@@shaneomatic91 I have a 2013 GT s197. I miss her so much….sold her to sponsor some cement work in the back yard for daughter to run and play. It’s been like 4 years now. I was debating on a Vmp, Pro Charger, or a Paxton. I believe all 3 is great, because it’s runs on belt, and no lag time…instant juice 🤗. Keep us posted on how the Paxton is treating you,? I believe with stock internal…max boost is a 9…10 is pushing it. Just a pulley update I believe. You have all the requirements to hit 9-10lb. Have fun man, and continue to breaks them necks!!✌🏼
@@fatsmile77 yeah man you gotta do what you gotta do. I’m working on some videos now for it. Yeah I have to get a boost gauge in there but that psi is about right. It is on E85, and the 3.8 is still on there. I plan to swap to a 3.33 or 3.5 pulley. Not on this motor tho. This is a stock un opened gen 1. I’ve had a brand new gen 2 sitting on a stand for like 3 years. Once that goes in I’m gonna pulley down. I’ve been focusing on my Eagle talon at the moment trying to get that car squared away. I’d like the mustang to live comfortably around 800hp and I’d be happy. I have the fuel system for it and all the supporting mods to do it just gotta drop the gen 2 in first.
@@fatsmile77 if you were to do it again I’d get either a VMP gen2R ,a Paxton or I’ve heard rumors of possibly ESS making a kit for the s197….that’s not confirmed yet but they’re basically the leader in centrifugal blowers for s550. I really wanted one of those but I wasn’t gonna wait around.
I’m in Houston too. I feel your pain. Lol that’s why I haven’t switch to e85 yet. I have the tune but I’m waiting for it to cool down a bit to switch fuels. If you do get one just get a 160 thermostat and that’ll help out a bit.
@@cjcullar 2 constant, 1 on the Hobbs. Fueling is perfect. This is way over kill for my setup as it is right now. I put this fuel system on to plan for the future. You can get away with a BAP on 93 octane with a 3.8 pulley.
@@shaneomatic91 that’s exactly what I planned to do on my set up, I’m knocking out the Ben calimer stage 2 trans and a man tic first, then perhaps a Gen 2 short block with a Paxton 2200, FIC 1000’s, BAP and to get a revision by Lund. Appreciate the insight !!! I’ll be watching brother !
@@cjcullar yes sir! Glad to help. I have a calimer mt82 as well but with a exedy Mach 600 and a lightened steel flywheel. It works well so far. If you need anything else let me know 👍
Thanks man! I’m gonna sell the lu47 injectors, pmas for sure. Idk about the manifold yet. Hit me up on IG if you’re interested. I got a link in the about section 👍👍
Thanks man, I appreciate it. Yeah the only reason I went CJ originally is because I got a stupid deal on it. Used but never installed on eBay. I would not pay new prices for it. Not worth it unless you’re max effort n/a. So if you can shop around and find a cheap setup cool but yeah I’d go straight to boost if that’s you’re end goal. Wish they had a ESS kit already for s197 but I wasn’t gonna wait around.
@@SK_727 same bro. I recorded a 10r80 vortech s550 on my channel at around 850+. It was straight getting it! That’s what sold me to buy one after that video. And driving regular feels like a stock car if you disregard all the noises lol
I would have had to do something but I ended up eliminating the tank because the sprayers were never on the car when I bought it. I assumed they put on the cowl hood and didn’t care to install them. Piping hits the tank. 🙄
@@CharlieDaMaster no I don’t daily it. lol I have another shit box and a truck I daily. I just clean it with some spray when it gets dirty 🤣 I used a chemical guys ceramic coating for windows on it too, Works pretty well. Plus it’s in the garage when I don’t drive it.
Thanks dude. Mine has around 80k miles I think. I have a brand new gen 2 coyote short block sitting in my garage tho. Lol So that will go in a little later on and we’ll pulley down. You may be alright with this setup on 93. 3.8 pulley might make around 580-600 hp. It all depends on your self control. Lol. I have the E85 tune I’m about to start the process just waiting on it to cool down a little. Been 100 + degrees for a month or 2 here.
I’m currently installing a motion raceworks. I’ll be posting an updated video on the car soon. In this video it just had jlt catch cans that were rigged up from the cobra jet set up just to get it running. Below is the current one I have. motionraceworks.com/products/32-100tsp-texas-speed-catch-can-kit
@@shaneomatic91 got ya, Thanks. I’m using JPC filter for now but they are full, JPC for whatever reason don’t want to tell me what filters they are when I called and instead tried to sell me another kit with $20 off. GTFO. I’m either going to get oil cans or build my own filter setup and just replace filters every 6 months when doing oil changes.
@@Ben-y9h3y yeah screw all that shit, I’m just doing my own thing with what I have. My buddy runs the same one I have on his s197 and has zero issues. It’s just not a direct bolt on but it’s self explanatory.
@@shaneomatic91 yeah these shops are out of control. Never buying anything else from JPC. They should have made filters replaceable and should not hide what filters they are.
For tuning what device and what tuner do you have? I use an SCTx4 with PBD but I kinda wanna go to shoemaker and get an RTD before I boost. Is it worth it?
I’m tuned by Lund with the ngauge. Ngauge isn’t produced anymore but they have the LRX which seems to be very cool and similar to it. 93 and E85 tune. I stay on E85 tho. It’s been great with Lund and I’ve had zero issues.
If you can get tuned by Ken from PBD, he is better than Shoemaker. I’m running PBD tune with Rob tuning my car and before I was tuned by Ken specifically. And For my liking Ken is better and tune is smoother. Not sure if Ken tunes these days, they seem like they grew alot.
I bought it on American muscles website. I had another guy ask me that and I went to send him the link and they don’t carry it anymore. 🙄 but it was called “SR Performance Universal 16-Inch High Performance Slim Electric Radiator fan” hope that helps you out.
Total with shipping and tax I had to look it up. $6,959 to be exact. That came with the ID1050X injectors, base 3.8 pulley, it came with regular hose clamps instead of T bolt clamps (I had t bolt clamps already at the house, if you don’t have them I’d add that to the kit if I were you) I also got regular gears in the blower (no straight cut gears) it was from team Beefcake’s website.
@@ponyboycash13 mostly because of fitment and going from a oval throttle body to a round pipe would require either a reducer coupler or fabricating the charge pipe. I had a CJ on it for the n/a setup. Boss is just a better option for boost. Yeah the CJ can be done but it’ll just complicates things more on the tuning side as well and it’s not worth it as far as gains. I love the supercharger. Pulls great and driving around when not in boost it’s pretty much like a regular Mustang other than all the blow off noise. lol. I’m actually planning on recording a video update this weekend most likely of it. Been a while since I showed it on my channel.
That dsm doe!❤
Yes! I did the mustang first to clear space in the garage to work on the DSM. Way too many big boxes stacked up. Lol
@shaneomatic9188 Stanger sounds good man!
@@johnthecarguy2414 thanks John. I still want you to come check the talon out sometime. I’ll need your advice too.
@@shaneomatic91 I'll try to come out soon
@@johnthecarguy2414 awesome. 👍👍
Man….that sounds so raw. Lund is a good tune, one of the best tuner. Enjoy your cool aid smile man.✌🏼
Yeah man I love it. Lund is awesome. I’m working on some more updated videos on it, been a while since I showed it.
@@shaneomatic91
I have a 2013 GT s197. I miss her so much….sold her to sponsor some cement work in the back yard for daughter to run and play. It’s been like 4 years now. I was debating on a Vmp, Pro Charger, or a Paxton. I believe all 3 is great, because it’s runs on belt, and no lag time…instant juice 🤗. Keep us posted on how the Paxton is treating you,? I believe with stock internal…max boost is a 9…10 is pushing it. Just a pulley update I believe. You have all the requirements to hit 9-10lb. Have fun man, and continue to breaks them necks!!✌🏼
@@fatsmile77 yeah man you gotta do what you gotta do. I’m working on some videos now for it. Yeah I have to get a boost gauge in there but that psi is about right. It is on E85, and the 3.8 is still on there. I plan to swap to a 3.33 or 3.5 pulley. Not on this motor tho. This is a stock un opened gen 1. I’ve had a brand new gen 2 sitting on a stand for like 3 years. Once that goes in I’m gonna pulley down. I’ve been focusing on my Eagle talon at the moment trying to get that car squared away. I’d like the mustang to live comfortably around 800hp and I’d be happy. I have the fuel system for it and all the supporting mods to do it just gotta drop the gen 2 in first.
@@fatsmile77 if you were to do it again I’d get either a VMP gen2R ,a Paxton or I’ve heard rumors of possibly ESS making a kit for the s197….that’s not confirmed yet but they’re basically the leader in centrifugal blowers for s550. I really wanted one of those but I wasn’t gonna wait around.
Yeah I want this same set up, it’s just damn hot here in Houston mam, can’t deal with the heat as is in my mustang
I’m in Houston too. I feel your pain. Lol that’s why I haven’t switch to e85 yet. I have the tune but I’m waiting for it to cool down a bit to switch fuels. If you do get one just get a 160 thermostat and that’ll help out a bit.
@@shaneomatic91 I’ll keep that in mind, did you have any issues with fueling ? Are you running 3 constant or hob switch?
@@cjcullar 2 constant, 1 on the Hobbs. Fueling is perfect. This is way over kill for my setup as it is right now. I put this fuel system on to plan for the future. You can get away with a BAP on 93 octane with a 3.8 pulley.
@@shaneomatic91 that’s exactly what I planned to do on my set up, I’m knocking out the Ben calimer stage 2 trans and a man tic first, then perhaps a Gen 2 short block with a Paxton 2200, FIC 1000’s, BAP and to get a revision by Lund. Appreciate the insight !!! I’ll be watching brother !
@@cjcullar yes sir! Glad to help. I have a calimer mt82 as well but with a exedy Mach 600 and a lightened steel flywheel. It works well so far. If you need anything else let me know 👍
Omg. Bro sounds amazing
Thanks man. 👍 it’s louder than I thought 🤣
@shaneomatic9188 Well, in this case, that is a good thing.. head turner for real..
@@chrissdsm yes exactly. Lol my car isn’t that raspy and I’m glad the blower is louder.
✈️✈️✈️🔥🔥
👀
Simple combo that works.
That’s why I went this route.
Very nice! Are you selling the old cobra jet setup? 🇺🇸
Thanks man! I’m gonna sell the lu47 injectors, pmas for sure. Idk about the manifold yet. Hit me up on IG if you’re interested. I got a link in the about section 👍👍
@@shaneomatic91 ok 👍🏼
It sounds really good.
I didn’t expect it to be that loud 🤣
Nice work! That sound never gets old!
It really doesn’t. I love it.
New intro!!! 🔥🔥 also that pro charger tho! Keep it up!
*paxton* lol yes!
Sounds sick!!
Hell yeah. It’s amazing.
Bro that smile on your face when your were leaving the house says it all! The jet sound 🔥🔥🔥
I’m in love with the way it sounds. 😂
im in houston to man hopfully i can see you around town one of these days
Nice. Hit me up on IG. I’m in Rosenberg area.
Very nice, it’ll be a good setup to grow into.
That was my thought process too when I bought it. Thanks for watching 👍👍
Love the video! Have a 14 that I was considering going CJ but... seems like a better choice to just go straight to boost! Car Sounds awesome!!
Thanks man, I appreciate it. Yeah the only reason I went CJ originally is because I got a stupid deal on it. Used but never installed on eBay. I would not pay new prices for it. Not worth it unless you’re max effort n/a. So if you can shop around and find a cheap setup cool but yeah I’d go straight to boost if that’s you’re end goal. Wish they had a ESS kit already for s197 but I wasn’t gonna wait around.
@shaneomatic9188 ya makes sense! I'm sure cj setup was a blast regardless but... seems like boost and you can for the most part call it a day!
@@SK_727 oh yeah. CJ was fun but this is funner. Is that a word? 🤣
@shaneomatic9188 for sure! The noises from a centri setup are just awesome as well! Drove a vortech 6r80 s550 at 800-850whp and it was really wild.
@@SK_727 same bro. I recorded a 10r80 vortech s550 on my channel at around 850+. It was straight getting it! That’s what sold me to buy one after that video. And driving regular feels like a stock car if you disregard all the noises lol
Hey bro I’m am also from Houston TX and currently installing the same kit on my 14 Track Pack. Did you had relocate your windshield washer fluid?
I would have had to do something but I ended up eliminating the tank because the sprayers were never on the car when I bought it. I assumed they put on the cowl hood and didn’t care to install them. Piping hits the tank. 🙄
@@shaneomatic91I’m assuming you don’t daily the car, but how do you keep the windshield clean? My sprayers were disconnected too
@@CharlieDaMaster no I don’t daily it. lol I have another shit box and a truck I daily. I just clean it with some spray when it gets dirty 🤣 I used a chemical guys ceramic coating for windows on it too, Works pretty well. Plus it’s in the garage when I don’t drive it.
Nice man. Thinking about doing the same on my 12 but it just turned over 130k.
Thanks dude. Mine has around 80k miles I think. I have a brand new gen 2 coyote short block sitting in my garage tho. Lol So that will go in a little later on and we’ll pulley down. You may be alright with this setup on 93. 3.8 pulley might make around 580-600 hp. It all depends on your self control. Lol. I have the E85 tune I’m about to start the process just waiting on it to cool down a little. Been 100 + degrees for a month or 2 here.
Hello,
What catch can are you using?
I’m currently installing a motion raceworks. I’ll be posting an updated video on the car soon. In this video it just had jlt catch cans that were rigged up from the cobra jet set up just to get it running. Below is the current one I have.
motionraceworks.com/products/32-100tsp-texas-speed-catch-can-kit
@@shaneomatic91 got ya,
Thanks. I’m using JPC filter for now but they are full, JPC for whatever reason don’t want to tell me what filters they are when I called and instead tried to sell me another kit with $20 off. GTFO.
I’m either going to get oil cans or build my own filter setup and just replace filters every 6 months when doing oil changes.
@@Ben-y9h3y yeah screw all that shit, I’m just doing my own thing with what I have. My buddy runs the same one I have on his s197 and has zero issues. It’s just not a direct bolt on but it’s self explanatory.
@@shaneomatic91 yeah these shops are out of control. Never buying anything else from JPC. They should have made filters replaceable and should not hide what filters they are.
@@Ben-y9h3y you can’t cross reference something from another company? Or even eBay, Amazon at least?
For tuning what device and what tuner do you have? I use an SCTx4 with PBD but I kinda wanna go to shoemaker and get an RTD before I boost. Is it worth it?
I’m tuned by Lund with the ngauge. Ngauge isn’t produced anymore but they have the LRX which seems to be very cool and similar to it. 93 and E85 tune. I stay on E85 tho. It’s been great with Lund and I’ve had zero issues.
If you can get tuned by Ken from PBD, he is better than Shoemaker. I’m running PBD tune with Rob tuning my car and before I was tuned by Ken specifically. And For my liking Ken is better and tune is smoother. Not sure if Ken tunes these days, they seem like they grew alot.
@@Ben-y9h3y either or. I’m lund tuned but PBD and Rob are good too.
Where do you get the fan at?
I bought it on American muscles website. I had another guy ask me that and I went to send him the link and they don’t carry it anymore. 🙄 but it was called “SR Performance Universal 16-Inch High Performance Slim Electric Radiator fan” hope that helps you out.
Hows my mpgs gonna ne using the 1050 injectors
Depends on your right foot. 😂
How much was this kit?
Total with shipping and tax I had to look it up. $6,959 to be exact. That came with the ID1050X injectors, base 3.8 pulley, it came with regular hose clamps instead of T bolt clamps (I had t bolt clamps already at the house, if you don’t have them I’d add that to the kit if I were you) I also got regular gears in the blower (no straight cut gears) it was from team Beefcake’s website.
Could’ve at least showed how to do the install
It wasn’t an install video. But if you have a question I’ll be glad to answer.
Absolutely glorious my friend 🫡 can’t wait to see it rip!👊😎
Thanks man.
Just curious why did you go for boss mani over cobra jet? And how you like supercharger? Im thinking of getting this for mine.
@@ponyboycash13 mostly because of fitment and going from a oval throttle body to a round pipe would require either a reducer coupler or fabricating the charge pipe. I had a CJ on it for the n/a setup. Boss is just a better option for boost. Yeah the CJ can be done but it’ll just complicates things more on the tuning side as well and it’s not worth it as far as gains. I love the supercharger. Pulls great and driving around when not in boost it’s pretty much like a regular Mustang other than all the blow off noise. lol. I’m actually planning on recording a video update this weekend most likely of it. Been a while since I showed it on my channel.