How To Install USB-C Dual Quick Charging Port In Your Car - Upgrade

How to install a USB type-C Dual Quick charge port in the back seat area of the car. Success… Everything you need to know is in this video. Simple tools and a good quick charger are key. Easy to install instructions here and I am very pleased with the outcome!!!
Subscribe if you enjoyed 👍🏼
“As an Amazon Associate, I earn from qualifying purchases.”
---------------👇🏼
Click Link For Trim Tools (Tresalto)
www.amazon.com/dp/B01EXZKHWI/...
USB Charger (Qidoe) Dual Type C
amzn.to/3YWJWkt
Circuit Test Light
amzn.to/3I67SuT
Hole Saw 1 1/8 or 29mm
amzn.to/43ZqYf9
#howto #qidoe #quickcharge #12vusb #dualport #typec #installation #diy #typec #usbtypec #usbport
Channel Disclaimer:
Due to factors beyond the control of
JMS GrindItOut, I cannot guarantee
against improper use or unauthorized
modifications of this information. JMS GrindItOut assumes no liability for
property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. JMS GrindItOut recommends safe
practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of JMS GrindItOut, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage,
or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not JMS GrindItOut.
Contact Info:
[e-mail]

[@djgarrison3736]

These videos really help take the headaches out of many types of installations. Keep following. Good stuff.

[@peb9840]

gonna try this on my ‘00 honda civic lx 🙏

[@grind-it-out]

😎💯👍🏼

[@caseG80]

Drilling the hole in reverse will save having to clean it up with sandpaper

[@grind-it-out]

That works also. Yes thanks

[@bengeorge2]

Man I love this channel as a fellow Passat owner!!

[@grind-it-out]

Wow!!! Great compliment. I’m just a regular guy trying to do stuff myself. Very happy to know. More vids coming soon. 😁

[@vasquezmarv]

How would you go about pig tailing off an existing cigarette lighter to a second port using the same product you used here

[@grind-it-out]

I believe you can do that. It shouldn’t be an issue

[@PaulieM]

Can you link to the hole saw that you used?

[@grind-it-out]

Yes I can. 1 1/8 in or 29mm. Here is link. I looked for a reasonable priced one for you. It will work great.
Also would you consider subscribing? It really helps the channel. 😎💯👍🏼
amzn.to/43ZqYf9

[@grind-it-out]

I also added that in the description just now 😊 thanks

[@PaulieM]

@@grind-it-out Thank you! Subscribed. Looking forward to trying it out.

[@grind-it-out]

One thing I didn’t mention. If you cut the hole in the plastic, do it in reverse. It will be a smoother cut. Just put your drill in reverse and the teeth on the hole saw won’t chew it up as much. Thanks for subscribing. Good luck 👍🏼😎💯

[@PaulieM]

@@grind-it-out Thanks! Will try it when the car is back home. Wife has taken it to France.

[@anilphilip546]

Instead of drilling a hole, why not replace the cigarette lighter? Can you please explain how to do it?

[@grind-it-out]

There was no hole. I created a new hole. The cigarette lighter is inside the console. I tapped into those wires to run my usb port. If you have a cigarette lighter hole you can use that but you still have to drill the existing hole to make bigger to fit usb port

[@grind-it-out]

I did that in the front cigarette lighter. Just remove it then drill a little bigger and connect the cigarette lighter wires to the usb wires. Exactly like I did in the video.

[@tylerunderwood4193]

Not a type-c

[@grind-it-out]

It has two ports

[@vamoneygroup]

If you want a type c, buy a type c.

[@crn44]

it has type c and usb port

[@grind-it-out]

Exactly