI b/b+
83216z_p64_29
why I can find a working tutorial!
My turn to struggle next
Don't try to use this for gaming, way too slow over the SPI bus.
screen is very laggy.
Doesnt work
Done on Ubuntu mate
8th
can Its work for rpi zero ?