So, I went to Amazon to look at "White Ox Gloves" to wear while trimming my Bougainvilleas. Now, my Amazon recommendations include: a Burke Bar, a 14oz Titanium framing hammer, a Skil Saw and a carpenters' tool belt...
As someone who never had a dad. This channel is one of the few places on youtube where I can learn about things like this with someone who is honest in their opinions and experiences. You've helped me decide what is best for me for jeans, gloves, hammers, how I carry myself in certain situations & places. Ways to be a good man in certain situations. Thanks.
My Voc-Tec Tool and Die teacher in high school had a special knack for story telling. Every Thursday we'd sit the entire class and he's tell us stories. Kids would skip some days, but NOT Thursdays. Even the wise guys were calm and listened intently. To every word. He was THAT good! I've never met someone so interesting and easy to listen to..........till now. He talked about Machine Tools, Farming, WWII, The Auto Industry, even a little about women and booze. That would have been about 1976. I remember those days fondly, and I miss them and the stories. Your style reminds me of him. Great content, GREAT channel.
exactly same with my math teacher on secondary grammar school in Slovakia.We had math every day,he told us in september if we focus on math 4 times a week without a single interruption,he reserve one day a week for easy talking and stories,it was thursday. He talked about everything,even political opinions,jokes,gave us good ideas for life.Very good teacher,everybody loved him.
I tried these gloves on your recommendation and they're fantastic! Seemed to me cotton wouldn't be up to the task of protecting from punctures but was I ever wrong. Spent hours pulling and handling carpet today. Staples and spike strips everywhere. Nothing ever made it through the gloves. Thank you for the recommendation sir and keep up the great videos!
I never thought I'd spend 6 minutes watching a youtube video on something as mundane as work gloves. I've been inhaling your content as much as I can since I discovered your channel... absolutely brilliant. Appreciate your fervor for hard (but efficient!) work, good tools, and your obvious delight at sharing this information with the rest of us.
I served in the Navy on an oiler refueling other ships in Vietnam while underway back on the '60s, and we had plenty of winches with wire cable on them. When the wire started wearing out and the individual strands of wire broke, like you showed on the choker, we called those "fish hooks" in the Navy. They were always there waiting to stab your hand good and deep, or rip your hand open. Replacing the wire on the winches was not a job that anyone looked forward to, but it was a necessary evil that went along with serving on a ship in the Navy. It would have been nice to have these gloves (or ANY gloves) way back then! Thanks for the lesson on gloves from someone who's been there and done that!!
Love your testimonial. It's great to get an honest appraisal of a product without it being bought and paid for. Your comments are like what you get from Consumer Reports. Just an honest appraisal of a product and you are showing your care for your viewers safety with your knowledge. Thanks. Have a blessed day.
Those gloves are like the old school cotton gloves i wore working in the oilfields of West Texas....they come in varying ounces also....now we all wear impact gloves....they both get the job done so its just a matter of preference....nice video....
I love watching your videos. Imparting knowledge freely to anyone who would like to learn. I feel like I'm your apprentice, just sucking up hints and tips about so many things. My late father was just like you, having had so much knowledge, and being ready and willing to just teach me so much. Thank you so so much.
Can't beat White Ox. I wear the cuff style. Been a Iron Worker for 34 years. Structural iron worker, alot of heavy rigging and welding as well. These gloves hold up true and strong and once broke in Hell they take even more of a beating 100% recommend white Ox gloves.
Worked in the bush in BC years ago, logging. The company started out buying any kind of gloves you asked for but in short order went to only White Ox. Nobody complained because it's what we all wanted anyway. Right on all points, good in all weather, lasted longer than anything else we tried and took a couple of days to work in but worth that little bit of effort.
I'm on my 3rd pair and love them for working around the cabin with chainsaw and everything from sticks to small logs. I've also used them around yard here at home in dealing with roses and other sticker type plants and they're absolutely great. Thanks for the tip Scott. Love the channel and all you're skills that I'm adapting to my needs. Keep up the good work, and give Nate a thumbs up too.
How in the hell has he not been approached by sponsors?! I've watched three hours of his content (and counting) just today itself. Thank you for the knowledge you put out there.
When i first started logging in the Grant's Pants area in the early 70s, i wore "double" Rose, canvas gloves. Same as Ox gloves, but with a double layered palm. All the gyppos wore them, especially us soker chetters. Are they still around? 🐴
I've lived in the Pacific northwest for most of my life and have bought White Ox gloves for most of my working career. Logging, construction and machinery maintenance have all been done with them. They are the best all around working gloves I've ever come across.
In the oil and gas industry, we have a very similar and ubiquitous glove not unlike these. Usually come in white, green, and orange. They have all the same characteristics, and pros and cons. Gave a 12 pair pack to both my father in law and father, and they both beg me to buy more every time I see them. You just can’t beat the feeling of a good cotton glove
It's incredible how hard it is to find good gloves. When I was in construction, I spent so much money trying to find a pair that would last. The handle on shovels would tear through most of them inside a month. Sometimes inside a week! I tried cheap and expensive and it seemed the expensive ones were the worst. It was almost always in the seams. The palm, thumb or fore finger. I ended up buying a 5 pack of those thick gardening gloves you see everywhere and they actually worked the best. Now that I'm driving again, I need the sensitivity in my fingers for strapping down loads, using keys and locks etc. and I've found the Wells Lamont leather gloves to work great for that. I can get 4 months or so use out of them which isn't bad for the $10 I pay for them.
The point you made on being able to get out of the glove. My uncle was a metal fabricator. Worked for a company that made grain tanks. He was wearing a leather glove. His hand got caught up on a burr. Feeding into a slip roller. It squashed his fingers to the second knuckle before he could hitthe safety switch. I'm getting me some white ox. I love not only your level of craftsmanship, but your philosophy on work. That's the ethic most could learn from. Me included. Thanks.
Thank you for your hard work in this life and for sharing your insights with those who chose to follow the path of hard, fruitful, and satisfying work. Your channel over the years has helped me become the craftsman I’ve wanted to be. God Bless you and your family and every one else with a good work ethic.
FYI, after building a few dozen houses, often with wet lumber, I started using mechanics gloves because they didn’t wick as much water, offered better grip when wet, and I could still grab nails out of my tool belt. Good video, keep them coming, my young sons are glued to your videos.
The internet continues to impress me! I have been building a small firewood business since October. Gloves seems to be a necessary evil while working with firewood, chainsaws, axes, cables, ropes, etc. I wore Atlas insulated gloves which are fine when new but wear out quickly, maybe one day!! So frustrating. I went down the rabbit hole and fell into the leather glove trap! $100 later I am still frustrated!! Then, like magic I find this video, Ha!! They aren’t available on our little remote island in Alaska but USPS will send them across the skies! Thanks EC
Where I am work gloves have to have the ratings for abrasion, tear, impact, puncture, heat, fire and theres a few more printed on the glove. Goes from 1-5 and all of the valid kite marks will be on the glove. I have numerous different gloves for different purposes and a winter version of each. My general purpose go to is a 5* cut 3* abrasion 3* impact kevlar partial nitrile glove.
As a Saw Filer I used White Ox my whole career. You couldn't use any type of leather as it was too slippery and if you had a puncture through the leather you get cut BAD. You could feel the teeth coming through the White Ox before they cut you. I, and my co-workers tried many different types of cotton gloves. We had to buy them (through work) and we tried to save money on the cheap ones. Most of the cheap gloves would get a hole in them within hours or the thumb seam would give out. We always ended up going back to the White Ox. Their seams held for the most part and they are double layered on the working side. I would go through a pair of White Ox in a week to a week and a half, benching round saws. Believe me I didn't want to spend that much money on gloves, but you got your moneys worth with White Ox.
I found your channel maybe a month or so now. Your content is so engaging and so varied back. Greatly appreciate all the valuable information you share. Anna is such a variety of subjects.
I've never found that perfect pair of gloves....I think I've tried them all....except these. I'll try them after seeing this. A side Note: In the 1970's decade brick masons were in great demand. As a contractor I couldn't wait on them, so I laid my on brick veneer. I found that a brown jersey glove would last for one house (6- 10 days) if you placed surgical tape on the finger tips while they were still new.... worked awesome for the handling/laying brick! ....13
Worked in the woods 40 years,White Ox are far and away the best.Seen a few green horns use leather,They learn quick after they cut their gloves,and hands handling cables.
I've been using mechanix gloves for everything for years now I really like the fast on kind because I can take them off one handed by getting the loop stuck on something and pulling off.
I found this channel a few weeks ago while looking for a video about I can't even remember what, and it's quickly become one of my favorites. I've been slowly working my way through all the videos and I've finally figured out who Scott reminds me of...Paul Harvey. I grew up tinkering with my dad around the house while listening to Paul Harvey on the radio and Scott has the same kind of no-nonsense, salt of the earth wisdom that Paul Harvey used to offer his radio listeners but which seems to have all but vanished from our modern world. Really good stuff.
I bought a pair of these, even though I don't need new gloves yet. Never occurred to me to use cotton gloves for work, though I know some loggers have for many years. Only time will tell if they will work for me (just got them today). I will say though, that as far as price goes, my leather gloves cost less. $20 for a 3 pack at Costco, and the gloves work great and last pretty long. My new cotton ones cost $14 shipped for one pair, and if I end up buying them in bulk, they will come out to about the same as my leather ones. Doesn't seem as cost effective since one os cotton and the other is leather, but if they work better, then I'm happy to spend the money. I always listen to guys like Scott, and and usually happy I did. Save me a lot of time, rather trying to learn things the hard way.
Its unfortunate - the white ox gloves don't seem to have much brick & mortar store presence (in the south at least) and so sourcing these gloves for me is also looking like $20+/pair unless buying bulk. Too bad they don't have distribution through tractor supply or something.
Hey, White Ox glove company. Here is a guy who knows what he is talking about promoting your product. And, I will buy your gloves because I believe he knows what he is talking about. It wouldn't hurt you to keep this man supplied in gloves, and maybe a little sponsorship money because the honest marketing he is giving you is worth it. Going to buy some right now.
I'm 58 years old and have always used gloves designed for the task at hand; leather for fencing, lumber work, shovels, metalwork, axes etc., Specialized mechanics gloves for wrenching, rubber gloves for chemicals, welding gloves for uh welding. After watching this video I purchased a pair of White Ox gloves that I found for $2.99 at the local discount store. They worked great for picking up sticks and handling brush but after a couple of hours of chainsaw work my hands were numb. I had severe cramping. These gloves provided no vibration protection. Nice gloves but they are not the multi-purpose only glove you'll ever need. I will go back to using my padded leather palm rip resistant gloves for chainsaw work.
Anthony Valadez I wear West Chester leather gloves. I’ve worn them for 6 years to do all sorts of work. I’m on my 2nd pair in 6 years only because I threw the first pair away after handling a dead rat. I buy my gloves at my local Tractor Supply. I’ve never tried White Ox cotton gloves. Can’t get them locally.
I mean this in the most respectful way. You look like you are in great shape for a man of your age. I like that these are made in the US and you seem to know what the word work really means to those of us who can actually put gloves to the test. It is hard to find a balance in longevity, affordability, dexterity, and protection. But you seem to have found a great contender for that spot. For these reasons I decided I will buy 2 pair and see what they can do for me in my line of work. I also decided I will subscribe to you for your admirable knowledge and honesty.
@@clayfullmer they do get softer as you wear them. I think they are comfortable to wear. But my hands are already roughed up. I wear them so I don't lose skin off my hands lol.
My father was a high rigging Forman in the Boilermakers union. He always wore White Ox. Fast forward 50 years later I am wearing the same brand. Probably have 5 pair in the shop right now. Usually hit them with a torch for a sec when they're new. I have all sorts of gloves but I always come back to them.
A recommendation and a testimonial to back it up with from a Craftsman. Essential information for those that appreciate your knowledge and experience. : )
So how come white ox north star 1014 gloves aren't available at any of my Iowa stores? Is it a regional thing? All we have are those yellow fleece chore gloves..
This is the first time I've heard gloves wearing out faster described as an advantage. "You get to wear new gloves more often." Well, yes, I suppose so.
I have used these gloves many times and just bought 3 more pairs on ebay for about $30.00 with shipping. Just about every pair I've had has torn on the middle finger. And this is just for home use; cutting branches, digging holes, carrying rocks. They are good for wet places/climates but I wouldn't call them durable. I'll start using tear mender or carpet seam glue as an ironworker suggested to make them last longer.
That’s a double ply quilted palm equating to construction from canvas of 22 ounce thickness. And don’t forget the reconfigured index finger seam gives same protection as wrap around construction.
This is indeed an excellent wearing model. I'd recommend their model, same palm design, with gauntlet cuffs. Those are great when doing work that can expose the palm side of your wrists to splinters or cuts. Furthermore, if you have sun sensitive hands, these gloves keep you skin from barbecuing on the steering wheel.
I agree with almost everything you talked about, my only qualm is mostly particular to me, I have large hands, most XXL sized gloves barely fit. I like leather gloves because they seem to break in easier than most. My hands used to ache for days after buying new rubberized, or canvas style gloves. They were stiff as a board and squeezed my hands with a kung fu death grip. My work doesn't require quite the level of protection as you described but I can appreciate the need for quality heavy duty gloves. Always enjoy your videos!
i work in sales. I'm 31. I think I'm missing something. There's a desire to build in me, to get my hands dirty, and to use my body. For some funny reason I looked down on the trades when I was in high school. With retrospection I didn't see myself as a tough enough guy to put up the work, Now I see differently. It's never too late but the switch might be hard. I have signed up for a woodworking class at a maker labs studio. It's not trades training but at least I'm reaching. Love your channel. You speak simple wisdom that is becoming far too rare in this gigabyte gigagulp world.
You know, I know a guy who became a Crane Operator at 35 after apprenticing for a couple years. What I'm saying in all that is, it's never too late to pick up a new skill or trade. Many of the trades pay quite well too
@@colinfiggins3372 "The road to Hell is paved in best intentions." Look... I don't know your family or friends. Most of us, most of the time, honestly want the best for our closest people. We just don't always know what that "best" is... so I'm not going to tell you to dismiss what your family tells you... or the friends who might know you more than you think you know yourself. Just be careful about all the advice and direction. There's a little bit of personal internal bias that everybody puts into their "best advice". You need to understand (of course) that you're talking about making a change for yourself. It's not easy. Carpentry and fabricating isn't easy. Engineering (and yes, it IS some engineering) isn't easy. The money's often slow, clients are squirrelly... and some are downright dishonest. The trades are FULL to overflowing with slackers who could've gotten a PhD out of high-school, could've been a contender, but would rather take an "easy route" to something they can do high... It's full of drugs and addicts, too... like the rest of the world. I'd be remiss to paint you a "pretty picture" of rosy scenery and not include the distractions, disruptive and toxic people... etc... If you have a career... it's okay to work that a while. Take this "change" on in smaller bites. EVERYTHING in life is a series of steps. You can make those big obnoxious and ambitious back-breaking, mind-warping steps... OR you can cut them down to manageable, simple, little steps. Make it a hobby, to get your feet wet. Let the career (even that you hate it kinda) pay for some of your start-up... the hammers, drill, circle saw, squares, marking outfits... and practice some application. Let a guy "from the industry" know you're working on something, and take friendly advice, try to understand WHY he thinks it's supposed to be done a certain way. As you gain a bit of confidence, because... well... let's face it. This stuff ain't rocket science. There's engineering involved, but that's just knowing the math... doing the hard stuff. The rules don't change... As you get better, you can start making this hobby pay for itself... not just for Christmas presents that shorten the shopping for family and friends that wouldn't say "sh*t" to you if they had a mouthful. Take a few odd-jobs. Help the neighbor down the street renovate (or completely rebuild) his shed. Set up a swingset for someone a few blocks out... Maybe you make a few bucks (feels like recovering from the tools) and maybe you just get your lawn mowed or an evening of lemonade (hard preferably) and a sunset watch from an old backyard swing... (don't forget to look for termite damage so you have another excuse to do something)... AND when the opportunity comes, someone will point you out to a local contractor... ADMIT you're just starting out... a "frustrated amateur who wants to learn"... and be ready to step up. The right answer is never "oh hell no"... not in any form or fashion. The Right answer is, "I might not just yet, but I'll figure it out... Any tips?" Finally, pop over to Lowe's, Home Depot, Harbor Freight, anywhere "hardware" usually... AND buy a "Pocket Ref"... You can't beat the shear mass of information in that little black book! It's got everything from mining-milling aggregate standards and jeweller's technical specifications for Diamond classes or geological terms and chemistry for ore... to drill bit sizes versus wire gauge, the resistance of single strand or multi-strand core wire and cable, copper OR aluminum... You can still look up the Semaphore Alphabet used by signalmen (with flags) in the Navy and Morse Code... It costs around ten or fifteen bucks (depending on what store) and the current one is "Fourth Edition"... They are worth collecting, since editions DO change information. Some gets dropped for obsolete or just to make space, while new stuff gets added... but it's GREAT for a start on just about any question you can possibly think to research. AND... best of luck, no matter which way you lean or decide. The only true freedom any of us really has is the ability to make our own way... our own decisions in life. Enjoy it. ;o)
Showa Atlas 370 Flat Nitrile Coated Gloves are by far my favorite glove. Working concrete no other gloves compare in a balance of sensitivity, warmth, durability, and protection.
I have found The gloves made for Milwaukee tools has done very well compared to other brands I have worn over the years. Pricey Yes , durability very good. I have never heard of White Oxford gloves until today, I will check them out, thank you!
Thank you for your advice and expertise. I'm looking into an apprenticeship in carpentry, now I know what type of work gloves are the best buy. And if not literally the #1 best close enough then.
I carry a lot of cinder block and abrasion is a problem. My current Wells Lamont leather gloves last a few weeks before the fingers abrade through. I'm gonna give White Ox a try. Thanks, very valuable video!
I went and bought a pair after seeing this video. After two days of use, they are showing wear parts. they also shrunk after getting wet. I have short fingers and my fingers are pushing the tips of the gloves. Developing holes in a couple of fingertips. 12 bucks a pair at a local store.
Very informative, thank you sir! It's so neat to hear all the particulars when you review anything, because of your wealth of experience. Right now, I'm at the stage where I'm young, strong, and dumb, and I only ever wear gloves when I'm welding or doing rough work in the cold. At some point I'll wisen up and wear gloves to protect from all these little cuts I always get. My wife would appreciate that...
I'm a big fan of Atlas Therma Fits. Cotton/Poly blend with grippy palm. Great for wet, frozen manual labor. They dry quickly and make lifting easy. Maybe not the best for welding but work in a pinch. My brother wore them when we went up Denali. I'd consider it.
I'll give them a try. I like a thinner glove for finer work, definitely, but these look great for demolishing a tile shower surround, or stacking firewood. I hope they send you a case or two because you're going to sell a few pairs.
While they aren't suitable for some of the heavier work you were describing or any thing that will melt them, I highly recommend *Atlas* mesh and nitrile gloves... the black ones with the grey pads. The advantage they have is high feel and dexterity. They fit skin tight and offer a fair amount of protection from cuts, pokes and abrasion (great for wet work, shingling, digging, moving brush, wood, etc..)... anything that would give you a blister. There are *many* knock offs, but they don't compare favorably with the *Atlas* brand and they are machine washable. Really nice if you have smaller hands (like myself) and find most manly brands of gloves are baggy around the fingers.
You need to create an online store. Your advice is worth getting something for sale. I'm ordering these gloves. And I agree you can do videos on all sorts of things including more on your vehicles. Thanks for sharing your knowledge.
i bought some of these gloves after seeing this video. i find that they are my favourite but they don't last as long as i hoped with rebar and formwork.
Good too know. I'm a union rodbuster that spends way to much money on gloves. I found it's best to just buy cheap cowhide gloves. No matter the material or expense, one day is about all I get out of them.
Luis Crespo Wrangler star just talks to hear his own head rattle. If one of his videos is 20 min, it's a safe bet that the same exact info could've been conveyed in a 10 min video (if not less). I can't remember the last time I watched one of his videos.
that_G_EvanP i’m a wildland firefighter and I only wear custom boots cause I know that they will last me many years and he knows what he is talking about cause he lives it this guy is paid to talk about crap that he doesn’t know what he is talking about
DJ Gibreheim You're entitled to your opinion but I'll take Essential Craftsman over Wranglerstar any day of the week. Not saying Wranglerstar doesn't have a good channel, I'm just stating my opinion. P.S. I'm pretty sure Scott knows what he's talking about.
I watched this video and bought a pair of White Ox gloves. First day on a new job the guys saw my gloves and asked me if I wanted a pair of the rubbery nitrile gloves - you know, the kind that make your fingers sweat and stink. I looked them calmly in the eye and said no. Mind you, I've worn that kind of glove plenty in the past as a heavy equipment operator and ditch digger. These gloves are have a long way to go from being perfectly broke in, but already after only a couple of days worth of use they are starting to conform to my hands, and I haven't had a single wood splinter or metal shaving poke threw them when I've been wearing them over the past two weeks. Thanks for the glove recommendation!
These aren't bad gloves. I also use Milwaukee goat skin gloves and those are thin enough for great dexterity, but still offer decent protection. And they're only $10. I bought a few to have on hand to replace once a year and have even given them away to friends.
Good video and promotion of the product, being in construction and renovations for over 30 years gloves are important. Proper gloves for the work at hand are even more important.
I've been using these gloves while working at big box hardware store pulling whole deck orders by my lonesome and theses glove have saved my hands so many times, my only problem is that the work I'm doing they come apart in the thumb/palm seam but by then the fingertips are worn through. Thank you for the recommendation
I just joined the ironworkers union here in Seattle. Never done any construction. Our superintendent buys white ox gloves and they're great. But they're the gauntlet type glove. So they kind of slide off the hands (I'm a little guy) but I think the elastic cuff would be perfect. No slag in my gloves either.
I prefer leather. But in winter I use Tom Cats, yellow "matted" cotton, maybe a little thicker. I found that ShooGoo on the palms and fingers makes them slightly water proof, little better grip, and miles more wear. Around my area we have TearMender, its liquid latex good for sticking patches on denim bibs, but also good for coating gloves. ShooGoo by the way is basically silicon caulk.
Just ordered some of these gloves by your recommendation. I want to see for myself if these gloves are as good as what saw in your video. I plan to wash and dry these in the laundry before using to see if they pre-shrink fit without the natural work shrinking time required. I like to live dangerously.
Can't compare tough cowhide to human skin. Cowhide leather is less vascularized, has far fewer glands in a given area, is designed to support a much thicker hair covering. All characteristics evolved for hard conditions. Good leather gloves will break-in like a second skin and as far as care? Put them on, wash with mild soap like you would your bare hands, towel dry, grab some mink oil or Obenauf's, and rub it in like you would using O'Keefes's.
Working in a steel mill doing maintenance I use cotton. Beat the pants off of leather when oily and greasy, just fine for welding, more shock absorbtion and insulation from heat and cold, quick on and off, and cheap enough that you don't worry about wrecking a pair. The biggest downside is the grip out of the pack. They break in pretty well though. Now, when I was rolling steel bars and grinding, painting, and stamping them by hand, soft leather palm with a breathable canvas back was the winner. Got about 18-20 working days before the right hand would wear out.
@@BlownF150 Your comment reminded me of the day that a candle caught the curtain alight when I was helping a friend with some work in his garden. Rather than rip it down and stomp it in the carpet, I managed to put it out by beating the flames out with my cowhide gloves and then rubbing the smouldering remains out against my Levi's with my gloved hands. My friend was amazed that my gloves survived it and my jeans were fine after a few washes.
They sell some deerskin leather gloves here in my area that are awesome. I've had two pairs in the last 8 years. I've welded, wrenched , built fence, shoved snow and processed deer with the same gloves & they don't wear out plus they're soft and comfortable
I tried them, but they have ZERO grip (running a plastic handled hedge trimmer) and a rose bush thorn had no problem getting thru the palm and finger. I got the #1016.
I'm pretty sure he was talking about the frayed metal wire things that would cut you when you're grabbing that junk. I'm not sure how well that actually works. Though, you should of gotten gardening gloves, they are note suited to thorns
Interesting. Personally I’m partial to a pair of Mechanix Fabricators, but most of the threats to my hands have been sharp metal edges rather than spikes. They fit me great and they haven’t failed me yet, though they did cost a lot more than anything else I wear. I do know they don’t agree with brambles, but then natural spikes are microscopic points and make man-made points look dull. However, tool for the job, and gloves are but a tool. After being happy with the fit (an annoyance that has plagued me in the past), I picked up some Mechanix MPACT2s, and used them for damping vibration and impacts, such as from longsword or cycling. Happy with those too. And now some heavy duty cotton gloves to add to the arsenal? Sure, why not, certainly at that price.
I love all your videos but the short and sweet vids with straight forward info or tips are my favorite. Please consider doing many of them at one sitting and then release them every day or every other day.
There's been a new video every 3 days or so. The last video that was recorded in this session looks to have been 2 weeks ago. Videos like this are best used when there will be a lull in content which is how it appears to he is using them.
Okay, I got the jeans and the gloves. Now what socks, shirt and underwear do you wear so that I can be you this halloween
don't worry I'm sure he'll do a video on suspenders and boots
amazing!!
I've already got the Ford truck...so I'm good there...
Classic !
Don't forget those suspenders. They are Dickies and can be had on Amazon for $12. I don't work without them.
So, I went to Amazon to look at "White Ox Gloves" to wear while trimming my Bougainvilleas. Now, my Amazon recommendations include: a Burke Bar, a 14oz Titanium framing hammer, a Skil Saw and a carpenters' tool belt...
The amazon "other users also considered" artificial intelligence robot secretly watches the EC vlog in its spare time is why...
Jake R what size glove you go for
Jake R
Titanium? Posh.
Same lol the Burke bar suggestion was kinda creepy
@@baron8107 the stilleto are nice but they are so expensive would like one though
As someone who never had a dad. This channel is one of the few places on youtube where I can learn about things like this with someone who is honest in their opinions and experiences.
You've helped me decide what is best for me for jeans, gloves, hammers, how I carry myself in certain situations & places. Ways to be a good man in certain situations. Thanks.
Thank you for a good comment.
My Voc-Tec Tool and Die teacher in high school had a special knack for story telling.
Every Thursday we'd sit the entire class and he's tell us stories. Kids would skip some days, but NOT Thursdays. Even the wise guys were calm and listened intently. To every word. He was THAT good! I've never met someone so interesting and easy to listen to..........till now. He talked about Machine Tools, Farming, WWII, The Auto Industry, even a little about women and booze. That would have been about 1976. I remember those days fondly, and I miss them and the stories. Your style reminds me of him.
Great content, GREAT channel.
He would be labelled a ton of inappropriate titles like racist and misogynistic these days unfortunately.
anthony peltier
Racist, misogynistic...male...American. You know. All the “bad” stuff
exactly same with my math teacher on secondary grammar school in Slovakia.We had math every day,he told us in september if we focus on math 4 times a week without a single interruption,he reserve one day a week for easy talking and stories,it was thursday. He talked about everything,even political opinions,jokes,gave us good ideas for life.Very good teacher,everybody loved him.
@@anthonypeltier4039ok boomer
I tried these gloves on your recommendation and they're fantastic! Seemed to me cotton wouldn't be up to the task of protecting from punctures but was I ever wrong. Spent hours pulling and handling carpet today. Staples and spike strips everywhere. Nothing ever made it through the gloves. Thank you for the recommendation sir and keep up the great videos!
I'm a Ironworker and live in tacoma where they are Union made, we add tear mender or carpet seam glue to make em last longer for us rodbusters
492 Nashville here
Iw local 25 here. Thanks for the tip.
Thanks Neighbor. 😊
Joel Campbell-Case also a rodbustwr
But do you use this gloves?
dude these old videos have given a different perspective on videos I can do this winter! thanks
I never thought I'd spend 6 minutes watching a youtube video on something as mundane as work gloves. I've been inhaling your content as much as I can since I discovered your channel... absolutely brilliant. Appreciate your fervor for hard (but efficient!) work, good tools, and your obvious delight at sharing this information with the rest of us.
I served in the Navy on an oiler refueling other ships in Vietnam while underway back on the '60s, and we had plenty of winches with wire cable on them. When the wire started wearing out and the individual strands of wire broke, like you showed on the choker, we called those "fish hooks" in the Navy. They were always there waiting to stab your hand good and deep, or rip your hand open. Replacing the wire on the winches was not a job that anyone looked forward to, but it was a necessary evil that went along with serving on a ship in the Navy. It would have been nice to have these gloves (or ANY gloves) way back then! Thanks for the lesson on gloves from someone who's been there and done that!!
Love your testimonial. It's great to get an honest appraisal of a product without it being bought and paid for. Your comments are like what you get from Consumer Reports. Just an honest appraisal of a product and you are showing your care for your viewers safety with your knowledge. Thanks. Have a blessed day.
If you're working in the woods....the only work i do in the woods is rubbing one out
Those gloves are like the old school cotton gloves i wore working in the oilfields of West Texas....they come in varying ounces also....now we all wear impact gloves....they both get the job done so its just a matter of preference....nice video....
I just love, no LOVE, it when RUclips tells me there is another new EC video....keep them coming
I love watching your videos. Imparting knowledge freely to anyone who would like to learn. I feel like I'm your apprentice, just sucking up hints and tips about so many things. My late father was just like you, having had so much knowledge, and being ready and willing to just teach me so much. Thank you so so much.
Thanks for taking the time to share this.
Can't beat White Ox. I wear the cuff style. Been a Iron Worker for 34 years. Structural iron worker, alot of heavy rigging and welding as well. These gloves hold up true and strong and once broke in Hell they take even more of a beating 100% recommend white Ox gloves.
Worked in the bush in BC years ago, logging. The company started out buying any kind of gloves you asked for but in short order went to only White Ox. Nobody complained because it's what we all wanted anyway. Right on all points, good in all weather, lasted longer than anything else we tried and took a couple of days to work in but worth that little bit of effort.
oh! I should give those a try
I'm on my 3rd pair and love them for working around the cabin with chainsaw and everything from sticks to small logs. I've also used them around yard here at home in dealing with roses and other sticker type plants and they're absolutely great. Thanks for the tip Scott. Love the channel and all you're skills that I'm adapting to my needs. Keep up the good work, and give Nate a thumbs up too.
How in the hell has he not been approached by sponsors?! I've watched three hours of his content (and counting) just today itself. Thank you for the knowledge you put out there.
This man is a national treasure.
When i first started logging in the Grant's Pants area in the early 70s, i wore "double" Rose, canvas gloves. Same as Ox gloves, but with a double layered palm. All the gyppos wore them, especially us soker chetters. Are they still around?
🐴
I've lived in the Pacific northwest for most of my life and have bought White Ox gloves for most of my working career. Logging, construction and machinery maintenance have all been done with them. They are the best all around working gloves I've ever come across.
Where do you buy them?
In the oil and gas industry, we have a very similar and ubiquitous glove not unlike these. Usually come in white, green, and orange. They have all the same characteristics, and pros and cons. Gave a 12 pair pack to both my father in law and father, and they both beg me to buy more every time I see them. You just can’t beat the feeling of a good cotton glove
It's incredible how hard it is to find good gloves. When I was in construction, I spent so much money trying to find a pair that would last. The handle on shovels would tear through most of them inside a month. Sometimes inside a week! I tried cheap and expensive and it seemed the expensive ones were the worst. It was almost always in the seams. The palm, thumb or fore finger. I ended up buying a 5 pack of those thick gardening gloves you see everywhere and they actually worked the best. Now that I'm driving again, I need the sensitivity in my fingers for strapping down loads, using keys and locks etc. and I've found the Wells Lamont leather gloves to work great for that. I can get 4 months or so use out of them which isn't bad for the $10 I pay for them.
Thank you very much. Your production is one of my favorite uses of the internet.
The point you made on being able to get out of the glove. My uncle was a metal fabricator. Worked for a company that made grain tanks. He was wearing a leather glove. His hand got caught up on a burr. Feeding into a slip roller. It squashed his fingers to the second knuckle before he could hitthe safety switch. I'm getting me some white ox. I love not only your level of craftsmanship, but your philosophy on work. That's the ethic most could learn from. Me included. Thanks.
Thank you for your hard work in this life and for sharing your insights with those who chose to follow the path of hard, fruitful, and satisfying work. Your channel over the years has helped me become the craftsman I’ve wanted to be. God Bless you and your family and every one else with a good work ethic.
FYI, after building a few dozen houses, often with wet lumber, I started using mechanics gloves because they didn’t wick as much water, offered better grip when wet, and I could still grab nails out of my tool belt. Good video, keep them coming, my young sons are glued to your videos.
I’m a steelworker here in Oregon, I use leather gloves for on the job, Outside of work when I’m cutting firewood I prefer the white ox
The internet continues to impress me! I have been building a small firewood business since October. Gloves seems to be a necessary evil while working with firewood, chainsaws, axes, cables, ropes, etc. I wore Atlas insulated gloves which are fine when new but wear out quickly, maybe one day!! So frustrating. I went down the rabbit hole and fell into the leather glove trap! $100 later I am still frustrated!! Then, like magic I find this video, Ha!! They aren’t available on our little remote island in Alaska but USPS will send them across the skies! Thanks EC
Where I am work gloves have to have the ratings for abrasion, tear, impact, puncture, heat, fire and theres a few more printed on the glove. Goes from 1-5 and all of the valid kite marks will be on the glove. I have numerous different gloves for different purposes and a winter version of each. My general purpose go to is a 5* cut 3* abrasion 3* impact kevlar partial nitrile glove.
As a Saw Filer I used White Ox my whole career. You couldn't use any type of leather as it was too slippery and if you had a puncture through the leather you get cut BAD. You could feel the teeth coming through the White Ox before they cut you. I, and my co-workers tried many different types of cotton gloves. We had to buy them (through work) and we tried to save money on the cheap ones. Most of the cheap gloves would get a hole in them within hours or the thumb seam would give out. We always ended up going back to the White Ox. Their seams held for the most part and they are double layered on the working side. I would go through a pair of White Ox in a week to a week and a half, benching round saws. Believe me I didn't want to spend that much money on gloves, but you got your moneys worth with White Ox.
I found your channel maybe a month or so now. Your content is so engaging and so varied back. Greatly appreciate all the valuable information you share. Anna is such a variety of subjects.
I've never found that perfect pair of gloves....I think I've tried them all....except these. I'll try them after seeing this.
A side Note:
In the 1970's decade brick masons were in great demand. As a contractor I couldn't wait on them, so I laid my on brick veneer. I found that a brown jersey glove would last for one house (6- 10 days) if you placed surgical tape on the finger tips while they were still new.... worked awesome for the handling/laying brick!
....13
Worked in the woods 40 years,White Ox are far and away the best.Seen a few green horns use leather,They learn quick after they cut their gloves,and hands handling cables.
I just watched a man talk about gloves for six and a half minutes... And enjoyed every second of it! :)
I've been using mechanix gloves for everything for years now I really like the fast on kind because I can take them off one handed by getting the loop stuck on something and pulling off.
I found this channel a few weeks ago while looking for a video about I can't even remember what, and it's quickly become one of my favorites. I've been slowly working my way through all the videos and I've finally figured out who Scott reminds me of...Paul Harvey. I grew up tinkering with my dad around the house while listening to Paul Harvey on the radio and Scott has the same kind of no-nonsense, salt of the earth wisdom that Paul Harvey used to offer his radio listeners but which seems to have all but vanished from our modern world.
Really good stuff.
I bought a pair of these, even though I don't need new gloves yet. Never occurred to me to use cotton gloves for work, though I know some loggers have for many years. Only time will tell if they will work for me (just got them today). I will say though, that as far as price goes, my leather gloves cost less. $20 for a 3 pack at Costco, and the gloves work great and last pretty long. My new cotton ones cost $14 shipped for one pair, and if I end up buying them in bulk, they will come out to about the same as my leather ones. Doesn't seem as cost effective since one os cotton and the other is leather, but if they work better, then I'm happy to spend the money. I always listen to guys like Scott, and and usually happy I did. Save me a lot of time, rather trying to learn things the hard way.
Its unfortunate - the white ox gloves don't seem to have much brick & mortar store presence (in the south at least) and so sourcing these gloves for me is also looking like $20+/pair unless buying bulk. Too bad they don't have distribution through tractor supply or something.
Hey, White Ox glove company.
Here is a guy who knows what he is talking about promoting your product.
And, I will buy your gloves because I believe he knows what he is talking about.
It wouldn't hurt you to keep this man supplied in gloves, and maybe a little sponsorship money because the honest marketing he is giving you is worth it.
Going to buy some right now.
This channel has become my favorite, quite quickly.
I'm 58 years old and have always used gloves designed for the task at hand; leather for fencing, lumber work, shovels, metalwork, axes etc., Specialized mechanics gloves for wrenching, rubber gloves for chemicals, welding gloves for uh welding. After watching this video I purchased a pair of White Ox gloves that I found for $2.99 at the local discount store. They worked great for picking up sticks and handling brush but after a couple of hours of chainsaw work my hands were numb. I had severe cramping. These gloves provided no vibration protection. Nice gloves but they are not the multi-purpose only glove you'll ever need. I will go back to using my padded leather palm rip resistant gloves for chainsaw work.
Greg Brown I also find that I can’t grip tools as well in white ox gloves as I can with leather. They just don’t fight snug enough for my liking.
I wore White Ox for 60 years so far. I spent 6 hours a day for 11 years on a saw. I would never wear any other glove than White Ox.
What brand leather gloves do you recommend. I work maintenance
knotbumper right
Anthony Valadez
I wear West Chester leather gloves. I’ve worn them for 6 years to do all sorts of work. I’m on my 2nd pair in 6 years only because I threw the first pair away after handling a dead rat. I buy my gloves at my local Tractor Supply.
I’ve never tried White Ox cotton gloves. Can’t get them locally.
I mean this in the most respectful way. You look like you are in great shape for a man of your age. I like that these are made in the US and you seem to know what the word work really means to those of us who can actually put gloves to the test. It is hard to find a balance in longevity, affordability, dexterity, and protection. But you seem to have found a great contender for that spot. For these reasons I decided I will buy 2 pair and see what they can do for me in my line of work. I also decided I will subscribe to you for your admirable knowledge and honesty.
I appreciate the honest analysis. This is one of the reasons that I like your videos so much.
Been wearing them two kinds of gloves for 25 years. Your assessment on quality is correct.
Do they get more comfortable over time. I just bought them and the inside seams seem like they might rough your hands up.
@@clayfullmer they do get softer as you wear them. I think they are comfortable to wear. But my hands are already roughed up. I wear them so I don't lose skin off my hands lol.
@@clayfullmer they feel so soft and velvety when theyre new, whatre you talking about?
My father was a high rigging Forman in the Boilermakers union. He always wore White Ox. Fast forward 50 years later I am wearing the same brand. Probably have 5 pair in the shop right now. Usually hit them with a torch for a sec when they're new. I have all sorts of gloves but I always come back to them.
A recommendation and a testimonial to back it up with from a Craftsman. Essential information for those that appreciate your knowledge and experience. : )
So how come white ox north star 1014 gloves aren't available at any of my Iowa stores? Is it a regional thing? All we have are those yellow fleece chore gloves..
I bought these gloves are watching this video and I absolutely love them. Thanks for the recommendation and a great video.
Thanks!
This is the first time I've heard gloves wearing out faster described as an advantage. "You get to wear new gloves more often." Well, yes, I suppose so.
Yeah, but you have to spend more $ on replacing gloves.
@@totallyfrozen yeah but it’s also easy to lose gloves. Coming from a guy that regrettably spent about $60 on gloves past year
I prefer used gloves. Deerskin molds to your hand. Use them for everything.
I have used these gloves many times and just bought 3 more pairs on ebay for about $30.00 with shipping. Just about every pair I've had has torn on the middle finger. And this is just for home use; cutting branches, digging holes, carrying rocks. They are good for wet places/climates but I wouldn't call them durable. I'll start using tear mender or carpet seam glue as an ironworker suggested to make them last longer.
Simple subject marvelously executed - you should have your own PBS show.
Hi
That’s a double ply quilted palm equating to construction from canvas of 22 ounce thickness. And don’t forget the reconfigured index finger seam gives same protection as wrap around construction.
I have been a fan of these gloves since I started working back in 1984. Excellent work gloves. Made tough for hard working blue collar workers
Always enjoy watching your videos. Thank you for sharing.
This is indeed an excellent wearing model. I'd recommend their model, same palm design, with gauntlet cuffs. Those are great when doing work that can expose the palm side of your wrists to splinters or cuts. Furthermore, if you have sun sensitive hands, these gloves keep you skin from barbecuing on the steering wheel.
I agree with almost everything you talked about, my only qualm is mostly particular to me, I have large hands, most XXL sized gloves barely fit. I like leather gloves because they seem to break in easier than most. My hands used to ache for days after buying new rubberized, or canvas style gloves. They were stiff as a board and squeezed my hands with a kung fu death grip. My work doesn't require quite the level of protection as you described but I can appreciate the need for quality heavy duty gloves. Always enjoy your videos!
Wow, the video quality seems to have improved considerably! Good lighting!
The kind of guy that just makes you smile.
i work in sales. I'm 31. I think I'm missing something. There's a desire to build in me, to get my hands dirty, and to use my body. For some funny reason I looked down on the trades when I was in high school. With retrospection I didn't see myself as a tough enough guy to put up the work, Now I see differently. It's never too late but the switch might be hard. I have signed up for a woodworking class at a maker labs studio. It's not trades training but at least I'm reaching. Love your channel. You speak simple wisdom that is becoming far too rare in this gigabyte gigagulp world.
You should become an adult movie star instead.
You know, I know a guy who became a Crane Operator at 35 after apprenticing for a couple years. What I'm saying in all that is, it's never too late to pick up a new skill or trade. Many of the trades pay quite well too
I'm facing the same dilemma. Did you get any more direction from friends or family on what they think you should do?
@@colinfiggins3372 "The road to Hell is paved in best intentions."
Look... I don't know your family or friends. Most of us, most of the time, honestly want the best for our closest people. We just don't always know what that "best" is... so I'm not going to tell you to dismiss what your family tells you... or the friends who might know you more than you think you know yourself.
Just be careful about all the advice and direction. There's a little bit of personal internal bias that everybody puts into their "best advice". You need to understand (of course) that you're talking about making a change for yourself. It's not easy.
Carpentry and fabricating isn't easy. Engineering (and yes, it IS some engineering) isn't easy. The money's often slow, clients are squirrelly... and some are downright dishonest. The trades are FULL to overflowing with slackers who could've gotten a PhD out of high-school, could've been a contender, but would rather take an "easy route" to something they can do high... It's full of drugs and addicts, too... like the rest of the world.
I'd be remiss to paint you a "pretty picture" of rosy scenery and not include the distractions, disruptive and toxic people... etc...
If you have a career... it's okay to work that a while. Take this "change" on in smaller bites. EVERYTHING in life is a series of steps. You can make those big obnoxious and ambitious back-breaking, mind-warping steps... OR you can cut them down to manageable, simple, little steps.
Make it a hobby, to get your feet wet. Let the career (even that you hate it kinda) pay for some of your start-up... the hammers, drill, circle saw, squares, marking outfits... and practice some application. Let a guy "from the industry" know you're working on something, and take friendly advice, try to understand WHY he thinks it's supposed to be done a certain way.
As you gain a bit of confidence, because... well... let's face it. This stuff ain't rocket science. There's engineering involved, but that's just knowing the math... doing the hard stuff. The rules don't change...
As you get better, you can start making this hobby pay for itself... not just for Christmas presents that shorten the shopping for family and friends that wouldn't say "sh*t" to you if they had a mouthful.
Take a few odd-jobs. Help the neighbor down the street renovate (or completely rebuild) his shed. Set up a swingset for someone a few blocks out... Maybe you make a few bucks (feels like recovering from the tools) and maybe you just get your lawn mowed or an evening of lemonade (hard preferably) and a sunset watch from an old backyard swing... (don't forget to look for termite damage so you have another excuse to do something)... AND when the opportunity comes, someone will point you out to a local contractor...
ADMIT you're just starting out... a "frustrated amateur who wants to learn"... and be ready to step up. The right answer is never "oh hell no"... not in any form or fashion. The Right answer is, "I might not just yet, but I'll figure it out... Any tips?"
Finally, pop over to Lowe's, Home Depot, Harbor Freight, anywhere "hardware" usually... AND buy a "Pocket Ref"... You can't beat the shear mass of information in that little black book! It's got everything from mining-milling aggregate standards and jeweller's technical specifications for Diamond classes or geological terms and chemistry for ore... to drill bit sizes versus wire gauge, the resistance of single strand or multi-strand core wire and cable, copper OR aluminum... You can still look up the Semaphore Alphabet used by signalmen (with flags) in the Navy and Morse Code... It costs around ten or fifteen bucks (depending on what store) and the current one is "Fourth Edition"... They are worth collecting, since editions DO change information. Some gets dropped for obsolete or just to make space, while new stuff gets added... but it's GREAT for a start on just about any question you can possibly think to research.
AND... best of luck, no matter which way you lean or decide. The only true freedom any of us really has is the ability to make our own way... our own decisions in life. Enjoy it. ;o)
I was 30 when I started my HVAC schooling.. sometimes you just have to take a leap of faith.
Showa Atlas 370 Flat Nitrile Coated Gloves are by far my favorite glove. Working concrete no other gloves compare in a balance of sensitivity, warmth, durability, and protection.
I have found The gloves made for Milwaukee tools has done very well compared to other brands I have worn over the years. Pricey Yes , durability very good. I have never heard of White Oxford gloves until today, I will check them out, thank you!
Thank you for your advice and expertise. I'm looking into an apprenticeship in carpentry, now I know what type of work gloves are the best buy. And if not literally the #1 best close enough then.
I carry a lot of cinder block and abrasion is a problem. My current Wells Lamont leather gloves last a few weeks before the fingers abrade through. I'm gonna give White Ox a try. Thanks, very valuable video!
You are very good at storytelling. I love it when you share your experiences with us.
Oh boy! This channel is a gold mine.
I went and bought a pair after seeing this video. After two days of use, they are showing wear parts. they also shrunk after getting wet. I have short fingers and my fingers are pushing the tips of the gloves. Developing holes in a couple of fingertips. 12 bucks a pair at a local store.
Keep the video's coming for the advice and your enthusiasm for what you do!
Very informative, thank you sir! It's so neat to hear all the particulars when you review anything, because of your wealth of experience. Right now, I'm at the stage where I'm young, strong, and dumb, and I only ever wear gloves when I'm welding or doing rough work in the cold. At some point I'll wisen up and wear gloves to protect from all these little cuts I always get. My wife would appreciate that...
I'm a big fan of Atlas Therma Fits. Cotton/Poly blend with grippy palm. Great for wet, frozen manual labor. They dry quickly and make lifting easy. Maybe not the best for welding but work in a pinch. My brother wore them when we went up Denali. I'd consider it.
I'll give them a try. I like a thinner glove for finer work, definitely, but these look great for demolishing a tile shower surround, or stacking firewood. I hope they send you a case or two because you're going to sell a few pairs.
While they aren't suitable for some of the heavier work you were describing or any thing that will melt them, I highly recommend *Atlas* mesh and nitrile gloves... the black ones with the grey pads. The advantage they have is high feel and dexterity. They fit skin tight and offer a fair amount of protection from cuts, pokes and abrasion (great for wet work, shingling, digging, moving brush, wood, etc..)... anything that would give you a blister. There are *many* knock offs, but they don't compare favorably with the *Atlas* brand and they are machine washable. Really nice if you have smaller hands (like myself) and find most manly brands of gloves are baggy around the fingers.
I got my first pair of white ox gloves as a gift when I was learning to splice eyes in 5/8 cable, have not bought another brand in five years.
You need to create an online store. Your advice is worth getting something for sale. I'm ordering these gloves. And I agree you can do videos on all sorts of things including more on your vehicles. Thanks for sharing your knowledge.
i bought some of these gloves after seeing this video. i find that they are my favourite but they don't last as long as i hoped with rebar and formwork.
Good too know. I'm a union rodbuster that spends way to much money on gloves. I found it's best to just buy cheap cowhide gloves. No matter the material or expense, one day is about all I get out of them.
God bless this man his channel is awesome
The gloves that I use when shoveling or doing yard work are deer skin gloves.
Deerskin feels nice, but I can wear a pair out in 3 days of ranch work. Goatskin or heavy split cowhide for fence work.
They get shredded working on big tires. Especially when they get wet. They'll dry, the seams split and they're trash in a week or two.
I usually wear out leather or canvas gloves in two weeks. So I always buy cheap but comfortable gloves.
better then wranglerstar. love this channel
Luis Crespo wranglerstar is a wildland firefighter from bend Oregon and this guy is paid to to talk about crap
Luis Crespo Wrangler star just talks to hear his own head rattle. If one of his videos is 20 min, it's a safe bet that the same exact info could've been conveyed in a 10 min video (if not less). I can't remember the last time I watched one of his videos.
that_G_EvanP i’m a wildland firefighter and I only wear custom boots cause I know that they will last me many years and he knows what he is talking about cause he lives it this guy is paid to talk about crap that he doesn’t know what he is talking about
DJ Gibreheim You're entitled to your opinion but I'll take Essential Craftsman over Wranglerstar any day of the week. Not saying Wranglerstar doesn't have a good channel, I'm just stating my opinion.
P.S. I'm pretty sure Scott knows what he's talking about.
DJ Gibreheim ..
I watched this video and bought a pair of White Ox gloves. First day on a new job the guys saw my gloves and asked me if I wanted a pair of the rubbery nitrile gloves - you know, the kind that make your fingers sweat and stink. I looked them calmly in the eye and said no. Mind you, I've worn that kind of glove plenty in the past as a heavy equipment operator and ditch digger.
These gloves are have a long way to go from being perfectly broke in, but already after only a couple of days worth of use they are starting to conform to my hands, and I haven't had a single wood splinter or metal shaving poke threw them when I've been wearing them over the past two weeks.
Thanks for the glove recommendation!
These aren't bad gloves. I also use Milwaukee goat skin gloves and those are thin enough for great dexterity, but still offer decent protection. And they're only $10. I bought a few to have on hand to replace once a year and have even given them away to friends.
Good video and promotion of the product, being in construction and renovations for over 30 years gloves are important. Proper gloves for the work at hand are even more important.
I've been using these gloves while working at big box hardware store pulling whole deck orders by my lonesome and theses glove have saved my hands so many times, my only problem is that the work I'm doing they come apart in the thumb/palm seam but by then the fingertips are worn through. Thank you for the recommendation
So where do you get them. Amazon no tengo
I just joined the ironworkers union here in Seattle. Never done any construction. Our superintendent buys white ox gloves and they're great. But they're the gauntlet type glove. So they kind of slide off the hands (I'm a little guy) but I think the elastic cuff would be perfect. No slag in my gloves either.
I prefer leather. But in winter I use Tom Cats, yellow "matted" cotton, maybe a little thicker. I found that ShooGoo on the palms and fingers makes them slightly water proof, little better grip, and miles more wear. Around my area we have TearMender, its liquid latex good for sticking patches on denim bibs, but also good for coating gloves. ShooGoo by the way is basically silicon caulk.
If you wear them nitrile or latex gloves beneath them when working in wet that keeps the damp and cold off your hands
I needed this for my painting business thank you
I love these gloves, wear them when logging and other stuff but i think the fingers are a little short.
I like the liners, like socks for your hands and good for vibration. They start to grip good once they get a little dirt & oil on em
I bought a dozen via Ebay. A long journey from Pacific Northwest to Finland but totally worth it.
Just ordered a single pair to try out. Ordered through Fastenal. Price wasn't bad, and I couldn't foresee using a dozen anytime soon.
Just ordered some of these gloves by your recommendation. I want to see for myself if these gloves are as good as what saw in your video. I plan to wash and dry these in the laundry before using to see if they pre-shrink fit without the natural work shrinking time required. I like to live dangerously.
And?....how’d it turn out?
@@totallyfrozen No good. They shrank to much then the cuffs came un-stitched. Probably ont be buying again. Myabe my fault
I always wear the cheap leather with with the fabric gauntlet cuff. Always work, feel nice, smell nice and easy to pull on.
Can't compare tough cowhide to human skin. Cowhide leather is less vascularized, has far fewer glands in a given area, is designed to support a much thicker hair covering. All characteristics evolved for hard conditions. Good leather gloves will break-in like a second skin and as far as care? Put them on, wash with mild soap like you would your bare hands, towel dry, grab some mink oil or Obenauf's, and rub it in like you would using O'Keefes's.
you never logged and had a jagger go through your hand on a leather glove
Wildman of the Wynooch I've never had anything go through a good leather glove, that's the point.
I agree 100% except I don't wash mine. Only give them a treatment when I first get them and in about 4 months and then it's time for a new pair.
Working in a steel mill doing maintenance I use cotton. Beat the pants off of leather when oily and greasy, just fine for welding, more shock absorbtion and insulation from heat and cold, quick on and off, and cheap enough that you don't worry about wrecking a pair. The biggest downside is the grip out of the pack. They break in pretty well though.
Now, when I was rolling steel bars and grinding, painting, and stamping them by hand, soft leather palm with a breathable canvas back was the winner. Got about 18-20 working days before the right hand would wear out.
@@BlownF150 Your comment reminded me of the day that a candle caught the curtain alight when I was helping a friend with some work in his garden.
Rather than rip it down and stomp it in the carpet, I managed to put it out by beating the flames out with my cowhide gloves and then rubbing the smouldering remains out against my Levi's with my gloved hands.
My friend was amazed that my gloves survived it and my jeans were fine after a few washes.
Thanks for the advice and will order some as I go through gloves like water!
Good gloves are essential for hard work. Thanks for your input and your video is appreciated.
They sell some deerskin leather gloves here in my area that are awesome. I've had two pairs in the last 8 years. I've welded, wrenched , built fence, shoved snow and processed deer with the same gloves & they don't wear out plus they're soft and comfortable
I tried them, but they have ZERO grip (running a plastic handled hedge trimmer)
and a rose bush thorn had no problem getting thru the palm and finger. I got the #1016.
I'm pretty sure he was talking about the frayed metal wire things that would cut you when you're grabbing that junk.
I'm not sure how well that actually works. Though, you should of gotten gardening gloves, they are note suited to thorns
Interesting. Personally I’m partial to a pair of Mechanix Fabricators, but most of the threats to my hands have been sharp metal edges rather than spikes. They fit me great and they haven’t failed me yet, though they did cost a lot more than anything else I wear. I do know they don’t agree with brambles, but then natural spikes are microscopic points and make man-made points look dull. However, tool for the job, and gloves are but a tool. After being happy with the fit (an annoyance that has plagued me in the past), I picked up some Mechanix MPACT2s, and used them for damping vibration and impacts, such as from longsword or cycling. Happy with those too.
And now some heavy duty cotton gloves to add to the arsenal? Sure, why not, certainly at that price.
I love all your videos but the short and sweet vids with straight forward info or tips are my favorite. Please consider doing many of them at one sitting and then release them every day or every other day.
It looks like thats what he is doing given the last couple videos like this.
Tyler Greene Maybe your concept of every day or every other day differs from mine.
There's been a new video every 3 days or so. The last video that was recorded in this session looks to have been 2 weeks ago. Videos like this are best used when there will be a lull in content which is how it appears to he is using them.