Nice unit! Is it possible to use it with VESC? People starting to use VESC on e-bikes and display like this would be fantastic to have. Can it be used with torque sensor and/or cruise control switch? Thanks
Hi guys! Great idea for bafang display! I'm pumping stock controllers for off-road use, looking for an alternative to the standard display. Will there be voltage support 18s 74v? I increase the maximum current by adding a calibrated resistor to the shunt. If you make a correction factor in the settings, your device will be able to display the correct current and other data.
Hey dude. Great channel and great overview of the egg rider. One question…. Would you have a link to optimal settings for egg rider v2 and bafang mid drive 500w motor 37v battery? Thanks in advance! Matt
Just ordered my EggRider, I'm exited for the profile switching one can do since I want to ride slowly in the city and faster on the country roads or forests.
what that mean e21 on the egg rider screen ? have the same with my egg rider and still not understand .... A and W have a bug too is not regular and just see few ms ....
Not a very good tutorial video. You need to have a basic step-step video, starting with registration and firmware installation. I'm over 3 hours in trying to install mine- Starting with the firmware upgrade and having to download outside apps. It's a really cool product, but not plug and play by any means. It's important to have someone who isn't an engineer explain all this in layman's terms. Future videos should be less free form and more organized in presentation. Anyone who isn't tech savvy probably won't be able to use this product.
I notice there is NO TORQUE TAB so I assume you can not use this on the Ultra for programming the controller Torque settings. I am sure the display works just fine with the Ultra but I want to program all settings on the Ultra so I want the TORQUE TAB.
Not very informative for the beginner. It assumes a lot of previous knowledge. The presenter's accent is too heavy to understand and he says "uh-uh-uh" constantly.
finally! :D i'm having problem setting up throttle (road=27kph and offroad=40kph) but when i saved it only 1 setting is actually saved either road=27kph or offroad=40kph :(
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I got nothing at all from this video.
Clear as mud....
Nice unit!
Is it possible to use it with VESC?
People starting to use VESC on e-bikes and display like this would be fantastic to have.
Can it be used with torque sensor and/or cruise control switch?
Thanks
Nice! How accurate are the readings with a 52v pack? ...I mostly just need accurate ride stats for range testing etc.
Hi guys! Great idea for bafang display! I'm pumping stock controllers for off-road use, looking for an alternative to the standard display. Will there be voltage support 18s 74v? I increase the maximum current by adding a calibrated resistor to the shunt. If you make a correction factor in the settings, your device will be able to display the correct current and other data.
Once I turn on my bike the eggrider says locked how can I unlock without the phone app?
Ich hab das eggrider v2 gekauft Handbuch schwerverständlich in Film leider wieder auf englisch??
Hey dude. Great channel and great overview of the egg rider.
One question…. Would you have a link to optimal settings for egg rider v2 and bafang mid drive 500w motor 37v battery?
Thanks in advance!
Matt
Just ordered my EggRider, I'm exited for the profile switching one can do since I want to ride slowly in the city and faster on the country roads or forests.
Can you turn off pedal assist? Is this better than the Luna black box programmer? How much is this?
Vote for Pedro
what that mean e21 on the egg rider screen ?
have the same with my egg rider and still not understand .... A and W have a bug too is not regular and just see few ms ....
Mine goes from 250 watt to 1500 Watts with 1% change of power settings. Any idea how to fix?
Can your EggRider V2 program a Nireeka Prime bafang mid-drive motor?
at Bafang Basic Setting . If i have 20% Assist Limit Current(%). does it mean i have 20% Power of engine . Thanks for Answer . And thanks for Video
Just installed BaFang with egg rider.. something funny... it starts ok.. then even throttle at full..it dies off... any idea???
Hello. Is this product open source?
Can you change total distance kilometers ?
Greetings from Germany
Looks a great product but a really poor tutorial. Flicking about from one screen to the next and back without explaining what he is doing or why
and mumbling. I want to like this product but they don't make it easy for me to like it :\
Ain't that true? Clear as mud to me.......🤣
Work with bafang ultra ?
Not a very good tutorial video. You need to have a basic step-step video, starting with registration and firmware installation. I'm over 3 hours in trying to install mine- Starting with the firmware upgrade and having to download outside apps. It's a really cool product, but not plug and play by any means. It's important to have someone who isn't an engineer explain all this in layman's terms. Future videos should be less free form and more organized in presentation. Anyone who isn't tech savvy probably won't be able to use this product.
@@EggRiderDisplay have you made the new video?
@@tonyholmes9024 Maybe they would be less busy answering all the questions, if they took time to make the simpler video lol
how do you turn on the headlight?
I notice there is NO TORQUE TAB so I assume you can not use this on the Ultra for programming the controller Torque settings.
I am sure the display works just fine with the Ultra but I want to program all settings on the Ultra so I want the TORQUE TAB.
The video is very poorly to understand, voice is badly to understand
i understand everything just clear your damn ears.
Not very informative for the beginner. It assumes a lot of previous knowledge. The presenter's accent is too heavy to understand and he says "uh-uh-uh" constantly.
finally! :D i'm having problem setting up throttle (road=27kph and offroad=40kph) but when i saved it only 1 setting is actually saved either road=27kph or offroad=40kph :(
Don't understand most of it apart from "uh, aha, so see, let's do, yeah!"
Not helpful
poor „tutorial“
what he's trying to say, shame, great product....really bad voice please drink some water sounds so dry and crackley lol
Because English is not his 1st language sounds like he is German by the way he speaks English..