GMC Yukon Complete SPYDER Headlights Halo LED Installation | With Wiring Diagram | Easy DIY

Here is the Best DIY Spyder headlight Halo Led installation, With wiring diagram. For your 2005 GMC Yukon Denali. Are you trying to find a good RUclips that will show you exactly how to install and “ Wire in ”your new Spyder Halo led Headlights? Well just like you I could not find one that shows you how to wire it in. This should also work on 2000 to 2006 GMC, Truck,Yukon, Denali, Suburban, Tahoe, Escalade, but double check. I will show you how to install your new Spyder Headlights and teach you how to read a Auto wiring Diagram/Schematic. If you have been watching my RUclips videos you know a lot of my Yukon DIY repair videos don’t take a lot of tools. Yes you can do this yourself. I had a guy at auto electric shop quote me 500bucks to wire these in. I know a person that had there Halo lights installed and they charged them 900bucks! That’s Crazy! You can do this yourself. Watch this video a few times to develop your confidence. Trust me you can do this.
Buy me a coffee. Please Note: This channel is 95% privately funded by me, And I do my own stunts. But your 5% can helps me make more content like this. If this video was helpful or even saved you lots of money please pay it forward by supporting this channel so we can continue producing how-to videos to benefit others. Through your support, you bring value to you and other people's lives. Thanks for your generous support.
PayPal
paypal.me/nots...

[@keepingitcountry412]

I appreciate the detail in the video. It hard to find people who actually go over how to install something in every step

[@notsofast2325]

Trust me I know what you mean. Thank you., don't forget to check out my other videos, I try to do 2 a week.

[@labreeellis3685]

I've watched five different videos on this and yours far the best. I'm going to look on Amazon for the wire splicer that you have right now. Thanks alot. You just got a new subscriber. Do you have any videos regarding the rear defrost electrical issues? I believe we have the same truck. I have a 04 GMC YUKON DENALI XL.

[@notsofast2325]

Thanks! you can buy this wire splicer at Harbor Freight
ruclips.net/video/1wLYnadQIQc/видео.htmlsi=sIFZ6KlRtP-xztfG
ruclips.net/video/ly4AaHPJpo8/видео.htmlsi=WD8iKbXgYVtU2X2q

[@billybrown640]

Very informative....Really liked this video. Only thing did you do anything about the gap?

[@notsofast2325]

yeah, i just had to adjust it.

[@chrischambers9620]

Thank you excellent job describing and showing how to do it.

[@notsofast2325]

Thank you ! Please, Check out my next video, It's going to be about something i did to My Spyder Halos and Daytime running lights.

[@VALERIAGAR-y3j]

Sir, you just motivated me to do it I have a bag with everything I bought to get it done ✅

[@notsofast2325]

Awesome!! it's not that hard to do. Just take your time. Let us know how it turned out. Dont forget to subscribe. Good Luck

[@VALERIAGAR-y3j]

It ended up great sir, you were totally right when you said “Easy job with the right tool” those wire strippers you suggested worked like a dream, LIKED AND SUBSCRIBED 😊

[@notsofast2325]

@@VALERIAGAR-y3j Awesome !! Another happy customer. Welcome aboard!

[@danhoffman1051]

Great video thank you so much, like you said all others stop short of explaining the wiring, very detailed. Thanks again.

[@notsofast2325]

your very welcome!

[@AliA-ss2sc]

God job, I got mine installed after I reviewed your instructions.

[@notsofast2325]

Glad I could help

[@otfmenaceva2515]

Good job on showing which wire was the positive 👍

[@notsofast2325]

Your very welcome.don't forget to like and subscribe!

[@jesuslopez-oj1kr]

I like

[@alexlopez-dk4jq]

Can you put LED lights in the Halos?

[@soulcages01]

I really appreciate the time and effort you put into these videos! You are absolutely correct that no one has explained the wiring schematics at all in other videos In have seen--this is by far the best step by step video In have seen on the Spyder lights! Bravo and well done!!

[@notsofast2325]

I try. It takes more time as you know to do these videos. But when I hear compliments like yours , it makes it worth while. Thank you.

[@jules4858]

Thank you for the video Very informative Please make More Content

[@notsofast2325]

I'm working on it. thank you very much!

[@unionse7en]

smh it's amazing how people are concerned with how the assemblies look on the car instead of how the beam patterns look on the road..no beam pattern shots etc. this is so common

[@notsofast2325]

thanks for your input

[@gsxrplatinum]

Did I miss something?? What did you do with all the red and black wires ?!

[@j.balance7844]

Thank you very much for the info!

[@notsofast2325]

No problem..

[@HackMassacre]

Best video. Thank you

[@graygray1]

Awesome detail..much needed. Thanks!

[@kcycle1308]

Awesome! Do you know how to install the LEDs if you're using them as blinkers as well? So running lights and blinkers?

[@notsofast2325]

I can figure it out..

[@jryonhenderson2901]

Good vid

[@notsofast2325]

Thank you.

[@oldmansilas559]

The only thing I would’ve done is use heat shrink, instead of electrical tape.

[@notsofast2325]

yeah i know.. it is what it is..

[@soulcages01]

We're you able to address your gap issue, and if so, may I ask how you went about solving it?

[@notsofast2325]

I think my hood needs adjusting. Plus there are a few guys out there that say the same thing. But for the uneducated eye you won't know the difference. So for now I'm going with it.

[@soulcages01]

@@notsofast2325 I'm thinking the metal backing plate that the headlights fit in might be a possible fix, but I am sure there is no wiggle room with the existing bolts holding it on. Would probably need to drill the holes higher or lower vertically so that it can be adjusted a few inches up or down. Would be fairly time consuming I imagine.