You can also shape a keyway by putting boring bar in lathe tool post and move tool in and out using the carriage. control depth of cut with the cross slide.
Also what if you don't own a shaper. There is another way and you could have done that quicker by just using an end mill, cut the basic half round slot, then use a piece of square HSS in the mill or lathe tool post & with power off stroke down/across & slowly cut the corners of your keyway. Finish with a triangular/square file, job done. See Stefan Gotteswinter ruclips.net/video/s7MBl_cWXrc/видео.html
un pequeño consejo..cuando una pieza vuela fuera del plato tres veces su diametro uso obligatorio de punto giratorio...un dia vas a tener un disgusto mecanizando con esos voladizos..por otro lado guapo portaherramientas..un saludo
As soon as you said engineer I knyou were smart. But with no hands on experience. Keyway have been cut in steel with a shaper way before you were born.
I started by watching your drill press rebuild and assumed that you were just a guy restoring stuff as a hobby, but you have way more equipment than I thought and skills to use it. Did you ever finish that drill press?
When i started the drill press rebuild i didnt have this machines. I´m learning little by little. I needed that tool to finish the next episode of the drill press series. I will try to upload next part next week :)
Oh how cool idea thanks uploading video I want to know that how to make punching die to make any kind of shape like electric metal box wahser etc and how to make metal so hard like diomond tools thanks
Just mount the bar on the tool compound and put the part in the lathe chuck and then move the tool left to right and move tool in when making a cut and out when returning so not to drag the bit or the bit may get damaged , carbide cutter will crack off edge for sure going the wrong way on the work .
hola a todos, como puedo fabricar un micro-tornillo osea, tornillos para gafas o anteojos o lentes como les quieran decir, al tan pequeñito como se puede lograr ...saludos
You can also shape a keyway by putting boring bar in lathe tool post and move tool in and out using the carriage.
control depth of cut with the cross slide.
Don't mistake me this process we done 35yrs back but the concepts & technologies improved a lot, for your initiative i am appreciating
Aless, porque no mostraste el dispositivo colocado en el torno qué permite trabajar con la pieza colocada en el plato del torno y éste detenido?
Why did you not screwcut the thread on the lathe (instead of using a die, which is never ver accurate) or a combination of the two?
Great video! Please, tell us the name of the music that starts playing at 4:07
Thank You! It's a song from the RUclips music library. It's called "Cats Searching for the Truth"
@@AlessGonzalez Thanks!
I don't use the lathe to cut keyway, it hammers the headstock bearings. Its not a good idea if you want to keep your lathe accurate.
Was that aluminum?
Viendo lo que haces, me vendría muy bien tu ayuda. Cuando termine esta cuarentena, puedes ponerte en contacto conmigo?
Eres un pro!! Gran trabajo!!
I always find it amusing the lengths people will go to avoid simply buying a broach.
Also what if you don't own a shaper. There is another way and you could have done that quicker by just using an end mill, cut the basic half round slot, then use a piece of square HSS in the mill or lathe tool post & with power off stroke down/across & slowly cut the corners of your keyway. Finish with a triangular/square file, job done. See Stefan Gotteswinter ruclips.net/video/s7MBl_cWXrc/видео.html
Sir!!! I love it !! Excellent idea as well!! I'm going to build one myself and I wasn't sure how to. But now I am because of your video. Thank you!!!
Nice, I keep wanting a shaper but no space in shop.
Question, what edge finder was that, a self made?
👏👏👍 parabéns pela criatividade! Leonardi de são Gabriel do oeste Mato grosso do Sul Brasil .
Bardzo świetna robota pozdrawiam twórcę tego filmiku mile i serdecznie 👍👍👍👍
Que cómico ,con una limadora es obvio que se hace ,esperaba ver alguna herramienta casera
un pequeño consejo..cuando una pieza vuela fuera del plato tres veces su diametro uso obligatorio de punto giratorio...un dia vas a tener un disgusto mecanizando con esos voladizos..por otro lado guapo portaherramientas..un saludo
I am a retired Mechanical Engineer. That is fine in aluminium, you would have trouble with steel.
As soon as you said engineer I knyou were smart. But with no hands on experience. Keyway have been cut in steel with a shaper way before you were born.
Slotar machin ka key way tool kit granding kaise karte hai vidio before sir
Hola me encantó el vídeo ❤️😁
Nice work and good video. Thank you!
Amazing job! Thanks for share with us.
Thank you very much Lori!
try using this tool to cut steel very easy cutting key way in aluminium as you did
Allowable for st 42?
Nice! I'm stuck putting a file in a sawzall.
I started by watching your drill press rebuild and assumed that you were just a guy restoring stuff as a hobby, but you have way more equipment than I thought and skills to use it.
Did you ever finish that drill press?
When i started the drill press rebuild i didnt have this machines. I´m learning little by little. I needed that tool to finish the next episode of the drill press series. I will try to upload next part next week :)
Yeah, most of us have a lath in our shop. Heck, most of us don't even have a 'shop' - more like a corner to putter.
That's not the half of it. The machine at the end is called a shaper. If I only had the space for one of those...
very good video..thanks for your time
Excelente herramienta 👍👍👍👍👍
Если строгать в стали, то отжимать резец будет сильно
Miring ngunu bos boss 😀😂😀😂
Great job! 🙌
How to cut a keyway:
1. Have $$$ of machinery. 😫😭
2. Cut keyway.
Beautiful work though.
Oh how cool idea thanks uploading video I want to know that how to make punching die to make any kind of shape like electric metal box wahser etc and how to make metal so hard like diomond tools thanks
Que ingenio compañero te ha quedado genial. Un saludo.
Muchas gracias compi! Ahora que estamos en cuarentena puedo subir algún vídeo. Un saludo
Almost the end of the video before we discover it's a keyway cutting tool FOR A SHAPER, which most of us don't have access to.
Just mount the bar on the tool compound and put the part in the lathe chuck and then move the tool left to right and move tool in when making a cut and out when returning so not to drag the bit or the bit may get damaged , carbide cutter will crack off edge for sure going the wrong way on the work .
hola a todos, como puedo fabricar un micro-tornillo osea, tornillos para gafas o anteojos o lentes como les quieran decir, al tan pequeñito como se puede lograr ...saludos
Yo supongo que saldrán más barato comprarlo hecho
Good job, always interesting your video. Title first song, please?
Здорово , красиво, а какие фаски на детали!
What machone does it attach to?
It's a horizontal Shaper
Nice one ,something useful to make thank you.
Gran vídeo Aless. Hacia tiempo que no disfrutaba al ver un vídeo. La limadora debe ser una pasada e hipnotizante de ver.
Muchas gracias Rocha! Cuando acabe la cuarentena y vengas por Madrid dímelo y ye invito un rato a trastear con la limadora.
@@AlessGonzalez nnnn
@@AlessGonzalez nnnn
@@AlessGonzalez nnnn
@@AlessGonzalez nnnnnn
awesome sharing sir
Very good.......👍👍
From iraq well done
Hay quá ! Rất tuyệt vời !
Give me end song pls
Con esa forma de trabajar al aire sin punto de apoyo se demora un día haciendo la barra poco práctico soy tornero
guapisimo! vaya limadora buena
cant wait to get a lathe 😟
Buen trabajo. Un saludo.
Most enjoyable
TU N'AS PAS MONTRE ET EXPLIQUER COMMENT FONCTIONNE L'APAREIL ET QUELLE APAREIEL
Sae pisan damel spie-na, lengkap alatna. Ngarti teu sia
good tools
I went to the machine shop to make the keyway for my 8 " pulley..You know what,? this old man just cut the keyway by hand just using a chisel !!,
And probably did it better than any tool.
Ех,удивил.ты вручную папробуй пропилить паз под шпонку,вот это будет интересно
Se te olvido poner en el titulo que tienes una limadora, pequeño detalle!!! 🤣🤣🤣
Super
Uma ferramenta topo
Lo dejaste con juego.
Tenés q terminarlo a Lima y esmeril de última.
Wow thanks👌
So you went through with everything being nice and precise but you still didn't put the keyway in the middle of the coupling bore... 🤷♂️
Try that in a piece of heat treated 4140 and see how it goes!
Good
Excllent
thanks.
top.... Brasilll
Mantab👍
made everything out of steel, cut a key in steel
Why not just use a broaching tool, far more accurate.
V.good
🇧🇷👍
신기하네요
ever hear of a broach?
Good work
#technicalideaindwarka
very good video..thanks for your time