Frequently Asked Questions About Skim Coat + Crucial Tips for a Long-Lasting Wall Finish
HTML-код
- Опубликовано: 26 мар 2023
- Skim coating is an essential step in finishing walls that involves applying a thin layer of joint compound or plaster over the surface to create a smooth and even surface. However, it is a task that can raise many questions for those who are unfamiliar with the process. In this video, we will address some of the most frequently asked questions (FAQs) about skim coating.
Skim coating is often misunderstood in the Philippines, mainly because there are a lot of misconceptions surrounding it. Some people believe that skim coating is unnecessary, while others think that it is only necessary for cosmetic purposes. In reality, skim coating is a critical step in wall finishing that helps to create a smooth and even surface that is ready for painting or wallpapering.
One reason why skim coating is misunderstood in the Philippines is that there are many different methods and techniques that can be used. Some people may be unfamiliar with the correct methodology, leading to improper application and a less-than-desirable outcome.
It is essential to know the right methodology in wall finishing because it ensures that the skim coating is applied correctly and that the final result is long-lasting and durable. Proper skim coating involves preparing the wall surface, applying the skim coat in thin layers, allowing each layer to dry before applying the next, and sanding the surface to create a smooth finish.
Using the right methodology also ensures that the skim coat adheres correctly to the wall surface, reducing the risk of peeling or cracking over time. It also ensures that the skim coat is applied evenly, creating a uniform surface that is ready for painting or wallpapering.
Using a high-quality skim coat is crucial to achieving a long-lasting and durable wall finish. This is particularly important in the Philippines, where the tropical climate can lead to humidity, heat, which can cause damage to poorly made wall finishes.
When using a high-quality skim coat, it is more likely to adhere well to the wall surface and create a smooth and even finish. High-quality skim coats typically have superior bonding properties, making them less likely to crack or peel over time.
In the Philippines, where there are a variety of skim coat options available in the market, choosing the right one is essential. It is important to select a skim coat that is specifically formulated for the local climate and conditions to ensure its effectiveness and longevity.
Additionally, a high-quality skim coat can save time and money in the long run. Cheaper alternatives may initially seem more cost-effective, but they may require additional coats or repairs, leading to more expenses and time wasted.
Using a high-quality skim coat in the Philippines is vital to achieving a long-lasting wall finish that can withstand the local climate and conditions. Investing in a reputable brand and selecting the right product can save time, money, and ensure a beautiful and durable wall finish for years to come.
Whether you are a DIY enthusiast looking to improve your wall finishing skills or a homeowner seeking to hire a professional, this video will provide valuable information to help you better understand the process of skim coating.
![Surprising Solution to Waterproof Exterior Walls From the Inside [Complete Guide]](http://i.ytimg.com/vi/D1eg5hg_AzE/mqdefault.jpg)
Very informative sir thanx
Most welcome
Salamat sa idea sir....
You're welcome.
Great video! very informative! Paano po kapag may mga Nail holes and other craters sa wall, paano pong repair before skimcoating?
For nail holes, you can use either RubberStop or Sapal 2 in 1, the only difference is that Sapal 2 in 1 is paintable while RubberStop is not. As for the wall craters, please send an actual photo of it through our official Facebook page facebook.com/BuildritePhils so that the product we can recommend is correct.
Parequest naman po ng stuuco finish ng exteriorvwall
Hi, thank you for your suggestion. We will look into it as a suggestion to our social media and creatives head.
How long should you wait after thick cement plastering before skim coating with tofil 802?
Hi, thank you for your inquiry. Let the new plaster cure for at least 3 days for exterior and 7 days for interior before applying skim coat.
What is the best products to use skim coat for cement blocks considering there are water coming in if the cement blocks get wet in heavy rain please help
And do you have any plastering ready to use without worrying about mixing?
I haven't seen any video showing how much water need to mix to make a plaster
Hi, thank you for your inquiry. If there is leak, then you need waterproofing materials. Please message us on our Facebook page so we can discuss your inquiry and we can recommend the right products for your needs: facebook.com/BuildritePhils
sir ask ko lng about sa floor,pwde ba gamitin yung buildrite epoxy catalyst/epoxy primer..hndi nmn kalakihan yung floor ng bahay,thanks
Hi! Thank you for your inquiry. May we know,
What do you want to achieve on your floor?
hi, can i use a gray skim coat to achieve an industrial/concrete type finish?
Hi, thank you for your inquiry. Yes, you can use skim coat gray and seal it with Buildrite Silox to achieve a matte water-repellent finish. You can watch this video for your reference: ruclips.net/video/4I3EUGfDkrs/видео.html
Nice one boss
We appreciate your comment.Thank you for supporting Buildrite.
Hello, does your skim coat work on aac blocks?
Good day! Yes, you can apply Tofil 801 to AAC BLOCKS as skimcoat.
shop.magnaprime.com.ph/search?q=tofil+801
Can gray skim coat (same type and brand) be used over a white skim coat?
Hi, thank you for your inquiry. Ano po ang gamit niyong skimcoat, sir?
👍👍👍👍👍👍
isang mapagpalang araw sayo sir, tanong ko lang sir sa rough finish na wall kung ano ang mauna skin coat? or primer? salamat..
Hi, thank you for your inquiry. Skim coat must be applied on bare concrete substrate. It will loose its adhesion strength and will cause powdering if applied to primed or coated wall.
Hi sir, ask lang po if pede gamitan ng sapal 2in1 ang wall namin not sure if sa skim coat kaya sya may crack or mismong wall cement 🥲
Hi, thank you for your inquiry. Please send us the pictures of the actual area on our official Facebook page so we can discuss your inquiry: facebook.com/BuildritePhils
Sir, no need n po b Ng primer(flatwall) pgnkaskimcoat? Pwede b siya diretso topcoat?
Hi. Thank you for your inquiry. Kung Tofil 802 skimcoat po ang gagamitin niyo. No need primer na po at pwede na mag Sapal rtu waterproofing po.
Hi sir. nag bitak2 po yong primer ko dahil d po dumikit ang d maganda ang pg skim coat ko sa wall or parang chalky. Pwedi po bang mag skim coat ulit sa mga part na may bitak?
Hi, thank you for your inquiry. Message us on our Facebook page so we can discuss your inquiry: facebook.com/BuildritePhils
Hi paano po pag gagamit ng gray skim coat para sa cement finish na wall accent? Ano pong kailangang sealer kung ayaw naming pinturahan?
Hi, thank you for your inquiry. You can use Buildrite Silox clear matte sealer. You can watch this video for your reference: ruclips.net/video/rCwFvTB__9c/видео.html
Sir...yung 802 pwede ba sa finish wall..? Im planning fir d.i.y sa bahay ko pra makatipid po. Thank you
Hi, thank you for your inquiry. Tofil 802 is applicable for smooth and rough bare concrete surfaces.
sir after skimcoat ano po ba ang the best primer, salamat po
Hi.Thank you for your inquiry. Tofil 803 po sir after Tofil 801.
Sir, may tanong oang po ako para sigurado, pwedi po ba e apply ang skimcoat powder water base sa hardiflex? thanks
Hi, Thank you for your comment. For fiber cement board, we recommend Putty Master. It is a multi-purpose ready to use smooth base preparation for a wide range of non-structural filling, leveling, patching and repair jobs on wood, concrete, fiber cement and fiber boards.
shop.magnaprime.com.ph/search?q=Putty+Master
Sa interior wall po na need mag water proofing, unahin po ba muna skim coat then waterproofing?
Hi, thank you for your inquiry. Waterproofing po muna bago skim coat. Either Crystor or Flexor, depende kung anong floor level ng wall.
meron po ba kayo marecomend na contructor para sa skimcoat san miguel bulacan
Hi, thank you for your inquiry. Please message us directly to our official facebook page : facebook.com/BuildritePhils so we can assist you regarding your inquiry.
Hello po. Tanong lang po, how to repair po yung corners ng post at surface ng wall kasi nung nag apply ng tofil 804, hindi po maganda yung pagkaapply. Hindi straight ang corners ng poste tsaka hindi makinis yung sa walls. Ano pong need gawin bago patungan ulit ng tofil 804 para po gumanda finish nya?
Hi, thank you for your inquiry. We need more information about your inquiry. Please message us on our Facebook page so we can assist you: facebook.com/BuildritePhils
Sir.. pede mag apply ng skimcoat s wall n may dati ng paint. ? Ng bulpos n o ng parang bubbles n ang lumang paint. Mg repaint po kami pede b mg skim coat s wall painted na?
Hi, thank you for your inquiry. No, Skim coat must be applied on bare concrete substrate. It will loose its adhesion strength and will cause powdering if applied to primed or coated wall.
2q: 3 days pwede na e apply ang skim coat sa labas 7 days sa loob.
Hindi po pwede yan dahil hindi pa totally cure yong seminto.
Mag ka crack ng mag ka crack po yan. At hindi po totoong pag gusto mong magmadali gumamit ka ng skim coat.
1st. Option naming mga pintor ay lasonin ang seminto para lumitaw agaw ug mga crack tapos pinupunasan namin ng tubig gamit roller para maalis yong mga acid ng lason or neutralizer.tapos mamasilyahan yong mga crack ng concrete epoxy.tska mag skim coat.
2nd.pinapahiran muna namin ng flexibond ang buong seminto bago mag skim coat. Bakit?. Para pag nag crack yong seminto mapipigal ng flexibond.
3rd. Yong sinasabi niyo na proseso pero matatagal po kasi kada araw may panibago na namang crack.
2nd question :bakit nag pupulbos ang skim coat.?
Dahil po yan sa liha nililiha po kasi ng pintor yan bago aplayan ng primer, yong ibang pintor para maging madali trabaho nila hindi na nila pinupunasan ang skim coat nirerekta na nilang aplayan ng primer kaya hindi solid ang kapit ng primer at natatanggal.
Kaya sa mga nakabasa nito kung may pera kayo at bahay nyo ang pipinturan. I recommend ipa smooth finish nyo bahay nyo at solvent base na pintura gamitin nyo 10-20 years dpende sa pag prepara ng pintor bago kukupas pintura nyo .
At kung commercial building naman papipinturahan nyo i recommend skim coat nalang tsaka water base paint para maka mura kayo.yong lang po salamat.
Hi, thank you for sharing your opinion. Kaya gumagamit ng skimcoat ay para maging smooth ang finish ng concrete and with the added polymer sa skimcoat naeenhance nya yung adhesion property even though wala pa sa 28 days ang concrete.
Gud day sir ask lang makinis na po yung pader using purong semento kakapit pa po yung skim coat?
Hi, thank you for your inquiry. Yes, as long as bare concrete pa yung wall ay kakapit po ang skim coat.
Sir, pwede ba waterproofing muna ang ilagay bago skimcoat. Ty.
Hi.Thank you for your inquiry. Kapag sa indoor wall po waterproofing po muna bago mag skimcoat.Kapag sa outdoor po skimcoat po muna bago mag waterproofing.
Sir, Pwede po bang magpintura ng water sealant after applying skim coat?
Hi, thank you for your inquiry. Waterproofing po ba? If waterproofing paint, pwede po Sapal RTU: ruclips.net/video/xAjmaqVoXUs/видео.html
Pwede rin pong, clear matte sealer na Silox: ruclips.net/video/4I3EUGfDkrs/видео.html
Buong fire wall may skim coat paa o po gagawin kung nag pupulbos na ito dapat bang tanggalin buong skim coat o may ipapahid para dito
Hi, thank you for your inquiry. Proper assessment and surface preparation are needed before using Tofil 806. Please respond to our direct message so we can discuss your inquiry: facebook.com/BuildritePhils
hello Sir! pano po ba i-cure ang skim coat? kasi po di ba, pag concrete, babasain mo lang sya lagi. ganun din po ba pag skim coat?
Hi, thank you for your inquiry. Buildrite Tofil 801 application:
Apply the mixture using a stainless-steel filling knife or trowel up to 3mm thick.
Two separate coats must be applied for a successful
resurfacing. (First layer as a primer to fill up all minor
defects).
Allow to set at least 30 minutes between coats.
Pre-covering curing time at least 24 hours.
Note: Drying and curing will be dependent on
application thickness, substrate condition and
atmospheric conditions.
Sir meron po ba kayong tofil 802 dito sa davao city balak ko po bibili Nyan.
Hi, thank you for your inquiry. I-check ko po ang stocks. Ilan po ang kailangan nyo, sir? At anong kulay po?
Sir anay finish ang wall ko. Gusto ko maging makinis at malinis ang wall. Pwede bang rektang skim coat then pintura?
Hi, thank you for your inquiry. You can use Tofil 801 skim coat SF for thin application up to 3mm thickness only of Tofil 802 paste type skim coat for up to 4m thickness only.
Boss pwede bng ihalo sa masonry putty jan sa skim coat t.y
Hi, thanks for your comment. Hindi po puwede haluan ng kahit ano ang Tofil 802, maliban nalang sa Tofil 801 na tubig lang ang dapat ihalo.
Nakapag first coating na po ng pintura primer sa pader pwede pa po bng patungan ng skim coat ung pader?
Hi, thank you for your inquiry. Kailangan po munang alisin ang existing paint prior sa application ng Tofil 801/Tofil 802 skimcoat.
Boss ano ang minimum and maximum overcoating interval skimcoat to primer coat. Salamat
Hi, thank you for your inquiry. Let the skim coat cure for at least 3 days for exterior and 7 days for interior before applying paint.
hi sir. ask ko lang po..after skim coat po need p po ba mag flat latex?
Hi, thank you for your inquiry. For interiorwall, we recommend Buildrite Tofil 803 primer and sealer instead of using flat latex before applying the top coat. You can see this post for your reference: facebook.com/BuildritePhils/photos/a.256515081150962/2283951938407256/
For exterior wall, you can use Buildrite Sapal RTU primer, sealer, and waterproofing paint in one. You can watch this video for your reference: ruclips.net/video/xAjmaqVoXUs/видео.html
Hello po. Sana meron kayo stocks ng buildrite sa city hardware or sa home builders. Maganda sana product nyo po pero walang mabili sa cebu city at sa ibang lugar. Sa manila lang available
Hi, thank you for your inquiry. Selected Buildrite products are available in the following stores:
-Cebu Home Builders Banilad
-Cebu Home Builders Consolacion
-Cebu Home Builders Pardo
-Cebu Home Builders Mactan
-Cebu Home Builders Minglanilla
may interior wall po kami na matagal na naka skim coat hindi pa naliha at hindi na pinturahan yung half part yung other half dati ng may paint ano po magandang gawin para marepair yung buong wall kasi yung part na may dati ng paint eh may mga part na nagtutuklap na kasi dati wala pang waterproofing yung labas. Maliit lang kasi yung wall kaya gusto ko sana DIY na lang.. :)
Hi, thank you for your inquiry. We recommend to removed and replace your skim ccoat before re-painting. Also, make sure that your exterior wall is waterproof.
Ok po ba yong flat latex white + stickwel + Patching compound ang i aaplay sa pag batak sa rough na pader?
At ok lang po ba yong ginawa ng pintor na flat latex white + stickwel + patching compound ay mejo basa/matubig. Kasi sa mga nakikita ko sa mga video subrang sticky po ang kanilang pag apply. Tama po ba ang ginawa ng pintor namin?
Hi, thank you for your inquiry. Wala po ito sa methodology namin na sumusunod sa European standard. Hindi po namin masasabing mali ito dahil wala sa methodology namin, pero based po sa sinabi nyo ay may risk ito ng cracking and delamination.
Nako sir mali po yon..paintor po Ako .
Pinaka the best talaga sa rough finish skim coat ,tapos solvent primer gamitin nyo.
Of tofil 802 lng at wala ng top coat, pano po process at ilang taon need to reapply tofil 802 again pag nag fade na po?
Hi, thank you for your inquiry. Tofil 802 is an acrylic based skim coat that serves as skim coat and paint in one. However, it is not waterproof. Re-application depends on proper assessment and proper surface preparation is needed. Skimcoat over skimcoat can only be resurfaced using the same method of surface preparation, including light sanding and water spraying prior to application. Before applying another coat of skimcoat, you should take into account the current state of your skimcoat, including if it is chalky, has dust present, or has portions that are flaking
Hi sir pag naka purong cemento na ang mga pader pwede pa ba e skimcoat ? Maraming salamat ho
Hi. Thank you for your inquiry. Yes pwede po sir. Meron po kami ready to use paste type Tofil 802 no need primer.
BUILDRITE TOFIL 802 (Pail - White)
Regular price₱1,495.00
shop.magnaprime.com.ph/products/buildrite-tofil-802-pail-white?_pos=1&_sid=f7d424236&_ss=r
BUILDRITE TOFIL 802 (Pail - White)
Pwede po ba ang Tofil 802 after Plexibond?
Hi, thank you for your inquiry. Yes. However, for waterproofing the exterior walls, we recommend Buildrite Sapal RTu primer, sealer, and waterproofing paint in one. Apply skim coat first before applying Sapal RTU. You can watch this video for your reference: ruclips.net/video/xAjmaqVoXUs/видео.html
Kapag po mag wawater proofing paint, Kakapit parin po ba ang skim coat?
Ano pong dapat mauna sa kanilang dalawa?
Hi, thank you for your inquiry. For exterior wall waterproofing, it should be the skim coat to be applied first before Sapal RTU primer, sealer, and waterproofing paint in one. You can watch this video for your reference: ruclips.net/video/xAjmaqVoXUs/видео.html
anong na una skimcoat oh waterproofing like concreto bond or plexibond?
Hi, thank you for your inquiry. For exterior wall, we recommend applying Skim coat first before applying waterproofing. We do not recommend using cementitious waterproofing on walls, what we recommend is Sapal RTU primer, sealer, and waterproofing paint in one. You can watch this video for your reference: ruclips.net/video/xAjmaqVoXUs/видео.html
@@BUILDRITECONSTRUCTIONCHEMICALS maraming salamat po.
You're welcome.
Sir pede po ba mag pahid ng skimcoat sa wall na may paint na enamel
Thanks po sa answer
Hi, thank you for your inquiry. No, sir. Skim coat must be applied on bare concrete substrate. It will loose its adhesion strength and will cause powdering if applied to primed or coated wall.
Tanong lng po mas mkakatipid ba mag skim coat sa rough finish na wall kesa smooth finish at pareho lng po b ng magiging resulta?
Hi, thank you for your inquiry. Regardless kung rough or smooth po ang surface, ang maximum thickness ng skim coat is up to 3mm only.
Boss ok poh bah interior unah ang acrytex tapos skim coat?
Hi, thank you for your inquiry. Acrytex and skim coat are not compatible. It can cause chemical reaction when you apply acrytex over skim coat.
Sir san maganda iapply ang skimcoat.,finiah or rought.t.y
Hi.Thank you for your inquiry.Mas maganda po sir naka finish po yung wall bago po mag apply ng skimcoat.
Hi.Thank you for your inquiry.Mas maganda po sir naka finish po yung wall bago po mag apply ng skimcoat.
Sir ano po kayang pwedeng gawin pag may skimcoat n yung pader pero nagpupulbos?
Hi, thank you for your inquiry. Proper assessent and surface are needed with this situtation. Please message us on our Facebook page so we can discuss your inquiry: facebook.com/BuildritePhils
Anong klasing pintura po ang pwd gamitin after ng skin coat
Hi, thank you for your inquiry. For exterior walls, we recommend Buildrite Sapal RTU primer, sealer, and waterproofing paint in one. For interior walls, you can use Buildrite Tofil 803.
Hello, Sir! Rough or smooth finish ba ang wall before skim coating? Thank you po!
Magandang Araw! Yes po, after ng palitada, puwede niyo ng lapatan ng skimcoat ang wall.
Rough finish sir then scrape mo lng Yung surface bago mg apply Ng skmicoat
Pwede pa po ba mag apply ng skim coat sa wall kung una ng napinturahan ang wall.?
Sir pwede po ba ang skim coat sa fiber cement board or drywall gypsum board?
Hi.Thank you for your inquiry. Yes po sir pwede po.
@@BUILDRITECONSTRUCTIONCHEMICALS hello po. May distributor na po ba kau sa Pangasinan? Pwede po makuha lists ng mga hardwares na nagbebenta ng mga products nyo in Pangasinan kung meron po. Salamat
Hi! Selected Buildrite products are available at Rkt Marketing Mangaldan, Pangasinan. However, you can send to us your contact detail on our official facebook page: facebook.com/BuildritePhils so we can help you by checking the stocks of your product needs.
Sir follow up question...after applying 802 paste skim coat., and after sanding or liha....pwede na top coat?? Salamat
Hi, thank you for your inquiry. You can apply paint over skim coat after 3 days for exterior and 7 days for interior.
Pwd bang hnd na magwater froping deritso skim koat na. Lalo na sa fire wall
Hi.Thank you for your inquiry. Kailangan po sa firewall sir 3 days after skimcoat po mag apply ng sapal rtu waterproofing.
ruclips.net/video/_fTotxWasao/видео.htmlsi=LrICf6RpmpBaXV4v
Sir anung skim coat pwede sa rough na pader,tnx po
Hi.Thank you for your inquiry.May 2 types skimcoat po kami sir TOFIL 802 ready to use skimcoat at powder type Tofil 801 Skimcoat.
Pwde ba mg apply nng skim cout kung nka pinturahan na.bali tatakpan mu lng ung luma na pintura sa wall
Hi, thank you for your inquiry. No, Skim coat must be applied on bare concrete substrate. It will loose its adhesion strength and will cause powdering if applied to primed or coated wall.
Sir pwd po ba e skim coat yung wall na may glossy paint? Ano po ba tamang gawin
Hi, thank you for your inquiry. Kailangan po munang alisin ang existing paint bago mag-apply ng skimcoat using Tofil 802 sa wall.
shop.magnaprime.com.ph/search?q=Tofil+802
Kung day 1 ako magskimcoat, gaano katagal ako pwede magsimula ng paint? 30 days? 60 days? Nagskimcoat na kasi kami pero di pa kami nakakapili ng pintura na gusto namin
Hi! Thank you for your inquiry. Using Tofil 801, let it cure for 3 days before sanding and applying paint. you can watch this video for your reference: ruclips.net/video/jBhAqbktKrw/видео.html
@@BUILDRITECONSTRUCTIONCHEMICALS Narinig ko po yung tofil 801 sa video.
Pakisagot na lang ng original na tanong ko boss.
You can paint the wall with skimcoat after 3 days on exterior applications.
Sir pwede ba topcoat agad after skimcoat hindi n magprimer
Magandang Araw! Mas mainam kung mag a-apply ng primer bago ang topcoat paint kung ito ay para sa interior wall. Puwede kang gumamit ng Tofil 803 water-based primer and sealer for all types of masonry, concrete, bricks and dry wall.
shop.magnaprime.com.ph/search?q=Tofil+803
Tanong lng po kelangan ba talaga lihaan ang skimcoat bago pinturahab? 1:43
Hi.Thank you for your inquiry.Yes po sir.
Paano po kung di palitada ang padee pwede ba gumamit nyan?
Hi, thank you for your inquiry. Thick plastering (palitada) po muna dapat bago mag skim coat kung hollow blocks wall po.
Can we use skim coat on an already painted wall?
Hi.Thank you for your inquiry. Mas maganda po muna tanggalin yung paint para kumapit po yung skimcoat.
@@BUILDRITECONSTRUCTIONCHEMICALS ano Po pwedeng gamitin sa may pintura nang wall pero uneven at may mga cracks pa
Please message us on our Facebook page: facebook.com/BuildritePhils
Sir,ano po ba magandang ipahid sa pader na makinis o ung firewall?bumibitaw Kasi si Skiam Coat.sana po mapansin tanong ko.
Hi. Thank you for your inquiry. Nag cha-chalky po ba o nababaklas po mismo ang skimcoat?
Nabaklas po sya.cguro dahil sa kapal nya?ano po ba magandang gawin?
Up to 3-4mm thickness lang po recommended ang skim coat. Remove and replace na po para dito.
Sa firewall po I recommend flexibond mo muna Bago mo masilyahan.
pwede po ba mag apply ng skim coat kahit may pintura na ang pader
Hi.Thank you for your inquiry. No ma'am kailangan po muna tanggalin ang existing paint bago mag apply ng skimcoat para po mas makapit.
Pwede po ba mag skimcoat if the wall is finish plastered ma po thank you po
Hi, thank you for your inquiry. Yes, pwede po as long as wala pang any existing coating, sealer, or paint.
Nako wag po Wala pong kapit Yan promise.
ung sahig po nmn nagfoform ng alge at amag pano po kaya solution dun?
Hi, thank you for your inquiry. One possible reason is moisture. Proper assessment is needed to be able to know the main cause of this problem. Please send us a direct message so we can discuss your inquiry: facebook.com/BuildritePhils
pag tpos mag skimcoat ilan araw bago pwede mag primer ng pintura????
Hi, thank you for your inquiry. You can apply paint over skim coat after 3 days for exterior and 7 days for interior.
@@BUILDRITECONSTRUCTIONCHEMICALSkahit wla na po bang primer ok lng or masmaganda po bang gamitan ng sealer kesa primer ang skim coat?
Where can we order po if from Davao City?
Hi, you can order online via our Magna Prime Shop (bit.ly/3D8vqLx), official Lazada and Shopee shop (s.lazada.com.ph/s.fFwNe) or you may send to us your exact address via our Facebook page for us to assist you in locating the nearest store in your area: facebook.com/BuildritePhils
pede po ba tofil 801 un first coat then tofil 804 un 2nd coat?
Hi, thank you for your inquiry. Para sa anong particular area po balak i-apply, sir.
interior cement wall
Kahit Tofil 801 nalang po, ma'am. Ano din po pala ang balak ma-achieve?
Tanong lng po, kelangan pa po bang i-primer muna ang skim coat bago top paint? Salamat po sa response in advance 😊
Hi, thank you for your inquiry. Yes, required pa rin pong mag primer kung Tofil 801 ang gagamitin nyo na skim coat. Pero kung Tofil 802 po, pwede na direct top coat.
Bakit po matigas lihain yung skimcoat sa walling kahit kaka masilya lang? Bakit po kaya?
Hi, thank you for your inquiry. Please message us on our Facebook page so we can discuss your inquiry: facebook.com/BuildritePhils
Ok lang Po ba na Hindi na mag apply Ng skim coat sa outdoor ?ok lang ba sa indoor lang? Ano Po dapat?salamat
Hi.Thank you for your inquiry.Mas maganda po sir may skimcoat para maging smooth yung wall bago po pinturahan.
@@BUILDRITECONSTRUCTIONCHEMICALS maraming salamat po.Marami kasi nagsabi at nag suggest na pwede na daw po hindi lagyan ng skim coat sa outdoor kasi daw po masasayang lang daw po kasi daw po ay expose sa init at ulan at eventually matatanggal daw din daw po ang pintura, so Sabi Nila kahit wala nalang daw skim coat at pintura na daw directly po basta daw ang finishing o plastering ay maayos at makinis? Gaano po ito katotoo? Salamat po.
Pwede naman po sir hindi mag skimcoat kung okay na po sa inyo yung finish ng palitada ng wall.
@@BUILDRITECONSTRUCTIONCHEMICALS OK po maraming salamat. Looking forward po sa mga next videos ninyo, salamat po
You're welcome po. Thank you!
Nagkamali ang tao ko at ginamit ang interior type na skim coat. Pwede kaya patungan lang ng exterior type skim coat at di na alisin?
Hi, thank you for your inquiry. Anong skimcoat po ang inapply, sir?
Puwede po kayong mag message directly sa aming official facebook page na: facebook.com/BuildritePhils para sa iba pang detalye tungkol sa inyong inquiry.
Paano po kung may skim coat na ano dpt gawan para hindi tumagas sa pader.
Hi, thank you for your inquiry. For exterior wall waterproofing, we recommend Buildrite Sapal RTU primer, sealer, and waterproofing paint in one. You can watch this video for your reference: ruclips.net/video/xAjmaqVoXUs/видео.html
Kait may skim coat sir pwedeng lagyan nag sapal RTU.
Yes, sir, ito ay kung gusto niyong makinis ang kalabasan ng finish ng ilalapat na Sapal RTU.
Mas maganda bang mag skim coat sa rough na pader?
Hi, thank you for your inquiry. Maaari po kayong mag skim coat sa rough o sa makinis na pader basta wala pa po itong existing na pintura o sealer.
pwedi ba skim coat sa plywood
Good day! For plywood you can use Putty Master. BUILDRITE PUTTY MASTER is a multi-purpose ready to use smooth base preparation for a wide range of non-structural filling, leveling, patching and repair jobs on wood, concrete, fiber cement and fiber boards.
shop.magnaprime.com.ph/search?q=putty+master
Maganda ang product kaso mahirap ma access except online ung pinapanghalo sa sapal na pang kulay wala ako makita sa shoppee 😢
Hi, Thank you for your inquiry. You can order online via our Magna Prime Shop (bit.ly/3D8vqLx) , official Lazada and Shopee shop (shp.ee/4qyr3gy) (s.lazada.com.ph/s.fFwNe) or you may send to us your exact address to our official facebook page facebook.com/BuildritePhils and we will be more than glad to help you find the nearest store or hardware where you can buy our products
Pwd ba gamitin ang skimcoat sa puro finish na wall?
Kasi sabi nila skimcoat para lng sa naka rough finish. Kasi natatanggal sya pag ilagay sa puro finish
Magandang Araw! Yes, puwede po ang Tofil 801 o Tofil 802 sa naka palitadang wall.
Hindi ba natutuklap ang skimcoat kapag nkasmooth finish ang wall
Hi, thank you for your inquiry. As long as bare concrete po yung inapplyan, wala pong problem sa adhesion yung skim coat.
Sir ok lng po ba pahiran ng skimcoat? Kahit my flat latex npo?
Hi, thank you for your inquiry. Skim coat must be applied on bare concrete substrate. It will loose its adhesion strength and will cause powdering if applied to primed or coated wall.