To use the .16 engine on the Forza you have to install the 2 speed clutch system from .18 engine. We do sell the 1 speed transmission, it cane be found under the spare parts for the Hyper Speed.
Just did this to my HSP Stealth, great video, helped a bunch. I feel like I'm going to be doing this a lot unless I upgrade to some quality metal ones.
Bro I wish you had 3 million subs you help me out so much today it’s unbelievable and save me so much money please make more nitro videos thank you so much
You should be able to use the 2 speed transmission and parts from the Forza on the Infinitive, they use the same chassis so it should bolt up just fine.
Hey idk if you guys still check the comments on these old videos but I have a question. So I stripped the larger gear on my 2 speed transmission from my Rally Monster. I decided to take out the engine from the Rally Monster and drop it into my Hyper Speed (since the engine is ruined in my Hyper Speed). I put the clutch bell from the 1 speed transmission onto the .18 engine, but it seems to be a tiny bit looser than before (not much, the gears stay aligned but there's a tiny but of play). Is this bad?
video was more understandable then redcats thank you I had a heck of a time trying to get my dog bones back into the transmission and now I know how to do it thanks guys
I have a car toy from hella long ago. An Eztec Lincoln navigator with MP3. I wanna strip the whole thing and customize it and add an engine like this car. Is that possible? What do I need? The engine the transmission? I dont know much about rc cars
I have the Forza and have bought a .16 engine for testing. The .16 is single speed. Would it be OK to use that with the Forzas 2 speed transmission or would i have to get the one speed. And does nitro rcx have 1 speed transmissions for sale?
Hi today I striped my second gearbox. The first time I didn't have my engine Tuned right and at idle the wheels were spinning quite fast, so if I hit a wall the engine would strip the gears. Since then I have replace the gearbox and tuned it correctly. However for some reason the larger gear on my my 2 speed box has just stripped away. Now I can put this down to two possible reasons, the first is that I was starting the car with the wheels on the ground, and the second is that I did not have the gearbox meshed correctly. Can anyone give some advice as to which is the most likely cause, and if there are other possible reasons as to why the gear may have stripped. Thanks.
It could be because your engine bolts are coming loose due to the engine vibration,I stripped 3 gearboxes because of this. To fix this use some medium strength loctite on your engine screws and make sure you get the gear mesh right as well. Hope I helped
Thanks for the help. A question in relation to the gear meshing, after I have meshed the gears I push it forward and backwards to make sure it sounds ok. Now when I push it forward it sounds fine, however when I push it backwards, 2 things happen. When the gears are meshed really close together, it is hard to push the car backwards and it makes some noise. When it is meshed a little looser, i push the car backwards the 2 gears on the engine and the gearbox continue to spin freely for a few seconds. Is this normal. Please help lol. Thanks
To use the .16 engine on the Forza you have to install the 2 speed clutch system from .18 engine. We do sell the 1 speed transmission, it cane be found under the spare parts for the Hyper Speed.
buddy the best tutorial for these cars (break down and rebuild). thanks for a quicker way of taking gear box
Just did this to my HSP Stealth, great video, helped a bunch. I feel like I'm going to be doing this a lot unless I upgrade to some quality metal ones.
What fuel are you using the buggy and what settings do you have on the high and low speed needles?
Bro I wish you had 3 million subs you help me out so much today it’s unbelievable and save me so much money please make more nitro videos thank you so much
You should be able to use the 2 speed transmission and parts from the Forza on the Infinitive, they use the same chassis so it should bolt up just fine.
Hey idk if you guys still check the comments on these old videos but I have a question. So I stripped the larger gear on my 2 speed transmission from my Rally Monster. I decided to take out the engine from the Rally Monster and drop it into my Hyper Speed (since the engine is ruined in my Hyper Speed). I put the clutch bell from the 1 speed transmission onto the .18 engine, but it seems to be a tiny bit looser than before (not much, the gears stay aligned but there's a tiny but of play). Is this bad?
video was more understandable then redcats thank you I had a heck of a time trying to get my dog bones back into the transmission and now I know how to do it thanks guys
I have a car toy from hella long ago. An Eztec Lincoln navigator with MP3. I wanna strip the whole thing and customize it and add an engine like this car. Is that possible? What do I need? The engine the transmission? I dont know much about rc cars
I was wondering if its possible to install a two gear transmission onto the infinity which is a one gear?
My gears are stripped and arnt tricking my one millimetre how do I fix that
I have the Forza and have bought a .16 engine for testing. The .16 is single speed. Would it be OK to use that with the Forzas 2 speed transmission or would i have to get the one speed. And does nitro rcx have 1 speed transmissions for sale?
So if i change the transmission on the infinity to a two gear will it improve performance wise or what happens?
were do you buy the transmission and wats the code on your site
the silver thing in my transmission is loose how do i tighten it so it dont fall out if i have a roll over
Is thAt from exceed RC cuz if it is I have the same one but a different color
hallo :) are the GO engines good???
excelente video me han despejado muchas dudas con respecto a la transmision gracias
Hi today I striped my second gearbox. The first time I didn't have my engine Tuned right and at idle the wheels were spinning quite fast, so if I hit a wall the engine would strip the gears. Since then I have replace the gearbox and tuned it correctly. However for some reason the larger gear on my my 2 speed box has just stripped away. Now I can put this down to two possible reasons, the first is that I was starting the car with the wheels on the ground, and the second is that I did not have the gearbox meshed correctly. Can anyone give some advice as to which is the most likely cause, and if there are other possible reasons as to why the gear may have stripped. Thanks.
It could be because your engine bolts are coming loose due to the engine vibration,I stripped 3 gearboxes because of this. To fix this use some medium strength loctite on your engine screws and make sure you get the gear mesh right as well. Hope I helped
Thanks for the help. A question in relation to the gear meshing, after I have meshed the gears I push it forward and backwards to make sure it sounds ok. Now when I push it forward it sounds fine, however when I push it backwards, 2 things happen. When the gears are meshed really close together, it is hard to push the car backwards and it makes some noise. When it is meshed a little looser, i push the car backwards the 2 gears on the engine and the gearbox continue to spin freely for a few seconds. Is this normal. Please help lol. Thanks
OldElPaso yes I have a good gear mesh and the gears still spin when I push it backwards. It's because of the one way bearing in the gear box
can you get a two speed transmission on a madstorm??
Can one speed transmission be faster than 2 speed cars nitro fuel vs nitro fuel and nitro fuel vs electric?
At the moment we don't offer a 2 speed transmission kit for the Mad Storm.
hi anyone know how steering control setup info please or a guide
how would can i convert my hyperspeed to a 2 speed? is there a way?
What size is rear dogbone
Yeah I am missing both of them, have you found out yet?
@@derekquintero1933 yes I'll see if I can find my paperwork
@@fishingwithwild thank you!
@@derekquintero1933 61mm for 1/10 RC Hobby Model Car hsp Wltoy Redcat 4PCS/Set
My rally monster will rev but won’t go forward just smokes out the exhaust 1 didn’t even get to drive it for 10 minutes after I got it
Can I put a 2 speed on my exceed rc hyper speed
love your guyes vids!!!!!! great job on vid!
My nitro car wont start i bought the 1/10 exceed rc buggy hyper speed and im thinking of returning it
Hey why is my pull start so soft
You'll get a higher top speed.
great video.
Thank you!
text mistake in title
@TheSaltysack No way lol. These are crap compared to Traxxas and HPI. Trust me.
@jomesy1 jess.
1st COMMENT HELL YEA BITHES
can you install a two speed transmission in a one speed transmission nitro buggy??
+Trevor Burgart thank you for the info Trevor... i ended up buying tornado s30
hi anyone know how steering control setup info please
hi anyone know how steering control setup info please