Hi thanks so much - my clock spring is gone and my horn only works in certain position - occasionally- can you please do a video of how to bypass and use a toggle switch - in particular which colour wire and is it live or earth - thanks really appreciate
Great. Could you also do a quick one how to fix steering wheel adjustment? When locked my steering column moves up and down freely, so I cannot raise my steering wheel and keep it at desired level. Micra K12.
If you pause the video at 2:32 you can see where the nuts are fixed to the rear of the airbag. The nut must have broken away from the unit and is now rotating with the screw. I'm not sure how to remove that to be honest.
Hi thanks so much - my clock spring is gone and my horn only works in certain position - occasionally- can you please do a video of how to bypass and use a toggle switch - in particular which colour wire and is it live or earth - thanks really appreciate
Thanks for sharing this important info
Thanks a lot Can you please do one on how to change the bulbs in the speedometer please for nissan micra
Which bulbs have failed ?
Great. Could you also do a quick one how to fix steering wheel adjustment? When locked my steering column moves up and down freely, so I cannot raise my steering wheel and keep it at desired level. Micra K12.
Is the adjuster lever under the steering column fully locked into place ?
Hi the torx screw was slightly stripped when I came to it and very tight, I managed to strip it more and I can’t get it out. Any advice?
You'll probably have to use one of those screw extraction tools like this one: ruclips.net/video/tbjAeHTMipE/видео.html
@@screwsnutsandbolts Managed to get it out, but now i got an airbag light and doing the reset doesnt seem to work
I have one retaining screw that doesnt go out it just turns and stay in the same position any idea how to remove it?
The screw is definitely rotating in there ?
If you pause the video at 2:32 you can see where the nuts are fixed to the rear of the airbag. The nut must have broken away from the unit and is now rotating with the screw. I'm not sure how to remove that to be honest.
👌
Thanks !
Tanke you very much for explication 👍✌️🌹
No problem 👍