Wow wow wow😂 you are a true master😂 you were hurting my brain😂 when I was trying to figure out what you were doing😂 it will last 10,000 years😂 thank you so much for that video😂❤
Superb! I love the way you just went thru the process of building this without a lot of boring scenes showing you grinding, welding and machining. You’re an excellent craftsman and entertaining videographer. Thank you,
You can always spot the man that has tools and enjoys using them. Include a little knowledge and a lot of fussy and you end up with a lot of homebuilt better than factory bought stuff that suits a person's needs to the T. Another pretty good clue to that character was that vice, very swank. I always enjoy watching other people that know their way around the shop. Awesome build.
,,,,,,,,,,,,,,, ❤❤❤❤❤❤❤❤❤❤ ich glaube wenn er einen Hubschrauber bräuchte, würde er sich einen bauen. Fantastisch, saubere Arbeit ❤❤❤❤❤❤❤❤❤❤❤❤❤❤ !!!!!!!!
Nicely made. A few things need to be added. 1. volt meter 2. Temp meter for engine and hydraulic system. 3. Lights 4. A tow hitch. These suggestions do not mean I think you did a bad job. These ideas are here to take the machine to the next level. Thanks for sharing, Bob from Virginia USA
@spaz-tech of course, I didn't mention it because I felt that it would've been stating the obvious......😂 Don't forget Foxtails on the radio antennas! Would a mini fridge be going to far??
This customized truck combines power and functionality, embodying a hands-on approach to engineering. With a 500cc engine, it's a compact powerhouse designed for efficient and versatile hauling, demonstrating the DIY spirit in the world of hydraulic dump trucks.
I may be way off but that rear end resembles those on riding mowers like the Murray rear or mid engine riders. If that's what this one is that will be where this machine fails providing its built well and designed well. The drives I'm referring to are famous for cracking and breaking if put under a heavy strain or when they get hot and start slipping.
sweet cart .id be careful on the payload though the tuff torque diffs dont like heavy loads esp with hills.ive blown a ton of those things out at work.
Install a piece of mirror polished stainless steel sheet metal on the top, aft edge of dump bucket such that when it is in the full dump position you can see when the bucket is empty. :)
VC é inteligente é,! Eu quero vê vc construir o tanque dos Thundercats....eu aqui assistindo seus incríveis vídeos do seu trabalho maravilhoso de Teresina Piauí Brasil 🎉🎉🎉
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Yes it’s a known fact that your generation is being feminized since birth due to the everyday plastics being used for all your drinking water and store bought foods
Start with a lawnmower take the hood off add the wheelbarrow to the front instead of the hood, and then use hydraulics to lift it up and down you don’t have to build it from scratch
That was a awesome job sir. I love that little dump truck. You have some heavy duty tools and you are very intelligent sir. I gave this video a GIGANTIC THUMBS UP!👍
@@googleuser4009 The one that's not bright is you by using incorrect wording like "I'm not sure if YOUR very bright" the word YOUR is used incorrectly, it's suppose to be YOU'RE not your very bright🤣🤣🤣🤣😜🤪😜🤪😜🤪😆😅😅😆😆😅😅😅😅😆😅😅😅😆😆😆😆😆😆😅😅😅😅😂😂😂😂😂😂😂😂😂🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
This is my second channel, where I publish old projects with refreshed video editing and without music, I will also post longer project tests :)
and MADE IN POLAND?
Wow wow wow😂 you are a true master😂 you were hurting my brain😂 when I was trying to figure out what you were doing😂 it will last 10,000 years😂 thank you so much for that video😂❤
Love the intro 👍
cool stuff 🥳
Okelah jalo begitu
@@Markum-ud2bdI'm also getting that vibe :)
Superb! I love the way you just went thru the process of building this without a lot of boring scenes showing you grinding, welding and machining. You’re an excellent craftsman and entertaining videographer. Thank you,
For a home workshop creation this is beautifully overengineered and very professionally built 👍
That's a well built unit. Shure beats a wheelbarrow any day. Great use of material and craftsmanship.
I am from Iran, I really enjoy when I see that someone has so much knowledge together, bravo👍👍
Хочу сказать только одно, если что то хочешь сделать хорошо, то сделай это сам. Хороший проект, молодец.
As a retired aerospace machinist I enjoy watching someone with your skills. Nice job.
ياباشا اية العظمة والجمال ده ، بارع مشاء الله علية ، تسلم ايدك بجد 👍👍👍👍👍👍
You can always spot the man that has tools and enjoys using them. Include a little knowledge and a lot of fussy and you end up with a lot of homebuilt better than factory bought stuff that suits a person's needs to the T. Another pretty good clue to that character was that vice, very swank. I always enjoy watching other people that know their way around the shop. Awesome build.
,,,,,,,,,,,,,,, ❤❤❤❤❤❤❤❤❤❤ ich glaube wenn er einen Hubschrauber bräuchte, würde er sich einen bauen. Fantastisch, saubere Arbeit ❤❤❤❤❤❤❤❤❤❤❤❤❤❤ !!!!!!!!
Awesome Georgia buggy, only one suggestion, put your hydraulic filter on the return side. The pump will start cavitating if the filter gets clogged
Excellent video man and great job with the design and building. I hope you get many years of use out of your machine.
Thank you 😁
Nicely made. A few things need to be added.
1. volt meter
2. Temp meter for engine and hydraulic system.
3. Lights
4. A tow hitch.
These suggestions do not mean I think you did a bad job. These ideas are here to take the machine to the next level.
Thanks for sharing, Bob from Virginia USA
Don't forget satnav! 😂
@CybertuxSpain how about CCTV? Maybe a video screen so movies can be played when traveling plus don't forget a fridge for refreshment!
A rear view mirror to hang fuzzy dice 😂
@spaz-tech of course, I didn't mention it because I felt that it would've been stating the obvious......😂
Don't forget Foxtails on the radio antennas!
Would a mini fridge be going to far??
Good jop 🎉
This customized truck combines power and functionality, embodying a hands-on approach to engineering. With a 500cc engine, it's a compact powerhouse designed for efficient and versatile hauling, demonstrating the DIY spirit in the world of hydraulic dump trucks.
This is a unique, unprecedented, unparalleled design and workmanship. Perfect achievement.Thanks.
Хороший стимул -ТВОРИТЬ!. ТВОРИТЬ НУЖНЫЕ ВЕЩИ🎉🎉🎉!!!
All you need to do is add a small plow to the front of it and you can use it like a small grade for sand gravel dirt
That's just too kool
I may be way off but that rear end resembles those on riding mowers like the Murray rear or mid engine riders. If that's what this one is that will be where this machine fails providing its built well and designed well. The drives I'm referring to are famous for cracking and breaking if put under a heavy strain or when they get hot and start slipping.
This guy is quite the engineer that machine looks really good
Браво, молодец с большой буквы.
Hammermässig. Sehr gut umgesetzt, sehr sauber gearbeitet. Wow. Ich ziehe meinen Hut 😊
That fellow has some skills. I'd like to one like that
We call them power buggy at work. Nice machine 👏 😮
You should get job with Muck Truck and help them build a better more advanced truck, nice job on this...
ótimo projeto realizado, agora falta só uma cobertura de Sol e Chuva!
Your freehand plasma and death wheel cutting are impressively straight
Nice toy. I can see with the skillset you possess you have been a fabricator for more then 10 yrs.
Just brilliant!! Loved watching that 👍👍👍
Aku lagi suka sama chanal ttg inspirasi tentang mesin.
Отличный помощник!!!
Very nice build and good video for us to follow along. Cheers
This was very cool to watch. Thank you for sharing your skills and time.
sweet cart .id be careful on the payload though the tuff torque diffs dont like heavy loads esp with hills.ive blown a ton of those things out at work.
Must be nice to have the proper tools to do this type of project.
Çok güzel olmuş emeğine sağlık. Türkiye den selamlar
One of the guys you want on your apocalypse team
Install a piece of mirror polished stainless steel sheet metal on the top, aft edge of dump bucket such that when it is in the full dump position you can see when the bucket is empty. :)
He is a genius he work perfect
You could have Bought a farm tractor for what you have into that thing but there is nothing like building something with your own two hands. Good job.
Nicely engineered, well done!
Очень толстый материал местами а это лишняя масса.А вообще здорово 👍
Nice,, really like the power assist dump
13:25 I would suggest that you flip that tensioner around.
Awesome build BTW
VC é inteligente é,! Eu quero
vê vc construir o tanque dos Thundercats....eu aqui assistindo seus incríveis vídeos do seu trabalho maravilhoso de Teresina Piauí Brasil 🎉🎉🎉
I don't know about making it but I'd love driving it if it could dump a little further
$50,000 worth of tools and a couple thousand dollars worth of materials and you can make one just like this! Nice little “homemade” project!
Yeah and, still home made, not budget build, not diy friendly.
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
,,,,,,,,,,,,,,,,daß hat nichts mit Ingeneuerwissenschaften zu tun. Daß ist einfach die Arbeit eines Maschinenbauschlossers 😊😊😊😊😊😊 !!!!!!!!!!
Always needs a million dollar workshop😮
I have trouble changing spark plugs in my truck and he built this from nothing awesome job
Yes it’s a known fact that your generation is being feminized since birth due to the everyday plastics being used for all your drinking water and store bought foods
Great way to repurpose a zero turn mower. I could use one of those here.
Thank you for no music. Just the sound of real creativity.
Very very well done, Great idea.
SO CLEAN BRO......WELL DONE
Just as good the second time 👍
Start with a lawnmower take the hood off add the wheelbarrow to the front instead of the hood, and then use hydraulics to lift it up and down you don’t have to build it from scratch
Fantastic job. This channel deserves way more subs
Thank you 😁
This has always been a favorite video. God bless.
Thank you 😁
You now have one more subscriber Sir.
You're a world class craftsman, excellent video.
Gran bel lavoro,complimenti👏👍💪👋
Grazie 😁
Congratulations, great job.
Awesome! ❤ Now you need to do a video for a snowblower attachment?
I hope you fished the fines out of that hydraulic tank! They would do in your hydraulic system in a heartbeat!!!!
You is the best 👍💰
bravo mon gars c'est du beau travail rien à dire si ce n'est que pour réaliser une brouette comme celle la il faut etre bon en mecanique , merci,
高手在民间
Muito bom, criatividade é tudo.💯👏👏👏👏👏
Outstanding watched from start to finish.
Totally the cool part!
This is really very good work.
And you did it all yourself.
My respect for you.
Many thanks for this interesting tutorial.
A very clever man indeed
Absolutely not made in china , kuddos to you thanks for sharing from Mexico
this thing is so solid haha love it!
Not exactly my kinda Project, but very well built considering the challenges. Well done!
A W E S O M E!!! 👌👌👌
Very high level of talent. Just found your channel. Looking forward to viewing more!
Polak potrafi !!! ;D
Создать сложно -очень просто . создать просто -очень сложно К тачке приделать ось и поставить еще одно колесо и все проблемы Физический труд полезный
This guy is frickin awesome! 👍🏻
That was a awesome job sir. I love that little dump truck. You have some heavy duty tools and you are very intelligent sir. I gave this video a GIGANTIC THUMBS UP!👍
Not so sure if your very bright there sir😅
@@googleuser4009 The one that's not bright is you by using incorrect wording like "I'm not sure if YOUR very bright" the word YOUR is used incorrectly, it's suppose to be YOU'RE not your very bright🤣🤣🤣🤣😜🤪😜🤪😜🤪😆😅😅😆😆😅😅😅😅😆😅😅😅😆😆😆😆😆😆😅😅😅😅😂😂😂😂😂😂😂😂😂🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Dobrá práce
Omg this guy is crazy good
Good job mister beautifully done professionally made well done
Thank you 😁
WOW! WAY TO GO!🤙🤙🤙
Super! Danke ! 😍🤗
You make it look easy!
What a work shop
This guy knows how to change his own oil.
You built a Georgia Buggy On Crack with a seat. That's a beast. Very Impressive. 😊
Thank you 😁
Simply amazing craftsmanship
Bravo monsieur vous êtes un génie 👍
Wow that is very impressive 👍👍
Great video.
Well I'm impressed
Hi....
Very Nice work, congratulations...
My nane is Fernando, I live in Brazil.
Good build
Cant wait for an archeologist to find one.❤
That's awesome!!
That’s some genius shit there very impressive. Excellent job.
Impressive craftmanship
Super 👍👍👍💯💯💯📺📺📺... Dla zasięgu..